1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your CAMWAY Battery Monitor. This device is designed to accurately measure and display key battery parameters such as State of Charge (%), remaining battery capacity (up to 999AH), charge and discharge current (A), and voltage (V). It is suitable for various applications including RVs, golf carts, motorhomes, and other portable equipment.
2. 상자 안에 무엇이 들어있나요?
포장을 풀 때 모든 구성품이 들어 있는지 확인하세요.
- CAMWAY Battery Monitor Display Unit
- Base Mount & Sampler/Shunt (up to 500A current)
- 드라이버
- Red M8 Ground Wire
- 차폐 와이어
- 사용 설명서
3. 주요 특징
- All-in-one Battery Monitoring: Displays State of Charge (%), remaining battery capacity (up to 999AH), charge/discharge current (A), and voltag전자(V).
- High-definition Backlight Display: Clear visibility of parameters with a two-way detection and display function.
- 자동 절전 모드: Enters sleep mode when current is less than 50mA, with a button press to reactivate the backlight.
- 광범위한 적용 범위: Supports 8-120V batteries up to 500A, suitable for golf carts, RVs, mobile equipment, e-bikes, and more.
- 데이터 저장: Automatically saves the last testing data upon system shutdown.
- 인간화된 디자인: Touch-sensitive buttons for backlight activation and parameter switching.
- 방수 및 내구성: Designed for resilience in various environments.
4. 설정 및 설치
Proper wiring is crucial for accurate readings and safe operation. Please follow the instructions carefully.
4.1 배선 방법
The battery monitor uses a shunt for current measurement. Ensure all negative current flows through the shunt.
- s를 연결하세요ampler/shunt B- terminal to the battery pack B- terminal.
- s를 연결하세요ampler/shunt P- terminal to the P-/C- of the charger.
- Connect the shielded wire from the sampler/shunt to the display unit.
- Connect the battery B+ terminal to the P+ (output+) terminal.
중요 공지:
- Sampler/shunt must connect to the negative circuit of the battery. It is forbidden to lengthen or cut the shielded wire. The connection principle ensures that all current passes through the samp러.
- When charging, the backlight will flash. When discharging, the backlight will always be on. If B- and P- connections are reversed, this behavior will be reversed.
4.2 비디오 설치 가이드
5. 사용 설명서
5.1 Display and Button Functions
The monitor features a 1.5-inch large screen with a green backlight for clear visibility.
- 백라이트 제어: To turn off the backlight, press the left and right buttons simultaneously for 3 seconds.
- 모드 전환: Briefly touch the buttons to switch between displaying voltage (V), current (A/Ah), and State of Charge (%).
- 자동 절전: When the current is less than 50mA, the monitor automatically enters sleep mode. Press any button to wake it up.
5.2 용량 설정
To ensure accurate State of Charge readings, set the total capacity of your battery bank in Amp-시간(아).
- Access the capacity setting mode by pressing the 'A/Ah SET' button.
- Use the arrow buttons to adjust the capacity value.
- Confirm the setting by pressing the 'A/Ah SET' button again or waiting for a few seconds for it to auto-save.
6. 사양
This product is applicable for 8V~120V battery packs, such as lithium battery, lithium iron phosphate battery, lead-acid battery, nickel metal hydride batteries, etc.
| 매개변수 | 값 |
|---|---|
| 작업 볼륨tage | 8-120V |
| 작업 소비 | 10.0~12.0mA |
| 대기 소비량 | 0.5~0.6mA |
| Sleep Consumption | 50.0-60uA |
| Vol의 정확도tage 수집 | ±1.0% |
| Accuracy of Current Collecting | ±1.0% |
| Accuracy of Capacity Collecting | ±1.0% |
| Setting Value of Capacity | 0.1-999.0 아아 |
| 50A 에스ampler 현재 | 0-50.0 A |
| 100A 에스ampler 현재 | 0-100.0 A |
| 350A 에스ampler 현재 | 0-350.0 A |
| Temperature Range in Application Environment | -10 ~ 60 ° C |
| 중량(50A/100A/350A) | 200/270/410g |
| 외관 크기 | Ø59*20mm |
| 구멍 크기 | 직경 54.50mm |
| 제품 치수 | 5.89 x 5.89 x 1.98cm |
| 재료 | 플라스틱 |
7. 유지관리
To ensure the longevity and accurate performance of your CAMWAY Battery Monitor, follow these maintenance guidelines:
- 청소: Use a soft, dry cloth to clean the display and housing. Avoid abrasive cleaners or solvents that could damage the unit.
- 사이: 모든 배선 연결부를 주기적으로 점검하여 단단히 고정되어 있고 부식이 없는지 확인하십시오. 연결이 느슨하면 측정값이 부정확해지거나 장치가 오작동할 수 있습니다.
- 환경 보호: Although the unit is waterproof, avoid prolonged exposure to extreme temperatures or direct submersion in water.
8. 문제 해결
If you encounter issues with your battery monitor, refer to the following common troubleshooting steps:
- 디스플레이/전원 없음: Check all power connections to the monitor and the battery. Ensure the battery has sufficient voltage to power the unit.
- 부정확한 판독: Verify that the shunt is correctly wired in the negative circuit and that all negative loads and charge sources pass through it. Check the battery capacity setting in the monitor to ensure it matches your battery bank.
- 백라이트 문제: If the backlight is not functioning as expected, ensure the unit is not in automatic sleep mode (press any button to wake). If the issue persists, check wiring.
- 디스플레이가 얼어붙었습니다: Disconnect power to the monitor for a few seconds, then reconnect to perform a soft reset.
이러한 단계를 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.
9. 보증
The CAMWAY Battery Monitor comes with an 18개월 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation. Please retain your proof of purchase for warranty claims.
10. 고객 지원
For any questions, technical assistance, or warranty inquiries, please contact CAMWAY customer support through the retailer where the product was purchased or visit the official CAMWAY web연락처 정보 사이트.