AZZA CSAZ-440

AZZA CSAZ-440 Eclipse ATX Mid Tower Gaming Case User Manual

설치, 작동 및 유지관리에 대한 가이드입니다.

1. 서론

The AZZA CSAZ-440 Eclipse is a mid-tower gaming case designed for optimal airflow and component compatibility. It features a sleek aesthetic with a focus on performance, offering ample space for high-end hardware and efficient cooling solutions. This manual provides essential information for assembling, operating, and maintaining your new PC case.

2. 특징

  • 마더보드 호환성: Supports ATX and E-ATX motherboards.
  • 드라이브 베이 :
    • 2 x 2.5" SSD mounts (behind motherboard tray).
    • 2 x 2.5"/3.5" HDD/SSD mounts (in removable drive cage).
  • CPU 쿨러 정리: 높이는 최대 160mm입니다.
  • GPU 길이 여유: 길이는 최대 390mm입니다.
  • PCIe 슬롯: 7 re-attachable expansion slots.
  • 팬 지원:
    • Front: 3 x 120mm or 3 x 140mm.
    • Top: 3 x 120mm or 2 x 140mm.
    • Rear: 1 x 120mm.
    • PSU Shroud: 2 x 120mm.
  • 라디에이터 지원 :
    • Front: Up to 360mm.
    • 상단: 최대 240mm.
    • 후면: 최대 120mm.
  • 포함된 팬: 1 x 120mm ARGB fan (pre-installed at the rear).
  • ARGB 제어: Integrated ARGB controller for lighting customization.
  • 사이드 패널 : 부품 확인을 위한 강화 유리.
  • 먼지 필터: Magnetic dust filter on top, slide-out dust filter at the bottom.
  • 케이블 관리 : Features rubber grommets for clean cable routing.
  • 빌드 품질: Enhanced metal construction for increased durability and stability.

3. 설정

Before beginning assembly, ensure you have all necessary components and tools. The case is designed for straightforward installation, but careful attention to detail will ensure optimal performance.

3.1 언박싱 및 초기 검사

Carefully remove the case from its packaging. Inspect for any signs of damage during transit. Remove all protective films and internal packaging materials.

AZZA CSAZ-440 Eclipse case being unboxed, showing the protective plastic and foam packaging.

The AZZA CSAZ-440 Eclipse case is securely packaged with protective plastic and foam to prevent damage during shipping.

3.2 구성 요소 설치

  1. 마더보드: Install your ATX or E-ATX motherboard onto the standoffs. Ensure all screws are tightened securely.
  2. 저장 드라이브:
    • For 2.5" SSDs, mount them directly behind the motherboard tray using the provided brackets.
    • For 2.5"/3.5" drives, utilize the removable drive cage located behind the PSU shroud. Slide out the trays, secure your drives, and reinsert the cage.
내부 view of the AZZA CSAZ-440 Eclipse case, showing the motherboard tray and drive mounting points.

The spacious interior of the AZZA CSAZ-440 Eclipse provides ample room for component installation, including multiple drive mounting options.

Close-up of the removable hard drive cage at the bottom of the case.

The removable hard drive cage simplifies the installation of 2.5-inch and 3.5-inch storage drives.

  1. 전원 공급 장치: Install your power supply unit into the dedicated shroud at the bottom of the case.
  2. 그래픽 카드(GPU): Insert your graphics card into the appropriate PCIe slot. The case supports GPUs up to 390mm in length. Utilize the re-attachable PCIe brackets for secure mounting.
  3. 냉각 팬/라디에이터: Install additional fans or radiators as desired in the front, top, or rear positions. The case supports various sizes for flexible cooling configurations.
  4. 케이블 관리 : Route all necessary cables through the rubber grommets and tie-down points behind the motherboard tray to ensure clean aesthetics and optimal airflow.

4. 운영

Once all components are installed and connected, you can power on your system. The case features convenient front I/O ports and an integrated RGB controller for easy operation.

4.1 전면 I/O 포트

  • USB 포트: The front panel includes 1 x USB 3.0 port and 2 x USB 2.0 ports for peripheral connectivity.
  • 오디오 잭: Separate headphone and microphone jacks are provided.
  • Power/Reset Buttons: Standard power and reset buttons are located on the front I/O.

4.2 RGB 조명 제어

The included 120mm ARGB fan and integrated ARGB controller allow for customizable lighting effects. Use the dedicated LED button on the front I/O to cycle through various lighting modes and colors. For advanced synchronization, connect the ARGB controller to your motherboard's compatible ARGB header and use motherboard software.

5. 유지관리

Regular maintenance helps ensure optimal performance and longevity of your PC components. The AZZA CSAZ-440 Eclipse is designed with easy-to-clean dust filters.

5.1 먼지 필터 청소

  • 상단 필터: The magnetic dust filter on the top panel can be easily removed for cleaning.
  • 하단 필터: The slide-out dust filter located at the bottom of the case (under the PSU) can be pulled out for convenient cleaning.

Clean dust filters regularly to prevent dust buildup, which can restrict airflow and negatively impact cooling performance.

6. 문제 해결

이 섹션에서는 PC 케이스 사용 시 발생할 수 있는 일반적인 문제에 대해 설명합니다.

6.1 일반적인 성능 문제

  • 공기 흐름 불량/고온: Ensure all fans are correctly installed and spinning. Check and clean all dust filters. Verify that cables are neatly routed to avoid obstructing airflow. The mesh front panel is designed for excellent airflow.
  • 느슨한 연결: If components are not functioning, check all power and data connections to ensure they are securely seated.

7. 사양

특징세부 사항
상표아자
모델명CSAZ-440 ECLIPSE
케이스 유형미드 타워
마더보드 호환성ATX, E-ATX
색상검은색
재료합금강
품목 무게6.3 킬로그램
포함된 팬1 x 120mm ARGB Fan (Rear)
전면 I / O 포트1 x USB 3.0, 2 x USB 2.0, HD Audio, Mic, LED Button, Power, Reset
GPU 길이 여유 공간최대 390mm
CPU 쿨러 높이 여유 공간최대 160mm

8. 보증 및 지원

The AZZA CSAZ-440 Eclipse ATX Mid Tower Gaming Case comes with a 1-year limited warranty from the manufacturer. For technical support, troubleshooting assistance, or warranty claims, please contact AZZA customer service through their official web사이트 또는 공인 판매점.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.