AQQA Aquarium Electric Power Sponge Filter Instruction Manual

소개

The AQQA Electric Power Sponge Filter is designed to provide efficient physical and biochemical filtration for both saltwater and freshwater aquariums. This submersible filter features a powerful, quiet motor and a dual-stage filtration system to maintain optimal water quality and increase oxygen content. This manual provides detailed instructions for setup, operation, and maintenance to ensure the best performance of your filter.

제품 특징

• Upgrade Electric Power Filter: Features a powerful motor, eliminating the need for an external air pump. Operates efficiently with low energy consumption and a noise level below 30dB for a quiet environment.
• 이중 여과 시스템: Combines physical filtration (biochemical cotton with ribbing design for increased surface area) and biochemical filtration (bio ceramic media balls for improved water purification and beneficial bacteria cultivation).
• Adjustable Water Outlet: The water outlet can be adjusted 360° and is retractable to adapt to various tank depths. It can be submerged or positioned above the water surface to purify water, increase circulation, and enhance oxygen content.
• 포괄적인 액세서리: Includes 4 sponges (2 spare), 1 bag of bio ceramic media balls, and 2 strong suction cups for secure installation. The filter box can accommodate additional or alternative filter media.
• 다양한 용도: Suitable for both saltwater and freshwater aquarium environments.

패키지 내용

설치를 진행하기 전에 모든 구성품이 있는지 확인하십시오.

• 1 x AQQA Electric Power Sponge Filter Unit (with motor)
• 4 x Biochemical Filter Sponges (2 pre-installed, 2 spare)
• 1 x Bag of Bio Ceramic Media Balls
• 2 x 흡입 컵
• 1 x Retractable Water Outlet Pipe

설치 지침

Follow these steps to correctly set up your AQQA Electric Power Sponge Filter:

1. 포장 풀고 검사하기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 손상 여부를 확인하세요.
2. Assemble Filter Components: Attach the biochemical sponges to the filter base. Ensure the motor unit is securely placed. The filter is designed for easy assembly and disassembly.
3. 필터 미디어 추가: Place the bio ceramic media balls into the designated filter box compartments. Ensure any spare sponges are removed from the filter box before use.
4. Attach Water Outlet: Connect the retractable water outlet pipe to the motor unit. Adjust its height and direction as needed for your aquarium setup.
5. Install in Aquarium: Use the provided suction cups to securely attach the filter to the inside wall of your aquarium. Ensure the filter is fully submerged in water.
6. 필터 프라이밍: Before plugging in, ensure the filter is completely immersed in water. Gently squeeze the sponges repeatedly until they are full of water and sink to the bottom of the fish tank. This removes trapped air and ensures proper operation.
7. 전원에 연결: Plug the filter into a suitable power outlet. The filter will begin operating, providing oxygenation and filtration.

작동 지침

Once installed and powered on, the AQQA Electric Power Sponge Filter will begin its operation:

1. 연속 여과: The powerful motor will draw water through the biochemical sponges for physical filtration, removing debris and residues.
2. Biological Processing: Water then passes through the bio ceramic media balls, where beneficial bacteria cultivate to purify water quality and decompose harmful substances.
3. 산소화: The filter's operation increases water circulation and oxygen content in the aquarium, crucial for fish health.
4. 물 흐름 조정: The 360° adjustable water outlet allows you to direct the flow as desired, minimizing surface disturbance or maximizing aeration.

유지

Regular maintenance ensures the longevity and efficiency of your AQQA Electric Power Sponge Filter:

1. Sponge Cleaning: Periodically remove the biochemical sponges and gently clean them with water from the fish tank. Avoid using tap water directly as it may contain chlorine that harms beneficial bacteria.
2. Media Ball Cleaning: The bio ceramic media balls should also be rinsed gently with aquarium water during sponge cleaning. Note that new media balls may have a layer of protective powder, which is normal and should be rinsed off before first use.
3. 모터 검사: Occasionally inspect the motor and impeller for any debris or blockages. Clean as necessary to maintain optimal flow.
4. 대사: The filter comes with 2 spare sponges. Replace sponges when they show significant wear or clogging that cannot be cleaned.

문제 해결

If you encounter any issues with your AQQA Electric Power Sponge Filter, please refer to the following common solutions:

• 유량 감소: Check if the sponges are clogged and require cleaning. Inspect the motor and impeller for any blockages. Ensure the water outlet is not obstructed.
• 과도한 소음: Ensure the filter is fully submerged and securely attached to the tank wall. Check for any trapped air within the unit; re-prime if necessary. Inspect the impeller for damage or debris.
• 필터가 시작되지 않음: Verify that the power cord is securely plugged into a working outlet. Ensure the motor is properly assembled and free of obstructions.
• 흐린 물: This may indicate insufficient filtration or an imbalance in the aquarium's biological cycle. Perform regular water changes and ensure filter media is clean and functioning correctly.

명세서

보증 및 지원

AQQA is committed to providing quality products and customer satisfaction.

• 보증: 이 제품은 구매일로부터 1년 보증이 제공됩니다.
• 고객 지원: For any questions, concerns, or technical assistance, please feel free to contact AQQA customer service.