1. 중요 안전 지침
Read all instructions carefully before installing or operating this appliance. Keep this manual for future reference. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons.
- 전원 공급 장치가 볼륨과 일치하는지 확인하십시오.tag등급 라벨에 지정되어 있습니다.
- 설치는 모든 지역 규정 및 표준에 따라 자격을 갖춘 기술자가 수행해야 합니다.
- Do not operate the chimney if the power cord or plug is damaged.
- Never leave cooking food unattended, especially when using high heat.
- 기름때가 쌓여 화재 위험을 초래하는 것을 방지하기 위해 기름 필터를 정기적으로 청소하십시오.
- This appliance is for domestic use only. Do not use it for purposes other than its intended use.
2. 제품 오버view
The Faber Hood STILUX 3D PLUS MAX T2S2 BK TC 90 is a 90 cm box-type kitchen chimney designed for efficient smoke and odor extraction. It features a sleek black finish, touch controls, and durable baffle filters suitable for Indian cooking conditions.
Image 1: Faber Hood STILUX 3D PLUS MAX T2S2 BK TC 90 Kitchen Chimney
3. 설정 및 설치
Professional installation is highly recommended for this wall-mounted chimney. Ensure the installation area meets the following requirements:
- 벽면 장착: The chimney is designed for wall mounting above a cooking range. The wall must be strong enough to support the appliance's weight (approximately 12 kg).
- 덕트: Proper ducting is essential for effective ventilation. Ensure the duct pipe is of appropriate diameter and length, with minimal bends, to maximize suction efficiency.
- 전원 공급 장치: A dedicated 220V power outlet should be available near the installation point.
- 정리: Maintain adequate clearance between the cooking surface and the bottom of the chimney as per local safety regulations and manufacturer guidelines.
Image 2: General view of the Faber Chimney, illustrating its design for wall mounting.
4. 사용 설명서
The chimney features an intuitive touch control panel for easy operation.
Image 3: Touch Control Panel for the Faber Chimney
4.1 전원 켜기/끄기
를 누르세요 힘 button (usually indicated by a circle with a vertical line) on the touch panel to turn the chimney on or off.
4.2 Adjusting Suction Speed
The chimney offers 3 suction speeds. Use the 속도 +/- buttons to select the desired level of extraction. Higher speeds are recommended for heavy frying or grilling.
4.3 Operating the LED Lights
를 누르세요 빛 button (usually indicated by a light bulb icon) to turn the integrated LED lights on or off, illuminating your cooking area.
5. 유지관리
Regular maintenance ensures optimal performance and longevity of your chimney.
5.1 Baffle Filter Cleaning
The 3 baffle filters are designed to effectively separate grease from cooking fumes. For best performance, clean the baffle filters every 6 months, or more frequently depending on usage.
- 제거: Carefully unlatch and remove the baffle filters from the chimney.
- 청소: Soak the filters in hot water with a degreasing agent or dish soap. Scrub gently with a non-abrasive brush to remove grease buildup. Alternatively, some baffle filters are dishwasher safe (consult specific product details).
- Drying & Reinstallation: Ensure filters are completely dry before reinstalling them.
Image 4: Close-up of a Baffle Filter
5.2. 외부 청소
Wipe the exterior surfaces of the chimney with a soft cloth and mild detergent. Avoid abrasive cleaners or scouring pads that can damage the black finish.
6. 문제 해결
일반적인 문제와 잠재적인 해결책은 아래 표를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 굴뚝이 작동하지 않습니다 | No power supply; loose connection; faulty switch | Check power plug and circuit breaker; ensure connections are secure; contact service if switch is faulty. |
| 흡입력이 약함 | Clogged filters; obstructed ducting; incorrect speed setting | Clean baffle filters; check ducting for blockages; select a higher speed setting. |
| 과도한 소음 | Loose components; motor issue; improper installation | Check for loose screws or parts; ensure proper installation; contact service for motor inspection. |
| 조명이 작동하지 않습니다 | LED 불량amp; wiring issue | Check light button operation; contact service for lamp replacement or wiring inspection. |
7. 사양
Detailed technical specifications for the Faber Hood STILUX 3D PLUS MAX T2S2 BK TC 90 chimney.
| 특징 | 사양 |
|---|---|
| 상표 | 페이버 |
| 모델 번호 | Hood STILUX 3D PLUS MAX T2S2 BK TC 90 |
| 제품 크기(D x W x H) | 51D x 90W x 90H 센티미터 |
| 색상 | 검은색 |
| 마무리 유형 | 블랙 마감 |
| 기류 용량 | 시간당 1350 세제곱미터 |
| 소음 수준 | 58데시벨 |
| 장착 유형 | 벽걸이형 |
| 컨트롤 타입 | 터치 컨트롤 |
| 권tage | 220 볼트 |
| 속도의 수 | 3 |
| 광원 | LED (2x1.1 watts) |
| 필터 유형 | Baffle (3 filters) |
| 환기 유형 | 덕트/환기식 |
| 품목 무게 | 12000그램 |
| 재료 유형 | 합금강 |
| 포함된 구성 요소 | 1 Chimney, 1 User Manual |
8. 보증 및 지원
Faber provides comprehensive warranty coverage and customer support for your product.
- 제품 보증: 1 year on the product from the date of purchase.
- 모터 보증: 구매일로부터 10년 동안 모터에 대한 보증이 제공됩니다.
- 고객 지원: For any service requests, technical assistance, or warranty claims, please contact Faber customer care.
Faber Customer Care: 1800 209 3484