Youmile DC 6-30V Programmable Timer Delay Relay Module User Manual

소개

The Youmile DC 6-30V Programmable Timer Delay Relay Module is a versatile control unit designed for precise timing applications. It operates within a wide voltage range of DC 6V to 30V and can also be powered via a Micro USB 5V input. Featuring a clear LED display, this module allows users to configure various timing parameters such as conduction time (OP), stop time (CL), and loop operation times (LOP). All settings are saved permanently, ensuring consistent performance. This module is suitable for a wide array of applications including smart home automation, industrial control systems, automatic irrigation, and protective equipment.

Figure 1: Youmile Timer Delay Relay Module. 이 이미지는 상단을 보여줍니다 view of the module, highlighting the digital LED display, the four control buttons (SET, STOP, UP, DOWN), and the relay component.

1. 설정 및 배선

Before connecting the module, ensure your power source and load meet the specified requirements. The module supports a DC input voltage range of 6V to 30V. Alternatively, it can be powered via a 5V Micro USB connection.

• 전원 공급 장치: Connect DC 6V-30V to the input terminals or use a Micro USB 5V power supply.
• 방아쇠 신호: The high-level trigger input accepts 3V-24V. The module includes a built-in diode for reverse polarity protection.
• 부하 연결: The relay's normally open (NO) contact can handle a maximum load of AC 250V/10A or DC 30V/10A.

Figure 2: Wiring Diagram - Weak Current Controlling Strong Current. This diagram illustrates how to connect the module when a low-power trigger signal controls a higher-power load. The DC 6-30V input powers the module, and the trigger signal (3V-24V) activates the relay. The load is connected to the NO (Normally Open) and COM (Common) terminals of the relay, with the AC or DC power source for the load connected separately.

Figure 3: Wiring Diagram - Sharing One Power Supply. This diagram shows a configuration where the module and the load share a common power supply (DC 6-30V). The trigger signal (3V-24V) activates the relay, and the load is connected to the NO and COM terminals, drawing power from the same source as the module.

2. 사용 설명서

The module features a digital tube time display and four control buttons: 세트, 멈추다, UP, 그리고 아래에.

2.1. Display and Auto-Off Feature

The digital display shows current settings or countdowns. If no operation is performed within 5 minutes, the digital display will automatically turn off to save power. Press any button to reactivate the display.

2.2. Parameter Setting Modes

The module supports various operating modes, each defined by specific parameters: OP (conduction time), CL (stop time), and LOP (loop times). These parameters can be set individually and are permanently stored even after power loss.

1. 설정 모드로 진입: 를 누르고 계세요 세트 button for a few seconds until the display shows "P-X" (where X is the mode number).
2. 모드 선택: 사용하세요 UP 그리고 아래에 buttons to cycle through the available operating modes (e.g., P-1.1, P-1.2, P-2, P-3.1, P-3.2, P-4). Refer to the detailed mode descriptions for specific functionalities.
3. Setting Parameters (OP, CL, LOP): Once a mode is selected, briefly press 세트. The display will flash the first parameter (e.g., OP). Use UP 그리고 아래에 to adjust the value. Briefly press 세트 again to move to the next parameter (e.g., CL, then LOP).
4. Adjusting Time Units: While a parameter (OP, CL) is flashing, press the 멈추다 button to switch between time units: "xxx." (seconds, 0.1s to 999s), "xx.x" (minutes, 0.1min to 99.9min), or "x.x.x" (hours, 0.1h to 99.9h).
5. 설정 저장: After setting all parameters for the chosen mode, press and hold the 세트 button until the display stops flashing and returns to the main display. This saves all parameters permanently.

2.3. STOP Button Functionality

In the main display interface, a short press of the 멈추다 button can toggle the relay's enable/disable state. The display will show "ON" or "OFF" to indicate the current state. When "OFF", the relay will not conduct, even if triggered.

2.4. 일반적인 응용 프로그램

This module is widely used for:

• 스마트 홈 자동화
• 산업용 제어 시스템
• Automatic irrigation systems
• 환기 제어
• Protective equipment timing

3. 유지관리

The Youmile Timer Delay Relay Module is designed for durability and requires minimal maintenance. To ensure optimal performance and longevity:

• 깨끗하게 유지하십시오: Regularly clean the module with a soft, dry cloth to prevent dust accumulation, especially around the buttons and display.
• 습기를 피하세요: Protect the module from water, high humidity, and corrosive environments.
• 온도 범위: Operate the module within its specified temperature range of -20°C to 60°C.
• 보안 연결: 모든 배선 연결부를 주기적으로 점검하여 안전하고 부식되지 않았는지 확인하세요.
• 전원 공급 장치: 항상 지정된 볼륨 내에서 안정적인 전원 공급 장치를 사용하십시오.tage range (DC 6-30V or Micro USB 5V).

4. 문제 해결

If you encounter issues with your Youmile Timer Delay Relay Module, consider the following common troubleshooting steps:

• 모듈의 전원이 켜지지 않음:
  • 전원 공급 볼륨을 확인하세요tage is within DC 6-30V or 5V via Micro USB.
  • 전원 연결부의 극성이 올바른지, 접촉이 제대로 되었는지 확인하십시오.
  • Ensure the Micro USB cable is functional if using that power source.
• 릴레이가 작동하지 않음:
  • Check if the trigger signal voltage is within 3V-24V and connected correctly.
  • Ensure the module is not in "OFF" state (check with a short press of the STOP button).
  • Verify the timing parameters (OP, CL, LOP) are set correctly for the desired operation mode.
  • Confirm the load is connected to the correct relay terminals (NO/COM) and is within the maximum load specifications.
• Display Not Showing:
  • The display automatically turns off after 5 minutes of inactivity. Press any button to reactivate it.
  • If still off, check power supply as above.
• Parameters Not Saving:
  • 버튼을 길게 누르세요 세트 button after configuring parameters until the display stops flashing to save them.

5. 사양

Figure 4: Module Bottom View. This image displays the underside of the module, showing the circuit board layout and various pin labels for connections.

6. 보증 및 지원

For detailed support, additional resources, or warranty information, please refer to the official Youmile product documentation. A user manual is often available online. For this product, a user manual can be found at: https://bit.ly/2YrfL8a.

For further assistance, please contact Youmile customer support through their official channels.