1. 중요 안전 지침
Please read all instructions carefully before using this appliance and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- 선풍기를 청소, 수리 또는 이동하기 전에 항상 전원 콘센트에서 플러그를 뽑으십시오.
- 팬이 작동하는 동안 그릴에 손가락이나 다른 물건을 넣지 마십시오.
- 물 근처나 습기가 있는 곳에서는 선풍기를 사용하지 마십시오.amp locations such as bathrooms or laundries.
- 볼륨을 확보하세요tag정격 라벨에 표시된 e가 주 전원 공급 볼륨과 일치합니다.tage.
- 선풍기를 커튼, 블라인드 또는 선풍기 바람에 빨려 들어갈 수 있는 물체로부터 멀리 두십시오.
- 손상된 코드나 플러그로 선풍기를 작동하지 마십시오. 수리를 위해서는 자격을 갖춘 서비스 담당자에게 문의하십시오.
- 본 기기는 신체적, 감각적 또는 정신적 능력이 저하된 사람(어린이 포함)이나 경험 및 지식이 부족한 사람이 사용하도록 의도된 것이 아니며, 안전을 책임질 사람으로부터 기기 사용에 관한 감독이나 지시를 받은 경우에만 사용할 수 있습니다.
2. 제품 오버view
The Mistral MIF401R is a 16-inch Inverter Stand Fan designed for efficient and quiet cooling. It features a remote control for convenient operation, 12-speed selection, a 12-hour programmed timer, and left & right oscillation. The fan also includes a silent mode, smart memory auto-save function, LED display, and convertible height for versatile use.
2.1 포함된 구성 요소
- 1 x Inverter Stand Fan (main unit, stand, base, grille, blades)
- 1 x 원격 제어
2.2 Fan Diagram
Figure 1: Mistral MIF401R Inverter Stand Fan with remote control. Shows the fan head, adjustable stand, round base, and the remote control.
3. 설정
3.1 조립
Follow these steps to assemble your Mistral MIF401R Inverter Stand Fan:
- Unpack all components from the box and ensure all parts listed in Section 2.1 are present.
- Attach the stand pole to the base, securing it firmly with the provided screw/nut from underneath the base.
- Mount the fan head unit onto the top of the stand pole, ensuring it clicks securely into place.
- Attach the rear grille, then the fan blade, and finally the front grille, securing them with the respective nuts/clips. Refer to the detailed assembly diagram in the separate assembly guide if provided.
3.2 배치
Place the fan on a firm, level surface. Ensure there is adequate space around the fan for proper air circulation and oscillation. Avoid placing it directly against walls or near loose fabrics.
4. 사용 설명서
Plug the fan into a suitable power outlet. The fan can be operated using the control panel on the unit or the multi-function remote control.
4.1 전원 켜기/끄기
- 를 누르세요 힘 button on the control panel or remote control to turn the fan on or off.
- The LED display will illuminate when the fan is on.
4.2단 속도 선택
- 를 누르세요 속도 button repeatedly to cycle through the 12 available speed settings.
- The current speed level will be shown on the LED display.
4.3 진동 제어
- 를 누르세요 오에스씨 button to activate or deactivate the left & right oscillation function.
- The fan head will sweep from side to side when oscillation is active.
4.4 타이머 기능
- 를 누르세요 시간제 노동자 button to set the fan to automatically turn off after a specified period.
- Each press will increase the timer setting by 1 hour, up to a maximum of 12 hours. The set time will be displayed on the LED.
4.5 무음 모드
- 를 누르세요 조용한 button to activate a low-noise operation mode, ideal for sleeping or quiet environments.
- Press again to return to normal operation.
4.6 Smart Memory Auto-Save
The fan is equipped with a smart memory function that automatically saves the last used speed and oscillation settings. When the fan is turned on again, it will resume operation with these saved settings.
4.7 Convertible Height Adjustment
To adjust the fan's height, loosen the height adjustment knob on the stand pole, raise or lower the inner pole to the desired height, and then tighten the knob firmly to secure it in place.
5. 유지관리
정기적인 청소 및 유지 관리는 최적의 성능을 보장하고 선풍기의 수명을 연장시켜 줍니다.
5.1 청소
- 청소하기 전에 항상 팬의 플러그를 전원 콘센트에서 뽑으세요.
- 팬의 외부 표면을 부드러운 천으로 닦으세요.amp cloth. Do not use abrasive cleaners, waxes, or polishes as these may damage the finish.
- To clean the fan blades and inside the grilles, carefully remove the front grille (refer to assembly instructions for reverse steps). Wipe the blades and grilles with a soft, damp 천. 다시 조립하기 전에 모든 부분이 완전히 마르는지 확인하세요.
- 팬을 물에 담그거나 모터 하우징에 물이 떨어지지 않도록 하십시오.
5.2 보관
When not in use for extended periods, store the fan in its original packaging or cover it to protect it from dust. Store in a cool, dry place.
6. 문제 해결
팬에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 팬이 켜지지 않습니다. | Not plugged in, power outlet faulty, power button not pressed. | Ensure the fan is securely plugged into a working power outlet. Press the POWER button. |
| 팬이 회전하지 않습니다. | 진동 기능이 활성화되지 않았습니다. | Press the OSC button on the control panel or remote control. |
| 리모컨이 작동하지 않습니다. | Batteries depleted, remote not aimed at receiver, obstruction. | Replace remote control batteries. Ensure there is no obstruction between the remote and the fan's receiver. Aim the remote directly at the fan. |
| 팬에서 이상한 소리가 납니다. | Loose parts, obstruction in blades/grille. | Unplug the fan and check for any loose parts or obstructions. Ensure grilles are securely fastened. |
이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.
7. 사양
- 모델: MIF401R
- 유형: Inverter Stand Fan
- 크기: 16인치
- 무게: 5.9 킬로그램
- 속도 설정: 12
- 시간제 노동자: 12 Hours (programmable)
- 진동: 왼쪽 & 오른쪽
- 제어: 리모컨, 유닛 버튼
- 표시하다: 주도의
- 특별 기능: Silent Mode, Smart Memory Auto-Save, Convertible Height
- 포함된 구성 요소: 1 x Inverter Stand Fan, 1 x Remote Control
- Batteries Required (for fan unit): 아니요
8. 보증 및 지원
8.1 보증 정보
This Mistral MIF401R Inverter Stand Fan comes with a 2 Year Local Warranty. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.
8.2 고객 지원
For technical assistance, warranty claims, or any other inquiries, please contact Mistral customer support through their official web사이트 또는 구매 문서에 제공된 연락처 정보를 참조하세요.