Weiser Brentwood x Belmont Handleset Instruction Manual

1. 제품 오버view

The Weiser Brentwood x Belmont Handleset in Satin Nickel is a traditional front door lock and handle set designed for exterior doors requiring keyed entry and enhanced security. It combines a stylish handleset with a matching deadbolt, offering both aesthetic appeal and robust protection for your home.

This handleset features a crisp, clean Satin Nickel finish that complements modern home decor. The deadbolt provides a 1-inch throw for added security, and the entire unit can be locked or unlocked using a key from the outside or a key/turnpiece from the inside.

Image: Complete Weiser Brentwood x Belmont Handleset in Satin Nickel.

2. 주요 특징

• Traditional Handleset with Matching Deadbolt: Designed for exterior doors where keyed entry and security are essential. Includes a single-cylinder deadbolt with a 1-inch deadbolt throw.
• Versatile Locking: Can be locked or unlocked by a key from the outside or with a key/turnpiece from the inside.
• 간편한 설치: Installs quickly, often in minutes, with basic tools like a screwdriver. Features an adjustable latch to fit all standard door preparations.
• 스마트키 기술: Provides advanced protection against break-in techniques and allows you to re-key the lock yourself in seconds, rendering lost or unreturned keys obsolete.
• ANSI/BHMA Grade 3 Certified Deadbolt: Ensures a high standard of security and durability.

Image: SmartKey Security features diagram.

3. 패키지 포함 사항

개봉 후 다음 구성품이 모두 있는지 확인해 주십시오.

• Door Handle (Exterior Handleset)
• 레버(내부)
• Deadbolt Assembly
• 래치
• 파업
• 앨런 렌치
• 2개의 키
• 스마트키 도구

4. 설정 및 설치

The Weiser Brentwood x Belmont Handleset is designed for easy installation. While specific detailed steps are provided in the full installation guide included with your product, here are general considerations:

1. 문 준비: Ensure your door has standard preparations for a handleset and deadbolt.
2. Install Latches: Insert and secure the deadbolt latch and the handleset latch into the door edge. The adjustable latch accommodates various backsets.
3. Assemble Exterior Components: Position the exterior handleset and deadbolt cylinder.
4. 내부 구성품 설치: Attach the interior lever and deadbolt turnpiece, securing them with the provided screws.
5. 테스트 작업: Verify that both the deadbolt and handleset operate smoothly from both the interior and exterior.

Image: Handleset installed on a door.

For a step-by-step visual guide, please refer to the detailed installation instructions provided in the product packaging.

5. 사용 설명서

잠금 및 잠금 해제:

• 외부에서: Insert the key into the deadbolt cylinder and turn to lock or unlock. The handleset can be locked by the thumbturn on the exterior.
• 내부에서: Use the turnpiece on the deadbolt to lock or unlock. The interior lever operates independently for egress.

Using SmartKey Technology:

SmartKey Technology allows you to re-key your lock to a new key in seconds, providing convenience and enhanced security. This is particularly useful if you lose a key or wish to consolidate multiple locks to a single key.

1. 작동하는 열쇠를 자물쇠에 넣고 시계 방향으로 90도 돌립니다.
2. Insert the SmartKey tool fully and firmly into the SmartKey hole. Remove the SmartKey tool.
3. 작동하는 키를 제거하세요.
4. Insert your new key fully and firmly into the lock. Turn the new key 90 degrees counter-clockwise.
5. 새 열쇠를 제거하세요. 이제 자물쇠가 다시 열렸습니다.

문을 닫기 전에 새 열쇠가 제대로 작동하는지 여러 번 테스트해 보세요.

6. 유지관리

Weiser 핸들 세트의 수명과 최적의 성능을 보장하려면 다음 유지 관리 지침을 따르십시오.

• 청소: 손잡이 부분을 부드러운 천으로 정기적으로 청소하십시오.amp 천으로 닦으세요. 연마성 세제, 용제 또는 강한 화학 물질은 마감재를 손상시킬 수 있으므로 피하세요.
• 매끄럽게 하기: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and internal mechanisms to ensure smooth operation. Do not use oil-based lubricants.
• 나사를 조이세요: Check and tighten all mounting screws periodically to prevent looseness and ensure secure installation.

7. 문제 해결

If you encounter issues with your Weiser handleset, consider the following common solutions:

• Difficulty Turning Key: Ensure the key is fully inserted. Check for debris in the keyway and try lubricating it. If using SmartKey, ensure the re-keying process was completed correctly.
• Latch Not Retracting: Check for obstructions in the door frame or strike plate. Ensure the latch is properly aligned with the strike plate.
• Loose Handleset: 내부 및 외부 부품의 장착 나사를 모두 조이십시오.
• Deadbolt Not Extending Fully: Verify that the deadbolt hole in the door frame is deep enough and clear of obstructions.

If problems persist after attempting these steps, please contact Weiser customer support for further assistance.

8. 사양

9. 보증 및 지원

Weiser products are manufactured to the highest standards of quality and performance. This handleset comes with a 평생 제한 보증, covering defects in material and workmanship for the original residential user.

For detailed warranty information, claims, or technical support, please visit the official Weiser web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 더 많은 정보와 제품은 다음에서 확인하실 수 있습니다. Weiser Store on Amazon.