Bryton Rider 320 GPS Cyclocomputer User Manual

1. 서론

The Bryton Rider 320 is a high-performance GPS cyclocomputer designed for cyclists seeking comprehensive ride data. It features a clear 2.3-inch LCD display, long battery life, and support for various sensors to track speed, cadence, and heart rate. This manual provides essential information for setting up, operating, and maintaining your device.

Image: Bryton Rider 320 GPS Cyclocomputer device.

2. 상자 안에 무엇이 들어있나요?

Upon opening your Bryton Rider 320 package, verify that all components are present:

• Bryton Rider 320 GPS Cyclocomputer
• USB 케이블 (마이크로 USB)
• 심박수 센서
• 핸들바 마운트
• 사용 설명서(본 문서)

Note: The specific contents may vary slightly depending on the purchased bundle (e.g., "T" bundle includes sensors).

3. 설정

3.1 기기 충전

Before first use, fully charge your Rider 320. Connect the provided Micro USB cable to the device's charging port and plug the other end into a USB power adapter or computer. The device will indicate charging status. A full charge provides approximately 35 hours of battery life.

3.2 장치 장착

Attach the handlebar mount to your bicycle's handlebars or stem using the provided O-rings or zip ties. Ensure the mount is secure and positioned for optimal viewing. Align the Rider 320 with the mount and twist it clockwise until it locks into place.

3.3 센서 페어링

The Rider 320 supports Bluetooth and ANT+ sensors. To pair a sensor (e.g., heart rate, cadence, speed):

1. Power on your Rider 320.
2. 로 이동 설정 메뉴.
3. 선택하다 센서 그런 다음 센서 추가.
4. Activate the sensor (e.g., wear the heart rate strap, spin the crank for cadence).
5. The Rider 320 will scan for available sensors. Select your sensor from the list to pair it.
6. 페어링을 확인하세요.

Note: Ensure sensors are within range and have working batteries.

3.4 초기 구성

Upon first power-on or after a factory reset, you will be prompted to set basic preferences:

• 언어: 원하는 언어를 선택하세요.
• 단위: Choose between Metric (km/h, km) or Imperial (mph, miles).
• 시간대: 현지 시간대를 설정하세요.
• 사용자 프로file: Enter basic information like age, weight, and height for accurate calorie and training calculations.

3.5 Bryton Active App Connection

The Bryton Active app (available for iOS and Android) enhances your Rider 320 experience. Download the app and create an account. To connect your device:

1. 스마트폰에서 블루투스를 활성화하세요.
2. Open the Bryton Active app and navigate to the device pairing section.
3. On your Rider 320, go to 설정 > 블루투스 > 앱과 페어링.
4. 앱의 화면 안내에 따라 페어링 과정을 완료하세요.

The app allows for display customization, firmware updates, and automatic ride data synchronization.

Image: Bryton Rider 320 display showing various data fields.

4. 장치 작동

4.1 전원 켜기/끄기

• 전원 켜기: Press and hold the power button (usually on the side or bottom) until the Bryton logo appears.
• 전원 끄기 : 전원 버튼을 길게 누르면 전원 끄기 메시지가 나타난 후 확인합니다.

4.2 기본 탐색

The Rider 320 typically uses physical buttons for navigation. Refer to the device's button layout for specific functions:

• 위/아래 버튼: Navigate through menus or change data pages during a ride.
• OK/ENTER button: 선택 사항을 확인하거나 녹화를 시작/중지하세요.
• BACK/LAP button: Go back in menus or mark a lap during a ride.

4.3 라이드 시작

1. Ensure the device has acquired a GPS signal (indicated by a solid GPS icon).
2. 를 누르세요 확인/입력 button to start recording your ride.
3. During the ride, you can switch between data pages using the UP/DOWN buttons.
4. 일시 정지하려면 확인/입력 button. To resume, press it again.
5. To end and save the ride, press and hold the 확인/입력 button, then confirm saving.

4.4 디스플레이 사용자 지정

The Rider 320 allows extensive customization of its data display pages. This can be done directly on the device or more conveniently through the Bryton Active app. You can select which data fields (e.g., speed, distance, heart rate, cadence, power, altitude) appear on each page and the number of fields per page.

4.5 GPS 기능

The integrated GPS sensor provides accurate tracking of your location, speed, distance, and altitude. For best GPS performance, ensure the device has a clear view of the sky when starting a ride.

4.6 데이터 동기화

After completing a ride, you can synchronize your data to the Bryton Active app via Bluetooth. Once synced to the app, your ride data can be automatically uploaded to third-party platforms like Strava, TrainingPeaks, or Komoot, if configured in the app settings.

5. 유지관리

5.1 청소

부드러운 천으로 정기적으로 장치를 청소하십시오.amp 천을 사용하세요. 강한 화학 약품이나 연마성 세척제는 화면을 손상시킬 수 있으므로 사용하지 마세요.asing. Ensure the USB port cover is securely closed to maintain its IP54 water resistance rating.

5.2 배터리 관리

배터리 수명을 극대화하려면:

• 충전 및 보관 시 극한의 온도 변화를 피하십시오.
• 기기를 장시간 완전히 방전된 상태로 두지 마십시오.
• For long-term storage, charge the device to approximately 50-70%.

5.3 펌웨어 업데이트

Bryton periodically releases firmware updates to improve performance, add features, and fix bugs. It is recommended to keep your device's firmware up to date. Updates can typically be performed via the Bryton Active app or by connecting the device to a computer and using Bryton's update tool.

6. 문제 해결

6.1 GPS 신호 문제

• 신호 없음: 야외에 있을 때는 깨끗한지 확인하세요. view 하늘을 바라보세요. 고층 건물이나 빽빽한 나무숲은 피하세요.
• 느린 습득: Allow a few minutes for the device to acquire a signal, especially if it's been moved a significant distance since its last use.

6.2 센서 연결 문제

• Sensor Not Found: Check if the sensor is active (e.g., spinning the wheel/crank, wearing the heart rate strap). Ensure the sensor's battery is not depleted.
• 간섭: 간섭을 일으킬 수 있는 다른 전자 장치에서 멀리 떨어지세요.
• 수리하다: Try unpairing and re-pairing the sensor through the device settings.

6.3 Bryton Active App Sync Issues

• 연결 실패: Ensure Bluetooth is enabled on your phone and the Rider 320. Restart both the device and the app.
• 슬로우 싱크: Data transfer can sometimes be slow. Ensure a stable Bluetooth connection and sufficient battery on both devices.
• Data Loss (Rare): If you experience data loss or persistent sync issues, try updating the device firmware and reinstalling the app. Contact Bryton support if problems persist.

6.4 장치가 응답하지 않음

If the device freezes or becomes unresponsive, perform a soft reset by pressing and holding the power button for approximately 10-15 seconds until it powers off. Then, power it back on normally.

7. 사양

8. 보증 및 지원

Bryton products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Bryton website. For technical support, troubleshooting assistance, or service inquiries, please contact Bryton customer support through their official web현장이나 공인 서비스 센터로 문의하세요.

공식 브라이튼 Web대지: www.brytonsport.com