1. 서론
This manual provides detailed instructions for the proper installation, operation, and maintenance of your APS 6-inch Aluminum Black Running Boards. Please read this manual thoroughly before beginning installation to ensure correct procedure and safe use. These running boards are designed for specific Ford Transit Full Size Van 3-Door models from 2015 to 2026, excluding the 2022-2026 E-Transit.
2. 안전 정보
Always prioritize safety during installation and use. Failure to follow safety guidelines may result in injury or damage to the product or vehicle.
- 설치 작업 중에는 안전 고글과 장갑을 포함한 적절한 개인 보호 장비를 착용하십시오.
- 설치를 시작하기 전에 차량이 평평한 곳에 주차되어 있고 주차 브레이크가 걸려 있는지 확인하십시오.
- Do not exceed the maximum weight limit of 500 pounds for these running boards.
- Regularly inspect all mounting hardware for tightness and signs of wear or damage.
- Keep hands and clothing clear of moving parts if the vehicle is lifted during installation.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 사이드 스텝(러닝 보드) 한 쌍
- 장착 브라켓 키트
- 사용 설명서(본 문서)
4. 필요한 도구
일반적으로 설치에는 다음과 같은 도구가 필요합니다.
- 소켓 렌치 세트
- 오픈 엔드 렌치 세트
- Drill (for drilling required mounting points)
- Drill Bits (appropriate sizes for mounting hardware)
- 줄자
- 마커 또는 스크라이브
- 안전 안경
- 장갑
5. 설치 지침
These running boards feature an easy DIY rocker panel mount design. Drilling is required for proper installation on your Ford Transit van.
5.1. 사전 설치 단계
- 모든 구성품을 풀어서 패키지 내용물 목록과 비교해보세요.
- 시작하기 전에 모든 지침을 읽어보세요.
- Identify the driver and passenger side running boards. Note that these running boards are designed with different lengths for each side: approximately 31 inches for the driver's side and 96 inches for the passenger's side.
5.2. 마운팅 브라켓 설치
- Locate the designated mounting points on the vehicle's rocker panel. These points may be pre-drilled or require drilling.
- If drilling is required, carefully measure and mark the drill locations according to the provided template or vehicle-specific instructions (refer to the PDF manual for precise details if available).
- Drill pilot holes, then enlarge to the appropriate size for the mounting hardware.
- Attach the mounting brackets to the vehicle using the supplied hardware. Do not fully tighten at this stage.
5.3. Running Board Attachment
- Carefully position the running board onto the installed mounting brackets.
- Secure the running board to the brackets using the provided hardware.
- Adjust the running board for proper alignment and levelness.
- Once aligned, fully tighten all mounting hardware for both the brackets and the running boards. Ensure all bolts are torqued to the manufacturer's specifications (refer to the PDF manual for specific torque values if available).
5.4. 설치 후 점검
- 모든 패스너가 단단히 조여졌는지 다시 확인하십시오.
- Test the stability of the running boards by applying moderate weight.
- Remove any tools or debris from the work area.
5.5. 설치 비디오 참조
The following video provides a general demonstration of running board installation and functionality, similar to the iBoard design used in APS running boards. While not specific to your exact vehicle model, it can offer helpful visual guidance.
6. 운영
These running boards provide a stable step for easier entry and exit from your vehicle. Step onto the board firmly and centrally. The anti-slip high-grip tread pad ensures secure footing in various weather conditions. Always ensure the running boards are clear of obstructions before stepping on them.
7. 유지관리
Regular maintenance will prolong the life and appearance of your running boards:
- 청소: Wash the running boards regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the powder-coated finish.
- 점검: Periodically inspect all mounting hardware (bolts, nuts, brackets) for tightness. Re-tighten any loose fasteners to prevent rattling or instability.
- 손상 확인: Check for any signs of damage, such as bends, cracks, or excessive wear on the step pads. Replace damaged components immediately.
8. 문제 해결
문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Running board feels loose or rattles | 느슨한 장착 하드웨어 | Inspect and re-tighten all bolts and nuts on the mounting brackets and running boards. |
| Unusual noise during vehicle movement | Loose hardware or contact with vehicle body | Check all mounting points for tightness. Ensure running boards are not making contact with the vehicle's undercarriage or body panels. |
| Difficulty stepping on the board | 방해 또는 손상 | Clear any debris from the step surface. Inspect for physical damage that might affect its integrity. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | IB-FR405N-1 |
| 재료 | 6061 Aircraft Aluminum |
| 외부 마감 | 무광 블랙 파우더 코팅 마감 |
| 치수(길이 x 너비 x 높이) | 96 x 6 x 3.25 inches (Passenger side) / 31 x 6 x 3.25 inches (Driver side) |
| 품목 무게 | 41.5 파운드 |
| 중량 제한 | 500 파운드 |
| 차량 서비스 유형 | Van (Ford Transit 2015-2026 Full Size Van 3-Door, Excludes 2022-2026 E-Transit) |
| 설치 유형 | Rocker Panel Mount (Drilling Required) |
10. 보증 정보
This APS product comes with a Limited 3-Year Warranty. This warranty covers defects in material and workmanship under normal use. For specific terms, conditions, and claim procedures, please refer to the official warranty documentation provided with your purchase or contact APS customer support.
11. 고객 지원
If you have any questions regarding the installation, operation, maintenance, or warranty of your APS Running Boards, please contact APS customer support. Refer to your purchase documentation for contact details or visit the official APS web도움이 필요한 경우 사이트를 방문하세요.