Cellet XG01

Cellet Wireless Bluetooth Earbuds Model XG01 User Manual

Model: XG01 | Brand: Cellet

소개

This manual provides comprehensive instructions for the Cellet Wireless Bluetooth Earbuds Model XG01. Please read this manual carefully before using the product to ensure proper operation and to maximize your user experience. Keep this manual for future reference.

The Cellet Wireless Bluetooth Earbuds feature V5.0 Bluetooth technology for stable connections, noise-isolating design for high-quality sound, and built-in dual microphones for clear communication. They come with a convenient charging case and multiple ear tip sizes for comfort.

Cellet Wireless Bluetooth Earbuds XG01 package contents

Image: Package contents including earbuds, charging case, USB-C cable, user guide, and ear caps.

패키지 내용

  • Wireless Bluetooth Earbuds (Left and Right)
  • 충전 케이스
  • USB-C 충전 케이블
  • 사용자 설명서
  • Ear Caps (Small, Medium, Large)

설정

1. 초기 충전

Before first use, fully charge the earbuds and the charging case. Connect the provided USB-C cable to the charging case and a power source. The LED indicators on the charging case will show the charging status.

Cellet Wireless Bluetooth Earbuds XG01 charging case with specifications

Image: The charging case with earbuds inside, illustrating the charging process and displaying key specifications like Bluetooth version, battery capacity, and talk/music time.

2. 기기와 페어링

  1. 충전 케이스에서 이어버드 두 개를 모두 꺼내세요. 이어버드가 자동으로 켜지면서 파란색 표시등이 켜집니다.
  2. Wait for the voice prompt "Pairing, Left Channel, Right Channel." This confirms the earbuds are synced with each other.
  3. 기기(스마트폰, 태블릿 등)에서 Bluetooth 설정으로 이동하세요.
  4. 검색 "Cellet_EB600" in the list of available Bluetooth devices.
  5. Select "Cellet_EB600" to connect. Once connected, both earbuds will flash blue approximately every 8 seconds.

If pairing fails, place the earbuds back into the charging case, close the lid, and repeat the steps.

작동 지침

전원 켜기/끄기

  • 전원 켜기: 충전 케이스에서 이어버드를 꺼내세요. 전원이 자동으로 켜집니다.
  • 전원 끄기 : 이어버드를 충전 케이스에 다시 넣고 뚜껑을 닫으세요. 이어버드가 자동으로 전원이 꺼지고 충전이 시작됩니다.

다기능 버튼 컨트롤

Each earbud features a multifunction button for various controls. Refer to the image below for button location.

Cellet Wireless Bluetooth Earbuds XG01 with LED power indicators and multifunction buttons

Image: The open charging case displaying the left and right earbuds, highlighting the multifunction buttons and LED power indicators on both the earbuds and the charging case.

  • 음악 재생/일시 중지: Single press the multifunction button on either earbud.
  • 전화 받기/종료: Single press the multifunction button on either earbud during an incoming call or active call.
  • 전화 거부: Press and hold the multifunction button on either earbud during an incoming call.
  • Voice Assistant 활성화 : (Specific action not detailed in source, typically a long press or double tap) Refer to your device's manual for voice assistant activation with Bluetooth devices.

음성 알림

The earbuds provide voice notifications for incoming calls, battery level status, and when they are successfully paired with your device.

Cellet Wireless Bluetooth Earbuds XG01 in various usage scenarios

Image: Depicts individuals using the earbuds in different settings, including while driving, cycling, and relaxing, demonstrating their versatility for communication and entertainment.

유지

청소

  • 부드럽고 마른 보푸라기 없는 천으로 이어버드와 충전 케이스를 정기적으로 청소하세요.
  • 연마성 세척제, 용제 또는 에어로졸 스프레이를 사용하지 마십시오.
  • 이어폰과 케이스의 충전 접점이 깨끗하고 이물질이 없는지 확인하세요.

저장

  • 사용하지 않을 때는 이어버드를 충전 케이스에 보관하여 보호하고 충전 상태를 유지하세요.
  • 극한의 온도와 직사광선을 피해 서늘하고 건조한 곳에 보관하세요.

문제 해결

일반적인 문제 및 솔루션

  • 이어버드 전원이 켜지지 않음:

    Ensure the earbuds are fully charged. Place them in the charging case and check the charging indicators.

  • 이어폰이 기기와 페어링되지 않음:

    Make sure Bluetooth is enabled on your device. Forget "Cellet_EB600" from your device's Bluetooth list and attempt to pair again following the "Pairing with Your Device" steps.

    Ensure earbuds are removed from the charging case and are in pairing mode (indicated by voice prompt).

  • 이어버드가 하나만 작동합니다:

    Place both earbuds back into the charging case, close the lid, then remove them simultaneously to allow them to re-sync with each other.

    Check battery level for both earbuds.

  • 음질이 좋지 않거나 연결이 끊김:

    Ensure your device is within the Bluetooth range (approximately 10 meters/33 feet) and there are no significant obstacles.

    다른 무선 장치의 간섭을 확인하십시오.

    Clean the ear tips and earbud speakers to remove any debris.

명세서

특징세부 사항
모델명XG01
블루투스 버전V5.0
연결 기술무선(블루투스)
귀 위치귀에
제어 유형미디어 컨트롤, 터치
마이크로폰Included (Dual Microphones)
소음 제어소음 차단
주파수 응답48000 kHz (XNUMX kHz)
Earbuds Battery Life (Music)3-4시간
Earbuds Battery Life (Talk Time)3-4시간
충전 케이스 배터리300mAh
충전 시간(케이스)약 1.5시간
대기 시간150시간
무선 범위10M
방수 수준IPX5
재료알루미늄, 플라스틱, 스테인리스 스틸
제품 치수1 x 1 x 1 인치
품목 무게4 온스
Cellet Wireless Bluetooth Earbuds XG01 compatibility with various devices

Image: Illustrates the broad compatibility of the earbuds with various devices, including iPhones, Samsung Galaxy phones, LG phones, Google Pixel phones, iPods, iPads, and other tablets and smartphones.

보증 및 지원

Cellet products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or further assistance, please contact Cellet customer service through their official web제품을 구매한 사이트 또는 소매업체.

Note: Specific warranty terms and conditions may vary by region. Please refer to the warranty card included in your package or visit the official Cellet web자세한 내용은 사이트를 참조하세요.

© 2026 Cellet. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.