Altec Lansing Super Lifejacket Jolt Bluetooth Speaker

1. 서론

Thank you for choosing the Altec Lansing Super Lifejacket Jolt Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use.

Image 1: Altec Lansing Super Lifejacket Jolt Bluetooth Speaker. This image shows the front view of the speaker, highlighting its rugged design and speaker grilles.

상자 안에 무엇이 들어있나요?

• Altec Lansing Super Lifejacket Jolt Speaker
• AC 충전 케이블

2. 제품 특징

• Customizable Lights: Features 5 different LED light modes that can illuminate in a solid color, flash, or sync to the beat of your music.
• 진정한 무선 페어링: Allows pairing with another compatible speaker for amp라이파이드 사운드.
• 통합 충전: Includes a Qi wireless charging pad and built-in dual USB charging ports for external devices.
• 배터리 수명 연장: Provides up to 30 hours of battery life.
• 모든 증거: IP68 rated for waterproof, snowproof, and shockproof protection, and designed to float in water.

3. 컨트롤 및 표시기

Familiarize yourself with the buttons and controls located on the top panel of your Super Lifejacket Jolt speaker.

• 전원 버튼 (⏻): 3~5초간 길게 눌러 스피커를 켜거나 끕니다.
• Link Button (🔗): Used to connect your speaker to Bluetooth and to enable House Party pairing mode.
• Lighting Button (✱): Controls the lighting effects on your speaker. Cycle through multicolor slow fade, beat-to-music, solid color, slow fade, and off.
• 마이너스 버튼(-): Decreases music volume. Can also be used to go back to the previous song.
• 플러스 버튼(+): Increases music volume. Allows you to jump to the next song.
• 마이크 버튼(🎤): Answers calls and accesses voice assistant features.
• Qi Charging Pad: Located on the top center, allows for wireless charging of Qi-enabled devices.

4. 설정

4.1 스피커 충전

Before initial use, fully charge your Super Lifejacket Jolt speaker. A full charge typically takes 5 to 6 hours.

1. Open the protective flap on the side of the speaker to reveal the charging port.
2. Plug one end of the included AC charging cable into the DC IN port on the speaker.
3. 충전 케이블의 다른 쪽 끝을 전원에 연결합니다.
4. The power button LED will illuminate red while charging. It will turn off when fully charged.

Image 2: Speaker with charger. This image displays the speaker alongside its AC charging adapter, illustrating the charging setup.

4.2 전원 켜기/끄기

To power on your speaker, press and hold the Power Button (⏻) located on the top of the speaker for 3 to 5 seconds. You will hear an audible prompt indicating it's powering on. To power off, repeat the same action.

4.3 블루투스 페어링

After powering on, the LED light on the Link Button (🔗) will begin flashing blue, indicating it's ready for pairing.

1. 기기(스마트폰, 태블릿 등)에서 Bluetooth를 활성화하세요.
2. 검색 사용 가능한 블루투스 장치.
3. Select "Super Lifejacket Jolt" from the list.
4. Once paired, the Link Button LED will stop flashing and remain solid blue.

5. 사용 설명서

5.1 Qi 무선 충전

The speaker features a Qi wireless charging pad to charge compatible devices. Ensure your speaker is powered on to use this feature.

1. Place your Qi-enabled device directly onto the Qi charging pad on top of the speaker.
2. Your device should indicate that it is charging wirelessly.

Image 3: Speaker at a picnic. This image shows the speaker in an outdoor setting, with a smartphone placed on its Qi charging pad.

5.2 맞춤형 LED 조명

조명 버튼(✱) to cycle through the 5 available LED light modes:

• Multicolor Slow Fade
• Beat-to-Music
• 단색
• 천천히 사라지다
• 끄다

5.3 House Party Pairing

For an enhanced audio experience, you can pair two Super Lifejacket Jolt speakers together using House Party pairing mode. Refer to the Altec Lansing website for detailed instructions on enabling this feature.

6. 유지관리

The Super Lifejacket Jolt is designed for durability and outdoor use with an IP68 rating, making it waterproof, snowproof, and shockproof. It also floats in water.

Image 4: Speaker floating in water. This image demonstrates the speaker's ability to float, highlighting its waterproof design.

청소:

스피커를 청소하려면 부드러운 천을 사용하십시오.amp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish or protective seals. Ensure all port covers are securely closed before exposing the speaker to water.

저장:

장시간 사용하지 않을 때는 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.

7. 문제 해결

If you encounter issues with your speaker, try the following steps:

• 전원 없음: Ensure the speaker is fully charged. Connect it to a power source using the provided AC adapter.
• 블루투스를 페어링할 수 없습니다: Make sure the speaker is in pairing mode (flashing blue LED on Link Button). Turn off and on your device's Bluetooth, then try pairing again. Ensure no other devices are currently connected to the speaker.
• 소리 없음: Check the volume levels on both the speaker and your connected device. Ensure the speaker is successfully paired via Bluetooth.
• Qi Charging Not Working: Confirm your device is Qi-enabled and properly aligned on the charging pad. Ensure the speaker is powered on.

For further assistance, please visit the Altec Lansing support web대지.

8. 사양

9. 보증 및 지원

보증 정보:

이 제품에는 다음이 포함되어 있습니다. 1년 전체 보증 from the manufacturer, Altec Lansing. Please retain your proof of purchase for warranty claims.

고객 지원:

For additional support, troubleshooting tips, or to register your product, please visit the official Altec Lansing web대지: www.alteclansing.com