1. 중요한 안전 정보
Please read this entire manual carefully before installing and using your AREBOS Inflatable Hot Tub. Failure to follow these instructions could result in serious injury or property damage. Keep this manual for future reference.
- 전기 안전: Always connect the hot tub to a grounded power outlet. Do not use extension cords. Ensure all electrical connections are dry and protected from water.
- 물 화학: Maintain proper water chemistry (pH, sanitizer levels) to ensure safe and hygienic water conditions. Improper chemistry can lead to health issues and damage to the hot tub.
- 온도: The water temperature should not exceed 40°C (104°F). Pregnant women, young children, and individuals with health conditions should consult a physician before use.
- 감독: 어린이들은 온수 욕조 안이나 근처에 있을 때 항상 어른의 감독을 받아야 합니다.
- 놓기: Place the hot tub on a flat, stable, and level surface capable of supporting the weight of the filled hot tub and its occupants. Ensure adequate drainage.
2. 설정 및 설치
Follow these steps for proper setup of your AREBOS Inflatable Hot Tub.
- 짐 풀기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 포장 목록에 있는 모든 부품이 있는지 확인하세요.
- 사이트 선택: Choose a suitable location for your hot tub. The surface must be flat, stable, and free of sharp objects. Consider proximity to a power outlet and a water source.
- 자동 인플레이션: Connect the hot tub to a power source. The hot tub features an automatic inflation function. Simply press the inflation button on the control panel, and the spa will inflate itself. Ensure the air valve is securely closed after inflation.
- 물 채우기: Once inflated, fill the hot tub with water using a garden hose. Fill to the recommended water level indicated on the inner wall of the spa (between MIN and MAX lines).
- 필터 설치 : Install the filter cartridge into the designated filter housing inside the hot tub. Ensure it is securely fastened.
설치 데모 비디오
Video: This video demonstrates the automatic inflation process, filling the hot tub with water, and activating the massage jets. It provides a visual guide to the initial setup and basic operation of the AREBOS Inflatable Hot Tub.
3. 사용 설명서
Familiarize yourself with the control panel to operate your hot tub effectively.
- 전원 켜기/끄기: Press the power button to turn the hot tub system on or off.
- 온도 조절: Use the 'Temp Up' and 'Temp Down' buttons to set your desired water temperature, up to 40°C. The display will show the current water temperature.
- 히터 기능: Activate the heater by pressing the 'Heater' button. The heater will automatically turn off once the set temperature is reached and reactivate if the temperature drops.
- Massage Jets (Bubbles): Press the 'Bubble' button to activate the 130 powerful air jets for a relaxing massage experience. Press again to turn off.
- 필터 시스템: The 'Filter' button controls the filtration system. It is recommended to run the filter regularly to maintain water clarity. The system includes an alarm function for filter maintenance.
- Automatic Shut-off/Standby: The hot tub features automatic shut-off and standby modes for safety and energy efficiency.
4. 유지관리
정기적인 유지 관리는 온수 욕조의 수명과 위생적인 작동에 매우 중요합니다.
- 필터 카트리지 청소/교체: The high-performance filter with 80 slits should be cleaned regularly (e.g., weekly) and replaced every few months, depending on usage. A filter alarm will indicate when attention is needed.
- 물 처리: Regularly test the water pH and sanitizer levels (e.g., chlorine or bromine). Adjust as necessary using appropriate hot tub chemicals to prevent algae growth and ensure water quality.
- Cleaning the Hot Tub: Periodically drain the hot tub and clean the interior surfaces with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly before refilling.
- 커버 관리: Keep the hot tub cover clean and free of debris. This helps maintain water temperature and prevents contamination.
- 겨울철 대비 (실외 사용 시): If using outdoors in cold climates, follow proper winterization procedures to prevent freezing and damage to the hot tub and its components. This typically involves draining, cleaning, drying, and storing in a protected area.
5. 문제 해결
This section addresses common issues you might encounter with your AREBOS Inflatable Hot Tub.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Hot tub not inflating | Power not connected; air valve open; inflation button not pressed. | Ensure power is connected. Close air valve. Press the automatic inflation button. |
| 물이 가열되지 않음 | Heater not activated; filter dirty; ambient temperature too low; cover not on. | Activate heater. Clean or replace filter. Ensure hot tub is covered to retain heat. |
| Massage jets not working | Bubble function not activated; power issue. | Press the 'Bubble' button. Check power connection. |
| Filter alarm / Dirty water | Filter cartridge clogged; improper water chemistry. | Clean or replace the filter cartridge. Test and adjust water chemistry (pH, sanitizer). |
| 물이 새다 | Loose connections; small puncture. | Check all connections for tightness. Use the provided repair kit for small punctures. |
6. 사양
Key technical specifications for the AREBOS Inflatable Hot Tub, Model AR-HE-AB1700.
| 특징 | 사양 |
|---|---|
| 상표 | 아레보스 |
| 모델명 | AR-HE-AB1700 |
| 색상 | 검은색 |
| 재료 | 폴리염화비닐(PVC) |
| 제품 크기(L x W x H) | 2.08L x 2.08W x 0.68H meters |
| 품목 무게 | 25 킬로그램 |
| 물 용량 | 1000리터 |
| 좌석 수 | 6명 |
| 권tage | 240 볼트 |
| 제트기 수 | 130 |
| 전원 | 코드식 전기 |
| 모양 | 둥근 |
| 조립이 필요합니다 | No (Automatic Inflation) |
7. 보증 및 지원
For warranty claims or technical support, please refer to the following information:
- 보증: This product is covered by the manufacturer's standard warranty. Please retain your proof of purchase for any warranty claims. Specific warranty terms and duration may vary by region.
- 기술 지원: For assistance with setup, operation, troubleshooting, or parts, please contact AREBOS customer service. You can often find contact information on the manufacturer's official web해당 사이트를 통해서나 제품을 구매한 소매업체를 통해서도 구매가 가능합니다.
- 온라인 리소스: 방문하세요 아마존에서 AREBOS 스토어를 만나보세요 추가 제품 정보 및 지원은 여기를 참조하세요.