소개
Thank you for choosing Linkind Solar Motion Sensor Lights. This manual provides essential information for the proper installation, operation, and maintenance of your new solar lights. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
제품 특징
- 1000LM Brightness: Provides exceptional illumination, significantly brighter than standard garden lights, with enhanced optical lenses for wider and brighter light projection.
- 3 Operating Modes with Motion Sensor: Offers versatile lighting options to suit various needs and conserve energy.
- 3000K Warm White Light and IP67 Protection: Delivers a warm white light for optimal nighttime security and is highly resistant to all weather conditions.
- 간편한 무선 설치: Simple two-step installation for ground insertion or wall mounting, integrating seamlessly into your outdoor space.
- Energy Saving and Safety: Equipped with a rechargeable lithium battery, charging during the day and automatically illuminating at night without energy consumption, overheating, or overcharging risks.
- 조정 가능한 각도: The light head can be adjusted 180° vertically and 360° horizontally for precise illumination.
패키지 내용
패키지에 모든 구성품이 들어 있는지 확인하세요.
- Linkind Solar Motion Sensor Lights (2 units)
- 지지대 (2개)
- Wall Mount Brackets (2 units)
- 나사 및 벽면 플러그
- 사용자 설명서
설정 및 설치
Your Linkind Solar Motion Sensor Lights can be installed in two ways: ground inserted or wall mounted.
중요 설치 팁:
- Ensure the solar panel receives direct sunlight for at least 6-8 hours daily for optimal charging.
- Avoid installing the light under strong artificial light sources (e.g., streetlights) at night, as this may prevent the light from turning on automatically.
- Do not install in shaded areas or where mutual exposure to other lights might occur.
Figure 1: Optimal and suboptimal installation locations for solar lights.
접지 삽입:
- Select the desired operating mode using the button on the light unit.
- Assemble the holder to the light unit.
- Connect the ground spike to the assembled unit.
- Insert the spike firmly into the ground in your desired location.
벽면 장착:
- Select the desired operating mode using the button on the light unit.
- Fix the wall mount bracket to the wall using the provided screws and wall plugs.
- Connect the light unit to the fixed wall mount bracket.
- Adjust the angle of the light unit to your preference.
Figure 2: Installation steps for ground insertion and wall mounting.
Figure 3: Product dimensions and adjustable features.
작동 지침
The Linkind Solar Motion Sensor Lights feature three distinct operating modes, selectable via a button on the unit. The light charges during the day and automatically activates at night based on the selected mode.
모드 선택:
- Mode 1 (Soft Light Mode): Provides continuous low-level light throughout the night. The motion sensor is inactive in this mode.
- Mode 2 (Dim-Bright-Dim Sensor Mode): The light stays at a low intensity. When motion is detected (within 120°/8m), the light brightens to 100% for 20 seconds, then returns to low intensity.
- Mode 3 (Off-Bright-Off Sensor Mode): The light remains off. When motion is detected (within 120°/8m), the light turns on at 100% brightness for 20 seconds, then turns off completely.
그림 4: 3가지 조명 모드의 시각적 표현.
Figure 5: Day charging and night motion detection functionality.
Figure 6: Motion detection range and angle.
유지
태양광 조명의 최적 성능과 긴 수명을 보장하려면 다음 유지 관리 지침을 따르십시오.
- 깨끗한 태양광 패널: 부드러운 천으로 태양광 패널을 정기적으로 닦아주세요.amp 먼지, 오물 및 이물질을 제거하는 천입니다. 패널이 깨끗해야 효율적인 충전이 가능합니다.
- 장애물 제거: Ensure no trees, bushes, or other objects block direct sunlight from reaching the solar panel, especially during winter months.
- 배터리 관리 : While the battery is designed for long life, if the light's performance significantly degrades over time, ensure it's receiving adequate sunlight.
- 내후성: The IP67 rating ensures resistance to rain and dust. However, extreme weather conditions like heavy snow or prolonged sub-zero temperatures might temporarily affect performance.
Figure 7: The solar light's IP67 waterproof design.
문제 해결
If your Linkind Solar Motion Sensor Light is not functioning as expected, please refer to the following common issues and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 밤에는 불이 켜지지 않습니다. | Insufficient charging during the day. | 태양광 패널이 6~8시간 동안 직사광선을 받을 수 있도록 하십시오. 태양광 패널을 청소하십시오. |
| Light flickers or stays dim. | Low battery charge or partial obstruction. | Allow for a full day of charging. Check for any objects partially shading the solar panel. |
| 모션 센서가 감지되지 않습니다. | Light is in Mode 1 (Soft Light Mode) or sensor is obstructed. | Switch to Mode 2 or 3. Ensure the sensor is clear of obstructions and facing the desired detection area. |
| 불이 너무 빨리 꺼져요. | 배터리 충전량이 부족합니다. | Ensure the solar panel receives maximum sunlight for a full charge. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 링크드인 |
| 모델 번호 | LL1800332 |
| 색상 | 따뜻한 흰색 |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| 고정구 모양 | Wall Mounted / Spotlight |
| 제품 크기(L x W x H) | 15L x 10W x 29H 센티미터 |
| 품목 무게 | 580그램 |
| 실내/실외 사용 | 집 밖의 |
| 전원 | 태양열 전원 |
| 특징 | Motion Sensor, Adjustable Height, Lightweight, Energy Efficient, Waterproof |
| 제어 방법 | 촉각(버튼) |
| 전구 유형 | 주도의 |
| 전구의 수 | 22 |
| 권tage | 12볼트(DC) |
| 밝은 색상 | 따뜻한 흰색 |
| 방수 수준 | IP67 |
| 왓tage | 4 와트 |
| 광효율성 | 650루멘 |
| 색온도 | 3000 켈빈 |
| 최대 광속 | 650루멘 |
| 설치 유형 | Ground Mount, Wall Mount |
| 조립이 필요합니다 | 예 |
| 규정 준수 사양 | CE, FCC |
| 한국어: | 791378856268 |
보증 및 지원
Linkind products come with a limited warranty. For any questions, assistance, or warranty claims, please contact Linkind customer support. We offer 24/7 customer support to ensure your satisfaction.
Please refer to your purchase documentation or the Linkind official web구체적인 보증 조건과 연락처 정보는 해당 사이트를 참조하세요.