Bernstein TWG62

Bernstein TWG62 Wall-Mounted Mineral Cast Washbasin

Model: TWG62 - White Matt, 100x46x20 cm

소개

This instruction manual provides essential information for the safe and correct installation, operation, and maintenance of your Bernstein TWG62 Wall-Mounted Mineral Cast Washbasin. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation or use may lead to damage or injury.

안전 정보

  • Always ensure the wall structure is suitable and strong enough to support the weight of the washbasin (36 kg) plus any additional load (water, items). Consult a structural engineer if unsure.
  • Installation should be performed by qualified personnel or a competent plumber.
  • 설치 작업 중에는 안전 안경과 장갑을 포함한 적절한 개인 보호 장비(PPE)를 착용하십시오.
  • 설치를 시작하기 전에 모든 물 공급 라인이 차단되어 있는지 확인하세요.
  • Handle the washbasin with care to prevent chipping or damage to the mineral cast material.
  • 어린이와 애완동물이 설치 장소에 접근하지 못하도록 하세요.

패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.

  • Bernstein TWG62 Wall-Mounted Mineral Cast Washbasin (100x46x20cm)
  • 설치용 하드웨어(나사, 벽 플러그 등)
  • 설치 템플릿(제공된 경우)

Note: Faucet, drain valve, and siphon are not included and must be purchased separately.

설정 및 설치

Follow these steps carefully for proper installation. It is recommended to have two people for lifting and positioning the washbasin 무게 때문에.

1. 준비

  • 모든 구성품을 풀어서 손상 여부를 검사하세요.
  • Determine the desired mounting height. The top edge of the washbasin is typically installed at 85-90 cm from the finished floor, but adjust according to user preference.
  • Locate and mark the positions for water supply lines and the drain pipe on the wall.
  • The faucet hole is not pre-drilled. Mark the desired position for your faucet on the washbasin and drill carefully using an appropriate drill bit for mineral cast.

2. 벽 장착

  1. Using the provided mounting template (if applicable) or by measuring directly from the washbasin, mark the drilling points for the wall mounting bolts on the wall. Ensure these marks are level.
  2. Drill holes at the marked positions using a drill bit suitable for your wall material.
  3. 뚫은 구멍에 적절한 벽면 플러그를 꽂으세요.
  4. Secure the mounting bolts or brackets (part of the included mounting hardware) into the wall plugs. Ensure they are firmly tightened.
  5. Carefully lift the washbasin and align it with the mounting bolts/brackets. Slide the washbasin onto the bolts/brackets.
  6. 세면대 고정하기asin to the wall using the remaining mounting hardware (e.g., nuts and washers). Do not overtighten, but ensure the washbasin 안정적이고 보안성이 뛰어납니다.
Technical drawing showing top, front, and side dimensions of the washbasin.

Figure 1: Technical drawing with overall dimensions (1000mm width, 460mm depth, 200mm height).

자세한 측면 view technical drawing of the washbasin showing internal structure and drain area.

그림 2: 상세 측면 view showing internal dimensions and drain channel (e.g., 92mm depth to drain).

Cross-section technical drawing of the washbasin showing the drain channel and wall mounting points.

그림 3: 단면도 view illustrating the drain channel and mounting points.

3. Faucet and Drain Installation

  1. Install your chosen faucet according to its manufacturer's instructions into the drilled hole on the washbasin.
  2. Install the drain valve and siphon according to their respective manufacturer's instructions. Ensure all connections are watertight.
  3. 급수관을 수도꼭지에 연결합니다.
  4. Turn on the main water supply and check for any leaks at all connections. Tighten as necessary.
간접비 view of the installed Bernstein TWG62 washbasin with a mirror cabinet above, showing its integrated towel rail and storage.

Figure 4: The Bernstein TWG62 washbasin installed, showcasin디자인과 기능.

작동 지침

The Bernstein TWG62 washbasin is designed for standard bathroom use. Its integrated towel rail and storage compartment provide convenient functionality.

  • Use the faucet to control water flow and temperature as usual.
  • 세탁asin features a drain channel without an overflow. Ensure the faucet is not left running unattended to prevent accidental flooding.
  • Utilize the integrated towel rail for hanging hand towels and the storage surface for bathroom essentials.

유지 보수 및 관리

To maintain the appearance and longevity of your mineral cast washbasin, 다음 관리 지침을 따르십시오.

  • 매일 청소: Clean the washbasin regularly with a soft cloth and a mild, non-abrasive liquid cleaner. Rinse thoroughly with water and dry with a soft cloth to prevent water spots.
  • 연마제를 피하세요: Do not use abrasive cleaners, scouring pads, or harsh chemicals (e.g., strong acids, ammonia-based cleaners) as these can damage the surface finish.
  • 얼룩 제거: For stubborn stains, a diluted solution of mild detergent or a specialized mineral cast cleaner can be used. Always test on an inconspicuous area first.
  • 내열성: While mineral cast is durable, avoid placing extremely hot items directly on the surface without protection.
  • 긁힘: Minor scratches on the matt surface can often be buffed out with a fine abrasive pad (e.g., Scotch-Brite white pad) and a small amount of mineral cast polishing paste, followed by thorough rinsing. Consult a professional for deeper damage.

문제 해결

문제가능한 원인해결책
연결부에서 물이 새는 경우연결 부분이 느슨하고 씰이 손상되었습니다.Tighten connections. Replace seals if damaged. Ensure plumber's tape or sealant was used correctly.
배수가 느림Partial blockage in the drain or siphon.Remove and clean the siphon. Use a drain cleaner suitable for plumbing systems if necessary.
세탁asin 불안정하다Mounting bolts/brackets not securely fastened or wall structure insufficient.Re-check all mounting hardware for tightness. Ensure wall plugs are appropriate for the wall material. If the wall is insufficient, reinforce it or consult a professional.
Surface discoloration/stainsHard water deposits, chemical residue, or prolonged contact with staining agents.Clean with a mild descaler for hard water. For other stains, use a specialized mineral cast cleaner. Avoid abrasive scrubbing.

명세서

  • 모델: TWG62
  • 상표: 번스타인 배드샵
  • 재료: Mineral Cast (Solid Stone)
  • 색상: 화이트 매트
  • 치수(폭 x 깊이 x 높이): 100 x 46 x 20cm
  • 무게: 36kg
  • 설치 유형: 벽걸이형
  • 수도꼭지 구멍: Not pre-drilled (suitable for one faucet)
  • 과다: 오버플로 없음
  • 특별 기능: Integrated towel rail, storage surface, pre-drilled holes for wall mounting, drain channel.

보증 정보

Bernstein Badshop products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims.

For detailed warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Bernstein Badshop web대지.

지원 및 연락처

If you encounter any issues or have questions regarding your Bernstein TWG62 washbasin that are not covered in this manual, please contact Bernstein Badshop customer support.

번스타인 배드샵
Visit the Bernstein Store on Amazon
Please have your model number (TWG62) and proof of purchase ready when contacting support.

© 2024 Bernstein Badshop. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.