First Alert Z-Wave Smoke & Carbon Monoxide Alarm

1. 서론

The First Alert Z-Wave Smoke & Carbon Monoxide Detector Alarm is a wireless, battery-powered device designed to enhance home safety by detecting both smoke and carbon monoxide. It offers improved compatibility with the Ring Alarm Security System and other certified Z-Wave systems, providing mobile alerts in emergency situations. This 2-in-1 alarm features a photoelectric smoke-sensing chamber, an electrochemical carbon monoxide sensor, an 85-decibel horn, a tamper-resistant battery door, and a single test/silence button. It is suitable for residential and institutional applications, including sleeping areas in hospitals, hotels, dorms, and multi-family dwellings, complying with various safety standards such as UL217, UL2034, and NFPA 101.

2. 안전 정보

Please read and understand all instructions before installing and operating this alarm. Failure to do so may result in property damage, injury, or death. This alarm is designed to detect smoke and carbon monoxide. It is not designed to detect fire, heat, or other gases. For optimal performance, ensure the alarm is installed according to these instructions and regularly maintained.

• 중요한: 경보기에 페인트를 칠하지 마십시오. 페인트는 감지 챔버를 막아 경보기가 제대로 작동하지 못하게 할 수 있습니다.
• 배터리 안전: Use only the specified batteries. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries properly.
• 규정 준수: This alarm complies with UL217, UL2034, CSFM, NFPA 720, NFPA 101, and other relevant standards.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• First Alert Z-Wave Smoke & Carbon Monoxide Alarm Unit
• 2 x AA 배터리(포함)
• 장착 브래킷
• 장착 나사 및 앵커

4. 설정

4.1 배터리 설치

The alarm requires two AA batteries for operation. Do not insert the batteries until prompted by your Z-Wave hub's setup process, especially if integrating with a Ring Alarm system.

Image: The alarm unit with its battery compartment open, revealing two AA batteries. The battery compartment is designed for easy access.

1. Locate the battery compartment on the side of the alarm unit.
2. 배터리 도어를 엽니다.
3. AA 배터리 2개를 올바른 극성(+/-)에 맞춰 삽입하세요.
4. Close the battery door securely. The alarm may chirp or beep to indicate it is powered on.

4.2 설치 위치

Proper placement of the alarm is crucial for effective detection. Install the alarm in all sleeping areas and on every level of your home, including the basement. For carbon monoxide detection, consider placing an alarm near potential sources of CO, such as attached garages or areas with fuel-burning appliances.

Image: A visual guide illustrating recommended locations for smoke and CO alarms (represented by icons) throughout different rooms and levels of a house, including bedrooms, living room, kitchen, hallway, basement, and garage.

1. Choose a location on a wall or ceiling, away from direct sunlight, vents, or areas with high humidity.
2. 제공된 장착 브래킷을 템플릿으로 사용하여 드릴 구멍을 표시합니다.
3. 필요한 경우 구멍을 뚫고 벽 고정 장치를 삽입합니다.
4. Secure the mounting bracket to the wall or ceiling with screws.
5. Attach the alarm unit to the mounting bracket by twisting it clockwise until it locks into place.

4.3 Z-Wave Pairing (Smart Start)

This alarm features Z-Wave Plus with Smart Start, allowing for faster and more intuitive connection to your compatible Z-Wave gateway hub. Ensure your hub supports this First Alert detector.

Image: The First Alert Z-Wave Smoke and CO Alarm unit, prominently displaying the Z-Wave Plus logo and a "Works with Ring" logo, indicating its compatibility with Z-Wave networks and Ring Alarm systems.

1. Open your Z-Wave gateway hub's mobile application or interface.
2. Initiate the "Add Device" or "Pair Device" process within your hub's settings.
3. Locate the QR code on the back of your First Alert alarm unit.
4. Use your hub's app to scan the QR code. The Smart Start feature will automatically begin the pairing process.
5. Follow any on-screen prompts from your hub's application to complete the setup.
6. Once successfully paired, you should receive real-time notifications in your app when smoke or carbon monoxide is detected.

5. 운영

5.1 테스트/음소거 버튼

The large button on the front of the alarm serves as both the Test and Silence button.

이미지: 명확한 view of the front of the First Alert Z-Wave Smoke and CO Alarm, highlighting the central "TEST/SILENCE" button and the indicator lights for CO, Smoke, and Power.

• 테스트하려면: Press and hold the Test/Silence button for a few seconds. The alarm will sound a test pattern (e.g., 3 beeps for smoke, 4 beeps for CO). This confirms the alarm's electronics, battery, and horn are working.
• 침묵에게: In the event of a nuisance alarm (e.g., from cooking smoke), press the Test/Silence button to temporarily silence the alarm. The alarm will automatically reset after a few minutes if the smoke or CO concentration has cleared.

5.2개의 표시등

The alarm features several indicator lights to communicate its status:

• 전원(녹색 LED): Flashes approximately once per minute to indicate normal operation.
• Smoke (Red LED): Flashes rapidly during a smoke alarm.
• CO (Red LED): Flashes rapidly during a carbon monoxide alarm.
• Trouble/Malfunction (Yellow LED): Indicates a fault or low battery. Refer to the troubleshooting section.

6. 유지관리

6.1 정기 테스트

Test your alarm weekly by pressing the Test/Silence button. This ensures the alarm is functioning correctly.

6.2 배터리 교체

The alarm will chirp periodically (e.g., once every minute) and the yellow LED will flash to indicate a low battery. Replace both AA batteries immediately when this occurs. Refer to Section 4.1 for battery installation steps.

6.3 청소

Clean your alarm at least once a month to remove dust and debris. Use a soft brush attachment on your vacuum cleaner to gently vacuum the alarm's cover and vents. Do not use cleaning solvents or sprays directly on the alarm.

7. 문제 해결

8. 사양

9. 보증 및 지원

This First Alert Z-Wave Smoke & Carbon Monoxide Alarm comes with a 7년 제한 보증. For detailed warranty information or technical support, please refer to the official First Alert website or contact their customer service. Ensure you retain your proof of purchase for warranty claims.