Sonew 7 Channel GSM Remote Switch Controller 4G SMS Relay Switch User Manual

1. 서론

The Sonew 7 Channel GSM Remote Switch Controller (Model: Sonewa4re30d9sh-12) is a 4G remote control switch designed to operate via the 4G mobile phone network. This device features seven independent relay switches, allowing remote activation of connected equipment. It supports control through dialing its cell phone number or by sending SMS text commands.

The controller identifies authorized phone numbers, rejecting calls from unauthorized numbers without incurring call charges. Its 4G, 3G, and GSM compatibility ensures functionality across various regions. Programming can be performed quickly via SMS or the on-board quick teaching button. All relay outputs can function in either switch mode or pulse timing mode, supporting both free control and security authorization number control modes. The device also allows disabling SMS replies to save costs and provides a history log for equipment operation. It offers two output modes: relay output with call mode and relay output with SMS control.

Image 1.1: The Sonew 7 Channel GSM Remote Switch Controller with its protective cover removed, showing the internal circuit board, SIM card slot, antenna, and seven blue relay switches.

2. 설정

2.1 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 4G/3G/GSM 7방향 원격 스위치 컨트롤러 1개
• 1 x USB 케이블
• 1 x USB Programming Adapter
• 1 x 안테나
• 1 x 사용자 매뉴얼(이 문서)

Image 2.1: The Sonew controller alongside its accessories, including the USB cable, programming adapter, and antenna.

2.2 SIM 카드 설치

1. Open the controller's casing를 조심스럽게.
2. 회로 기판에서 SIM 카드 슬롯을 찾으십시오.
3. Insert a standard 4G/3G/GSM SIM card into the slot, ensuring correct orientation.
4. C를 닫으세요asing 안전하게.

이미지 2.2: 상세 view of the circuit board, highlighting the SIM card slot and the connector for the external antenna.

2.3 안테나 연결

Connect the provided antenna to the designated connector on the controller's circuit board. Ensure it is finger-tight to maintain a stable signal connection.

2.4 전원 연결

Connect the device to a 12-24V DC power source. Observe polarity to prevent damage. The power input terminals are typically labeled on the device.

2.5 릴레이 연결

Connect the devices you wish to control to the seven independent relay terminals. Refer to the wiring diagram (if provided separately or on the device itself) for correct connections. Each relay can be configured for normally open (NO) or normally closed (NC) operation depending on your application.

2.6 초기 프로그래밍

The controller can be programmed using SMS commands or PC software via the USB programming adapter. For initial setup, it is recommended to use the PC software for comprehensive configuration, including setting authorized phone numbers and default relay states.

• SMS Programming: Send specific SMS commands to the controller's SIM card number to configure settings. Refer to the command list in this manual or the full manual for details.
• PC 소프트웨어 프로그래밍: Connect the controller to a computer using the USB cable and programming adapter. Use the dedicated software to access and modify all settings.

3. 사용 설명서

3.1 Activating Relays via Phone Call

To activate Relay No. 1, dial the phone number of the SIM card inserted in the controller from an authorized phone number. The controller will reject the call and activate the relay without answering, thus incurring no call charges. This method is typically for Relay No. 1 only.

3.2 Controlling Relays via SMS Commands

All seven relays can be controlled using specific SMS commands. These commands allow you to switch relays ON/OFF, set pulse timing, and change operational modes.

• 스위치 모드: Relays remain in their activated state until another command is received.
• Pulse Timing Mode: Relays activate for a predefined duration and then automatically switch off.
• Example Command (Illustrative): To turn on Relay 2, you might send an SMS like "RELAY2ON" (actual commands will be specified in the full manual or software).

3.3 비밀번호 관리

The device supports remote password operations and password changes via SMS or PC software to enhance security. Ensure your password is kept confidential.

3.4 SMS Reply Function

The SMS reply function can be disabled to reduce operational costs. This setting can be configured through SMS commands or the PC software.

3.5 Equipment Operation History Log

The controller maintains a history log of operations. This log can be accessed and reviewed via PC software to monitor device activity.

Image 3.1: The Sonew controller in a typical application, demonstrating its capability to remotely control devices such as a garage door.

4. 유지관리

The Sonew 7 Channel GSM Remote Switch Controller is designed for low maintenance.

• 청소: 기기를 깨끗하게 유지하고 먼지가 쌓이지 않도록 하십시오. 부드럽고 마른 천으로 닦으십시오. 액체 세척제나 용제를 사용하지 마십시오.
• 환경 조건: Ensure the device is operated within its specified temperature and humidity ranges. Avoid exposure to extreme conditions, direct sunlight, or moisture.
• 연결 확인: Periodically check all wiring connections (power, relays, antenna) to ensure they are secure and free from corrosion.
• 펌웨어 업데이트: 제조사 확인해보세요 web성능 향상이나 기능 추가를 위한 펌웨어 업데이트가 있는지 정기적으로 사이트를 확인하십시오.

5. 문제 해결

5.1 장치가 응답하지 않음

• 전원 확인: Ensure the device is properly connected to a 12-24V DC power source and receiving power.
• SIM 카드: Verify that the SIM card is correctly inserted and active. Check if the SIM card has sufficient credit or an active plan for calls/SMS.
• 네트워크 신호: Ensure the device is in an area with adequate 4G/3G/GSM network coverage. The antenna should be securely connected.
• Authorized Numbers: Confirm that the phone number you are using to control the device is registered as an authorized number in the controller's settings.
• 프로그램 작성: Re-check your programming settings via SMS or PC software to ensure commands are correctly configured.

5.2 Relays Not Activating

• 배선: Inspect the wiring connections to the relays and the connected equipment. Ensure they are secure and correctly wired (NO/NC).
• 명령 구문: Double-check the SMS command syntax. Even minor errors can prevent commands from being recognized.
• Power to Controlled Device: Ensure the device connected to the relay has its own power supply, if required.
• 릴레이 모드: Verify if the relay is set to the correct mode (switch or pulse timing) for your application.

5.3 Incorrect Frequency Band (US vs. European/Australian)

The device is available in different frequency versions (US, European, Australian). If the device is not functioning, ensure you have the correct version for your region's mobile network frequencies. Using a device designed for a different region will result in network connectivity issues.

6. 사양

7. 보증 정보

Specific warranty details for the Sonew 7 Channel GSM Remote Switch Controller are not available in the provided product data. Please refer to the product packaging, the manufacturer's official website, or contact your point of purchase for comprehensive warranty information.

8. 지원

For technical assistance, further inquiries, or to download the latest software and firmware, please visit the official Sonew web사이트를 방문하거나 고객 지원팀에 문의하세요.

제조업체: 소뉴
Web대지: 아마존에서 Sonew 스토어를 방문하세요. (for general brand information, specific support links may vary)