BOSSIN MSG-TP-NE-FT00 Gaming Chair Instruction Manual

1. 서론

Thank you for choosing the BOSSIN MSG-TP-NE-FT00 Big and Tall Gaming Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

Figure 1: BOSSIN MSG-TP-NE-FT00 Gaming Chair (Tiffany Blue variant)

2. 안전 정보

• 화재 위험: Keep the chair away from open flames and heat sources.
• 수분 노출: Avoid exposing the chair to water or excessive moisture.
• 중량 용량: 최대 중량 용량인 400파운드(181kg)를 초과하지 마십시오.
• 집회: Ensure proper assembly according to the instructions to prevent instability and injury.
• 점검: Regularly inspect the chair for any loose parts, damage, or wear before each use. Discontinue use if any issues are found.

3. 패키지 내용

Before assembly, please verify that all components are present and undamaged. The package includes:

• 의자 등받이
• Seat Base with Footrest Mechanism
• 팔걸이(2)
• 스타베이스
• 캐스터 (5)
• 가스 리프트 실린더 (커버 포함)
• 메커니즘 플레이트
• 허리 지지 베개 (마사지 기능 포함)
• 머리받침 베개
• 하드웨어 키트(나사, 와셔, 육각 렌치)
• 사용 설명서

4. 설치 및 조립

조립은 간단합니다. 다음 단계를 주의 깊게 따라주세요.

1. 스타베이스에 캐스터 부착: Insert each of the five casters into the holes at the end of the star base legs until they click securely into place.
2. 가스 리프트 설치: Place the gas lift cylinder into the center hole of the star base. Cover it with the telescopic plastic cover.
3. 메커니즘 플레이트를 시트 베이스에 부착하십시오: Align the mechanism plate with the pre-drilled holes on the underside of the seat base. Secure it using the provided screws and Allen wrench. Ensure the front of the mechanism faces the front of the seat.
4. 팔걸이 부착: Secure the armrests to the seat base using the designated screws. Ensure they are firmly attached.
5. Connect Backrest to Seat Base: Align the backrest with the brackets on the seat base. Secure it using the provided screws.
6. 가스 리프트에 시트 어셈블리 장착: 조립된 좌석을 가스 리프트 실린더에 조심스럽게 올려놓고 중앙에 위치하며 안정적으로 고정되었는지 확인하세요.
7. 머리받침과 요추 베개 부착: Secure the headrest pillow to the top of the backrest using its straps. Attach the lumbar support pillow to the lower backrest using its straps. The lumbar pillow can be adjusted vertically for optimal comfort.

Figure 2: Assembled chair with headrest and lumbar support

5. 사용 설명서

5.1. 높이 조절

의자 높이를 조절하려면 의자 좌석 오른쪽에 있는 레버를 위로 당기면서 손잡이를 잡거나 놓으십시오.asing your body weight. Release the lever at your desired height.

5.2. 등받이 각도 조절

To recline the backrest, pull the lever on the left side of the seat upwards and lean back. Release the lever to lock the backrest in your preferred position. The chair offers a wide range of recline angles for various activities.

Figure 3: Chair in a reclined position

5.3. 발받침대 작동

The integrated footrest can be extended for added comfort. Pull the footrest handle located under the front of the seat outwards. Flip the padded section over and extend it to your desired length. To retract, push the footrest back under the seat.

Figure 4: Chair with footrest extended for relaxation

5.4. 허리 마사지 기능

The lumbar support pillow features a massage function. Connect the USB cable from the pillow to a compatible USB power source (e.g., computer, power bank). The massage function will activate, providing gentle vibration for lower back comfort. Disconnect the USB cable to turn off the massage function.

6. 유지관리

• 청소: 인조 가죽 표면은 부드러운 천으로 닦아주세요.amp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 피하세요.
• 정기 검사: 정기적으로 모든 나사와 볼트가 단단히 조여져 있는지 확인하십시오. 필요한 경우 다시 조이십시오.
• 의자 옮기기: 의자를 옮길 때는 끌지 말고 들어 올려서 받침대나 바닥이 손상되지 않도록 하세요.

7. 문제 해결

• 의자가 흔들거려요: Check all assembly screws and bolts to ensure they are securely tightened. Ensure the casters are fully inserted into the star base.
• 높이 조절이 작동하지 않음: Verify that the gas lift lever is fully engaged and that the gas lift cylinder is correctly installed in the star base and seat mechanism.
• 등받이가 기울어지지 않거나 잠기지 않음: Ensure the recline lever is functioning correctly and not obstructed. Check for any foreign objects in the recline mechanism.
• Footrest Not Extending/Retracting Smoothly: Inspect the footrest rails for any obstructions or damage. Apply a small amount of silicone lubricant if necessary.
• 마사지 기능이 작동하지 않음: Ensure the USB cable is securely connected to both the lumbar pillow and a working USB power source. Try a different USB port or power source.

8. 사양

9. 보증 및 지원

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official BOSSIN website. Please have your model number (MSG-TP-NE-FT00) and purchase date available when contacting support.

10. 제품 비디오

No official seller videos are available for embedding in this manual. For additional product demonstrations, please refer to the product page on Amazon or the manufacturer's web대지.