ATuMan LS-P 40m 레이저 거리 측정기 사용 설명서

1. 서론

The ATuMan LS-P 40m Laser Distance Meter is a high-precision, portable device designed for accurate and reliable measurements. It integrates multiple functions including distance, area, volume, angle, and Pythagorean measurements, making it a versatile tool for various applications.

Key features of this device include:

• High precision for accurate and reliable measuring.
• 11 functions controlled with two intuitive keys.
• Supports up to 3500 measurements on a single charge.
• Capable of volume, angle, area, and distance measurements.

그림 1: 전면 view of the ATuMan LS-P 40m Laser Distance Meter, displaying its screen and single control button.

2. 설정

2.1 장치 충전

The LS-P 40m is equipped with a built-in Lithium Ion battery. Before first use, or when the battery indicator shows low power, charge the device using the provided USB cable.

1. Connect the small end of the USB cable to the charging port on the side of the device.
2. USB 케이블의 다른 쪽 끝을 표준 USB 전원 어댑터(별도 구매) 또는 컴퓨터의 USB 포트에 연결하십시오.
3. The charging indicator on the screen will show the charging status. A full charge supports approximately 3500 measurements.

Figure 2: The LS-P 40m device connected to a USB cable for charging, highlighting its USB flash charging capability.

2.2 전원 켜기/끄기

• To power on: Press and hold the main button until the screen illuminates.
• To power off: Press and hold the main button until the screen turns off. The device also features an automatic power-off function after a period of inactivity to conserve battery.

3. 사용 설명서

The LS-P 40m features a simple two-key control system for all its 11 functions. The primary button is used for measurements and mode selection, while the secondary button (if present, or a long press of the primary) is for switching modes or clearing data.

그림 3: 이상view of the device's capabilities, emphasizing its high precision, 11 functions, and long battery life for up to 3500 measurements.

3.1 기본 거리 측정

1. Ensure the device is powered on and in basic distance measurement mode (usually the default).
2. 레이저 빔을 표적 표면에 향하게 합니다.
3. Press the main button once to activate the laser.
4. Press the main button again to take the measurement. The distance will be displayed on the screen.

그림 4: 예amples of practical applications, including distance measurement for furniture and area measurement for a window.

3.2 면적 측정

1. Switch to Area Measurement mode. This is typically done by pressing the mode button until the area icon appears on the screen.
2. Measure the length of the first side (e.g., width) by pointing the laser and pressing the main button.
3. Measure the length of the second side (e.g., height) by pointing the laser and pressing the main button.
4. 이 장치는 자동으로 면적을 계산하여 표시합니다.

3.3 체적 측정

1. Switch to Volume Measurement mode.
2. Measure the length, width, and height sequentially as prompted by the device's display.
3. 이 장치는 자동으로 볼륨을 계산하고 표시합니다.

Figure 5: Visual representations of volume measurement within a room and angle measurement on a staircase.

3.4 각도 측정

1. Switch to Angle Measurement mode.
2. Follow the on-screen prompts to measure the necessary points to determine the angle.
3. The calculated angle will be displayed.

3.5 피타고라스 측정

The device supports various Pythagorean modes (e.g., single Pythagorean, double Pythagorean) to calculate indirect measurements. Refer to the on-screen icons for specific prompts for each Pythagorean function.

1. Select the desired Pythagorean mode.
2. Measure the required sides as indicated by the flashing segments on the display.
3. 이 장치는 미지수의 길이를 계산하여 표시합니다.

4. 유지관리

4.1 청소

• 부드러운 천으로 장치를 닦으십시오. damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• Ensure the laser lens and display are clean for optimal performance. Use a lens cleaning cloth if necessary.

4.2 보관

• 본 기기는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
• The device features an aluminum-magnesium alloy casing for durability, but it should still be protected from drops and impacts.

그림 6: 자세한 view of the device's robust aluminum-magnesium alloy casing, designed for durability.

4.3 배터리 관리

• 배터리 수명을 유지하려면 기기를 자주 사용하지 않더라도 정기적으로 배터리를 충전하십시오.
• 충전하기 전에 배터리를 완전히 방전시키지 마세요.
• 장기간 보관할 경우, 보관 전에 배터리를 약 50% 정도 충전하십시오.

5. 문제 해결

5.1 장치 전원이 켜지지 않음

• Ensure the battery is sufficiently charged. Connect the device to a USB charger and allow it to charge for at least 30 minutes before attempting to power on again.
• Press and hold the power button for several seconds to ensure proper power-on attempt.

5.2 Inaccurate Measurements or Laser Not Visible

• Ensure the laser lens is clean and free from dust or smudges.
• Measurements taken in bright sunlight or on highly reflective/absorbent surfaces may be less accurate or difficult to obtain. Try to measure in shaded areas or use a target plate if available.
• Verify that the measurement reference point (front or rear of the device) is correctly set for your application.

5.3 짧은 배터리 수명

• 사용하기 전에 장치가 완전히 충전되었는지 확인하십시오.
• Frequent use of the laser or backlight can consume battery faster.
• Battery performance can degrade over time. If battery life significantly shortens, consider contacting customer support.

6. 사양

Figure 7: The compact size of the LS-P 40m, demonstrating its portability as it fits into a shirt pocket.

7. 보증 및 지원

Specific warranty details are not provided in the product information. For warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly through their official channels. Keep your purchase receipt as proof of purchase.