1. 서론
구매해주셔서 감사합니다asing the Fenge Electric Standing Desk ED-S48101WB. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new desk.
This electric standing desk is designed to promote a healthier work environment by allowing you to easily switch between sitting and standing positions. Regular changes in posture can improve blood circulation, metabolism, reduce back strain, and potentially increase productivity.
2. 안전 정보
- 조립 및 사용 전에 모든 지침을 주의 깊게 읽으십시오.
- 작동 중에는 어린이와 애완동물이 책상에 접근하지 못하도록 하세요.
- 책상은 평평한 곳에 두세요.
- 책상에 너무 많은 하중을 가하지 마십시오. 최대 하중은 80kg(176파운드)입니다.
- 높이를 조정할 때는 움직이는 부분에 손과 손가락이 닿지 않도록 주의하세요.
- 책상에 앉거나 서 있지 마십시오.
- 청소 또는 유지 보수 전에 전원을 차단하십시오.
- In case of malfunction, refer to the troubleshooting section or contact customer support.
3. 제품 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | ED-S48101WB |
| 탁상 치수 | 가로 110cm x 세로 60cm |
| 테이블탑 두께 | 16mm (XNUMXmm) |
| 높이 조절 범위 | 73.5cm - 123.5cm |
| 최대 하중 용량 | 80kg(176파운드) |
| 입력 Voltage | 100-240V |
| 소음 수준 | < 50dB (데시벨) |
| 프레임 소재 | 강철 |
| 테이블탑 소재 | Wood (Brown finish) |
| 특별 기능 | 4-position memory function, Anti-collision system, Reinforced stability pipe |
Image: Detailed dimensions of the Fenge Electric Standing Desk, including tabletop size (110cm x 60cm), height range (73.5cm to 123.5cm), and maximum load capacity (80kg / 176lbs).
4. 패키지 내용
조립을 시작하기 전에 모든 구성품이 있는지 확인하세요. 부품이 누락되었거나 손상된 경우 고객 지원 센터에 문의하세요.
- 테이블 상판 (2개 부분)
- 책상 프레임 (다리, 가로대)
- 디스플레이가 있는 제어판
- 전원 어댑터
- 케이블 연결
- 조립용 하드웨어(나사, 육각렌치)
- 사용 설명서
5. 설치 및 조립
Follow these steps to assemble your Fenge Electric Standing Desk. It is recommended to have two people for assembly.
- 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼낸 후 긁힘을 방지하기 위해 깨끗하고 부드러운 표면에 놓으세요.
- 책상 프레임 조립: Attach the legs to the crossbar. Ensure all screws are tightened securely.
- Attach Reinforced Pipe: Secure the reinforced pipe between the legs for enhanced stability. This pipe is positioned 57 cm from the floor, allowing amp다리 공간.
- Mount Control Box and Motor: Securely attach the control box and motor to the designated areas on the desk frame using the provided hardware.
- 케이블 연결: Connect the motor cable, control panel cable, and power adapter cable to the control box. Ensure all connections are firm.
- 테이블탑 부착: Place the two tabletop sections onto the assembled frame. Align the pre-drilled holes and secure the tabletop to the frame using the provided screws. Note: The tabletop consists of two panels, which will have a visible seam in the middle once assembled.
- 초기 전원 켜기: Plug the power adapter into a wall outlet. The control panel display should light up.
- 수준 측량: Adjust the leveling feet at the bottom of the desk legs to ensure the desk is stable and does not wobble.
이미지: 클로즈업 view of the desk's wooden tabletop and the reinforced steel frame, highlighting the stability pipe.
6. 사용 설명서
기본 높이 조절
Use the up (∧) and down (∨) buttons on the control panel to adjust the desk height. Press and hold the button until the desired height is reached.
Image: The control panel of the Fenge Electric Standing Desk, showing the digital display, up/down arrows, memory presets (1-4), and 'S' button for saving settings.
Memory Function (4 Presets)
The desk allows you to save up to four preferred height settings for quick adjustment.
- 원하는 높이로 조정: Use the up (∧) or down (∨) buttons to move the desk to your desired height.
- Press 'S' Button: Press the 'S' button on the control panel. The display will show "S-".
- Select Memory Preset: Within 3 seconds, press one of the number buttons (1, 2, 3, or 4) to save the current height to that preset. The display will show "S-1", "S-2", etc., indicating the height has been saved.
- 프리셋 불러오기: To move the desk to a saved height, simply press the corresponding number button (1, 2, 3, or 4). The desk will automatically adjust to the stored height.
충돌 방지 기능
The desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse by 2-3 cm to prevent damage.
조용한 작동
The desk operates with a low noise level of less than 50 dB, ensuring minimal disturbance in your work environment.
Image: A woman standing comfortably while working at the Fenge Electric Standing Desk, demonstrating its use in a standing position.
7. 유지관리
- 청소: 책상 표면과 프레임을 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 연마성 세제나 강한 화학 물질은 피하세요.
- 케이블 관리 : Regularly check cables for any signs of wear or damage. Ensure cables are neatly organized to prevent entanglement.
- 나사를 조이세요: 안정성을 유지하기 위해 주기적으로 모든 나사를 점검하고 조여주세요.
- 매끄럽게 하기: No special lubrication is required for the lifting mechanism.
8. 문제 해결
책상 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 책상이 움직이지 않아요 | Power cable disconnected or not fully inserted | 전원 케이블이 벽면 콘센트와 제어 박스에 제대로 꽂혀 있는지 확인하십시오. |
| 책상이 불안정하게 움직이거나 이상한 소음이 발생합니다. | Loose connections or obstruction | Check all cable connections. Ensure no objects are obstructing the lifting mechanism. Verify all assembly screws are tight. |
| 디스플레이에 오류 코드가 표시됩니다. | System malfunction or overload | Disconnect power for 10 seconds, then reconnect. If the error persists, reduce the load on the desk. If the issue continues, contact customer support. |
| 메모리 기능이 작동하지 않음 | Height not saved correctly | Follow the memory setting instructions carefully to save the desired height. |
| Anti-collision feature triggers too often | Obstructions in the path of movement | Ensure the desk area is clear of obstructions. If the issue persists and no obstruction is present, contact customer support. |
For problems not listed here or if solutions do not resolve the issue, please contact Fenge customer support.
9. 보증 및 지원
This Fenge Electric Standing Desk comes with a 12개월 보증 from the date of purchase. In the event of initial defects or malfunctions under normal use, returns or exchanges may be possible.
For warranty claims, technical support, or any questions regarding your product, please contact Fenge customer service through the retailer where you purchased the product or visit the official Fenge web연락처 정보 사이트.
연락처 정보:
- Fenge Store on Amazon.co.jp
- Refer to your purchase documentation for direct customer service contacts.
