Vimar 19593 Arké 커넥티드 IoT 액추에이터 사용자 설명서

1. 서론

The Vimar 19593 Arké Connected IoT Actuator is an electronic control device designed for smart home environments. It features a NO 16 A relay output and supports dual IoT technology: Bluetooth 5.0 for the Vimar VIEW wireless mesh system and Zigbee 3.0 for broader compatibility. This actuator allows for both local control via a physical button and remote control through dedicated applications. It also includes instantaneous power measurement and energy consumption monitoring capabilities, along with an RGB LED for status indication and adjustable intensity.

This manual provides essential information for the safe installation, operation, and maintenance of your Vimar 19593 Arké Connected IoT Actuator.

2. 안전 정보

• 전기 설치: Installation must be performed by qualified personnel in compliance with local electrical codes and regulations.
• 전원 공급 장치: Ensure the power supply (100-240 V ~ 50/60 Hz) matches the device specifications before installation.
• 전원 분리: Always disconnect power at the main circuit breaker before performing any installation, wiring, or maintenance.
• 실내에서만 사용 가능: This device is intended for indoor use in dry environments. Do not expose to moisture or extreme temperatures.
• 과부하를 피하십시오: Do not exceed the maximum load rating of 16 A for the relay output.
• 어린이와 애완동물: 기기 및 구성품은 어린이와 반려동물의 손이 닿지 않는 곳에 보관하십시오.

3. 제품 오버view

The Vimar 19593 Arké Connected IoT Actuator is a compact module designed for integration into standard electrical systems. It features a physical button for local control and pairing, and an RGB LED indicator for status feedback.

그림 1: 앞쪽 view of the Vimar 19593 Arké Connected IoT Actuator. It is a dark gray rectangular module with a small indicator light and a circular button at the bottom.

그림 2: Close-up of the actuator showing a symbol for wireless connectivity and the control button.

주요 구성 요소:

• 제어 버튼: Used for local ON/OFF control and initiating the pairing process.
• RGB LED 표시등: Provides visual feedback on device status, pairing mode, and can be adjusted for intensity.
• 릴레이 출력: Connects to the load (e.g., lights, appliances) for switching ON/OFF.
• 무선 모듈: Integrated Bluetooth 5.0 and Zigbee 3.0 for smart home connectivity.

4. 설정

4.1 물리적 설치

1. 전원 분리: 시작하기 전에 설치 구역의 주 전원이 차단기에서 꺼져 있는지 확인하십시오.
2. 배선: Connect the actuator according to the provided wiring diagram (typically found on the device itself or in the packaging). Ensure correct connection of live, neutral, and load wires to the appropriate terminals. This device is designed for modular, flush-mounted, or wall-mounted installations.
3. 보안 장치: Mount the actuator securely within the electrical box or housing.
4. 복원력 : 설치가 완료되고 모든 연결이 안전한 경우 회로 차단기에서 전원을 복구하세요.

4.2 앱 설치 및 페어링

The Vimar 19593 supports two primary wireless technologies for smart home integration: Bluetooth 5.0 (via Vimar VIEW Wireless app) and Zigbee 3.0 (via compatible Zigbee hubs and apps).

그림 3: 비마르 VIEW App icon, used for managing the actuator.

1. 앱 다운로드 : 다운로드 비마르 VIEW 무선 전화 app from your device's app store (for Bluetooth control) or a compatible Zigbee hub app (e.g., Amazon Alexa app for Zigbee).
2. 계정 생성: Open the app and create an account if you don't already have one.
3. 페어링 모드 시작: Press and hold the physical control button on the actuator for approximately 5 seconds. The RGB LED will begin to pulse blue, indicating it is in pairing mode.
4. 앱에 장치 추가: Follow the on-screen instructions in your chosen app to add a new device. The app should detect the Vimar 19593 actuator.
5. Select Technology: Within the Vimar VIEW Wireless app, you can switch between Bluetooth and Zigbee modes if needed. For Zigbee, ensure your Zigbee hub is also in pairing mode.
6. 설정 완료: Assign a name to your device and configure any initial settings as prompted by the app.

5. 사용 설명서

5.1 로컬 제어

• 켜기/끄기: Briefly press the physical control button on the actuator to toggle the connected load ON or OFF.

5.2 앱을 통한 원격 제어

Once paired, you can control the actuator remotely using the Vimar VIEW Wireless app (for Bluetooth) or a compatible Zigbee app.

그림 4: Example of the Vimar app interface showing energy monitoring for connected devices.

• Toggle Load: Open the app, select your Vimar 19593 actuator, and use the virtual button to switch the connected load ON or OFF.
• 에너지 모니터링: The app provides real-time instantaneous power measurement and tracks consumed energy. This feature allows you to monitor the power usage of the connected appliance.
• RGB LED Adjustment: Adjust the intensity and potentially the color (if supported by the app) of the RGB LED indicator through the app settings.

5.3 음성 제어 통합

The actuator can be integrated with voice assistants through compatible smart home hubs (e.g., Amazon Alexa for Zigbee). Refer to your voice assistant's setup guide for integration steps.

그림 5: Illustration of a smart plug (similar to actuator function) being controlled via voice commands and a smartphone app.

6. 유지관리

• 청소: Disconnect power before cleaning. Use a soft, dry cloth to wipe the device. Do not use liquid cleaners or abrasive materials.
• 펌웨어 업데이트: Periodically check the Vimar VIEW Wireless app for available firmware updates to ensure optimal performance and security. Follow the app's instructions for any update procedures.
• 정기 점검: Occasionally inspect the device for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

7. 문제 해결

• 장치가 응답하지 않음:
  • 전원 공급 장치가 작동 중인지 확인하십시오.
  • Ensure the device is properly wired.
  • If using a Vimar Gateway, confirm it has an active internet (CLOUD) connection, as loss of connection may prevent operation.
• 페어링 문제:
  • Ensure the actuator's LED is pulsing blue, indicating pairing mode.
  • Verify your smartphone or Zigbee hub is within range.
  • If re-associating, you may need to switch the device to Bluetooth mode via the Vimar Arké app, then back to Zigbee. If this fails, temporarily remove power from the actuator and restore it to attempt a reset before re-pairing.
• LED Not Functioning as Expected (Zigbee Hub):
  • When associated with a generic Zigbee hub, direct control over the LED's function and color may be limited. The LED typically reflects the actuator's ON (blue) or OFF (off) state.
• Power Consumption Readings Missing (Zigbee Hub):
  • Some Zigbee integrations (e.g., ZHA) might not fully support reading power consumption data from this device. Verify compatibility with your specific Zigbee coordinator and integration.
• 공장 초기화 : To perform a factory reset, remove power from the device for a few seconds, then restore it. This may clear all pairing information.

8. 사양

9. 보증

For information regarding the warranty period and terms for your Vimar 19593 Arké Connected IoT Actuator, please refer to the official Vimar website or the warranty documentation included with your purchase. Warranty policies may vary by region and retailer.

10. 지원

For additional instructions, tutorials, and technical support, please visit the official Vimar support web대지:

faidate.vimar.com

You can also contact Vimar customer service directly for assistance with product inquiries, troubleshooting, or warranty claims.