소개
This manual provides essential information for the safe and efficient operation of your Faber Touchless Automatic Sanitizer Dispenser. Please read these instructions carefully before installation and use, and retain them for future reference. This dispenser is designed for use with alcohol-based liquid sanitizers only.
패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- Faber Touchless Automatic Sanitizer Dispenser
- 1.5 Meter Power Cord (3-pin)
- 사용 설명서 (본 문서)
- 보증 카드
- Screw Bag for Wall Mounting
제품 끝view
그림 1: 앞쪽 view of the Faber Touchless Automatic Sanitizer Dispenser.
그림 2: Dispenser dimensions: 30 cm height, 10 cm width, 13 cm depth.
그림 3: The dispenser features smart sensor technology for touchless operation, activating when a hand is placed beneath it.
그림 4: Key features include a durable stainless steel body, automatic dispensing mechanism, 1-liter capacity, and wall-mount design.
그림 5: The dispenser is constructed from high-quality Stainless Steel (SS 430) for durability and hygiene.
그림 6: 뒤쪽 view illustrating the designated points for secure wall mounting.
그림 7: This product is manufactured in India.
명세서
| 특징 | 사양 |
|---|---|
| 모델 번호 | AUTOMATIC SANITIZER DISPENSER 1L SS |
| 제조업체 부품 번호 | 131.0630.297 |
| 재료 | 스테인레스 스틸(SS 430) |
| 색상 | 스테인리스 스틸 |
| 제품 크기(L x W x H) | 31L x 13.4W x 10.3H 센티미터 |
| 액체 부피 용량 | 1리터 |
| 운영 볼륨tage | 교류 230V |
| 전원 코드 길이 | 1.5 미터 |
| 설치 유형 | 벽걸이형 |
| 품목 무게 | 1000그램 |
설정 및 설치
- 위치를 선택하십시오 : Select a suitable wall location for mounting, ensuring it is within reach of a power outlet.
- 설치: Use the provided screw bag to securely mount the dispenser to the wall. Refer to Figure 6 for mounting points on the back of the unit.
- 디스펜서 채우기: Open the top cover of the dispenser. Carefully pour alcohol-based liquid sanitizer only into the reservoir. Do not overfill. Close the cover securely.
- 전원 연결: Plug the 1.5-meter power cord into a standard AC 230V power outlet. The dispenser is designed for 'Plug & Play' operation.
- 초기 테스트: Place your hand under the sensor to ensure the dispenser is powered on and dispenses sanitizer correctly.
작동 지침
The Faber Touchless Automatic Sanitizer Dispenser utilizes smart sensor technology for hygienic operation.
- Ensure the dispenser is filled with alcohol-based liquid sanitizer and connected to a power source.
- Place your hand flat and directly under the dispensing nozzle, within the sensor's detection range (refer to Figure 3).
- The sensor will detect your hand and automatically dispense a measured amount of sanitizer.
- Remove your hand once sanitizer is dispensed.
Important: This dispenser is designed for liquid sanitizer. Do not use gel sanitizers, soaps, or other viscous liquids, as this may cause malfunction.
유지
- 청소: Wipe the exterior stainless steel body with a soft, damp 천으로 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 리필: When the sanitizer level is low, refill the reservoir with alcohol-based liquid sanitizer as described in the Setup section.
- 센서 관리: 센서가 제대로 작동하도록 센서 주변을 깨끗하고 방해물이 없는 상태로 유지하세요.
- 저장: If storing the dispenser for an extended period, empty the reservoir and clean the unit thoroughly. Disconnect from power.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Dispenser does not activate | No power; Sensor obstructed; Sanitizer level too low | Check power cord connection; Ensure sensor is clean and clear; Refill sanitizer reservoir. |
| Sanitizer flows continuously | Sensor continuously triggered; Internal blockage | Ensure no objects are near the sensor; Clean the sensor area; If problem persists, contact customer support. |
| Sanitizer is not dispensed, but power is on | Reservoir empty; Wrong type of liquid; Dispensing nozzle blocked | Refill with alcohol-based liquid sanitizer; Ensure only liquid sanitizer is used; Check and clear any blockage in the nozzle. |
| Dispensing amount is too small/large | Sensor sensitivity issue (not user adjustable) | Ensure hand is placed consistently under the sensor; If issue persists, contact customer support. |
보증 및 지원
This Faber Touchless Automatic Sanitizer Dispenser comes with a 1년 종합 보증 제품에 대해서는 구매일로부터 보증이 적용됩니다.
For warranty claims, technical assistance, or any product-related inquiries, please contact Faber Customer Support:
Customer Service Helpline: 1800-209-3484
Please have your model number (AUTOMATIC SANITIZER DISPENSER 1L SS) and proof of purchase ready when contacting support.