Amazon Basics 40W LED Outdoor Motion Sensor Security Light User Manual

소개

This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.

안전 정보

• 경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈나 회로 차단기의 전원을 분리하세요.
• 본 제품은 해당 설치 규정에 따라 제품의 구조, 작동 및 관련 위험을 잘 아는 사람이 설치해야 합니다.
• Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
• 조광 스위치에 연결하지 마십시오.
• LED 광원을 직접 쳐다보지 마십시오.
• 모든 연결 부분이 안전하고 적절히 절연되어 있는지 확인하세요.
• 작동 온도 범위: -20°C ~ 40°C (-4°F ~ 104°F).

패키지 내용

• Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
• 장착 하드웨어(나사, 와이어 너트)
• 사용 설명서

제품 특징

The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.

• 고휘도 : 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
• 동작 감지: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
• 조절 가능한 디자인: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
• 내구성 있는 구조: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
• 방수: Waterproof rating ensures resilience against rain, sleet, or snow.
• ETL 인증: Meets safety and quality standards.

이미지: 앞면 view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.

설정

Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.

1. 설치 준비:
   • Turn off power at the circuit breaker or fuse box before beginning installation.
   • 설치 표면이 안정적이며 조명기구의 무게를 지탱할 수 있는지 확인하십시오.
2. 고정장치 장착:
   • 제공된 나사를 사용하여 장착 브래킷을 정션 박스에 부착합니다.
   • Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
   • Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
3. 조명 헤드와 센서를 조정하세요:
   • Loosen the adjustment screws on the light heads and motion sensor.
   • Position the light heads to cover the desired illumination area.
   • Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
   • Tighten all adjustment screws securely.
4. 복원력 : 회로 차단기를 다시 켜세요.

Image: The security light installed on the exterior wall of a building, illuminating the area below.

작동 지침

The motion sensor has adjustable settings to customize its operation.

• 시간 설정: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
• LUX (Daylight) Setting: This dial determines the ambient light level at which the motion sensor becomes active.
  • Turn towards the "Sun" symbol for activation during both day and night.
  • Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
• 초기 전원 켜기: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.

유지

• 청소: 부드러운 천으로 조명기구를 청소하십시오.amp 천을 사용하십시오. 연마성 세제나 용제는 사용하지 마십시오. 청소하기 전에 전원이 꺼져 있는지 확인하십시오.
• 점검: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
• LED : 내장형 LED 전구는 수명이 길도록 설계되었으며 사용자가 교체할 수 없습니다.

문제 해결

명세서

보증 및 지원

For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.