소개
This manual provides detailed instructions for the assembly, operation, and maintenance of your Suptek MST002 Monitor Stand. Please read these instructions carefully before use to ensure proper setup and safe operation. This monitor stand is designed to elevate your screen to an ergonomic height and provide additional storage space on your desk.
제품 특징
- 다목적 디자인: Can be configured as a single-layer or two-layer stand, suitable for monitors, laptops, printers, or gaming consoles.
- Ventilated Surface: Features a perforated platform to promote airflow and prevent device overheating.
- 안정적이고 내구성 있는 구조: Made from heavy-duty alloy steel, capable of supporting equipment up to 20 kg (44 lbs).
- 인체공학적 이점: Elevates your monitor to a comfortable viewing height, helping to improve posture and reduce neck and shoulder strain.
- 미끄럼 방지 패드: Equipped with reinforced bottom rubber pads to prevent sliding and protect your desk surface from scratches.
Image: The Suptek MST002 Monitor Stand configured as a two-layer structure, supporting a monitor and providing storage space.
Image: A laptop placed on the ventilated surface of the stand, with arrows showing air circulation to prevent overheating.
Image: Product dimensions and maximum weight capacity (20kg/44lbs) of the monitor stand.
패키지 내용
조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Monitor Stand Platforms (2 pieces for two-layer configuration)
- Support Legs/Frames (U-shaped metal frames)
- Assembly Hardware (screws, nuts)
- Assembly Tools (small spanner, Allen key)
- Anti-slip Rubber Pads
- 사용 설명서
설치 및 조립 지침
The Suptek MST002 Monitor Stand is designed for quick and easy assembly. You can configure it as a single-layer or a two-layer stand based on your needs.
- 구성 요소 풀기: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all components listed in the "Package Contents" section are present.
- Attach Support Legs to Bottom Platform (Step 1):
Align the U-shaped support legs with the pre-drilled holes on the bottom platform. Secure them using the provided screws and the small spanner. Ensure all connections are firm but do not overtighten.
Image: Step 1 of assembly, showing how to attach the bottom platform using the provided spanner.
- Attach Top Platform (Step 2 - for two-layer configuration):
If you are assembling a two-layer stand, align the top platform with the designated attachment points on the upper part of the support legs. Secure it using the provided screws and the Allen key. Ensure stability.
Image: Step 2 of assembly, demonstrating how to attach the top platform using the Allen key.
- 미끄럼 방지 패드를 부착하세요: Attach the anti-slip rubber pads to the bottom of the support legs to prevent movement and protect your desk surface.
- 최종 확인: Gently shake the assembled stand to ensure all connections are secure and the stand is stable.
작동 지침
Once assembled, the monitor stand is ready for use. Place your monitor, laptop, or other devices on the top platform. Utilize the lower shelf for storing keyboards, mice, notebooks, or other office supplies.
- 중량 용량: Do not exceed the maximum weight capacity of 20 kg (44 lbs) to ensure stability and prevent damage.
- 놓기: 넘어지지 않도록 스탠드를 평평하고 안정적인 표면에 놓으십시오.
- 인체공학적 포지셔닝: Position your monitor so that the top of the screen is at or slightly below eye level to maintain a comfortable posture.
Image: The monitor stand in use, demonstrating how it elevates a monitor for improved ergonomics and provides space for a keyboard underneath.
이미지: 전amples of the stand's versatile use with various devices such as laptops, printers, and monitors.
유지
To ensure the longevity and proper function of your Suptek MST002 Monitor Stand, follow these simple maintenance guidelines:
- 청소: 스탠드를 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 무게 분포 : Ensure weight is evenly distributed on the stand to maintain stability.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스탠드가 흔들리거나 불안정합니다. | 나사가 느슨하거나 표면이 고르지 않음. | Ensure all screws are tightened. Place the stand on a flat, level surface. |
| Desk surface is scratched. | Anti-slip pads are missing or dislodged. | Verify that all anti-slip rubber pads are correctly attached to the bottom of the support legs. |
| 조립이 어려움. | Incorrect alignment of parts. | Refer to the "Setup and Assembly Instructions" section and ensure parts are aligned correctly before tightening screws. |
명세서
- 모델: MST002
- 재료: 합금강
- 색상: 검은색
- 품목 무게: 2.4 킬로그램
- 하중 용량: 최대 20kg(44파운드)
- 레벨 수: 2 (1로 설정 가능)
- 특별 기능: Dual-height design with vented platform for heat dissipation, anti-slip pads.
- 필요한 조립: 예
보증 및 지원
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Suptek web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.