소개
This manual provides essential information for the safe and effective operation and maintenance of your DEWALT D36000S 10-Inch Wet Tile Saw with Stand. Please read and understand all instructions before use to ensure proper function and to prevent injury.
The DEWALT D36000S is a high-capacity wet tile saw designed for professional tile installation. It offers a 37-inch rip cut capacity (41 inches with plunge) and an 8-1/2 inch crosscut capacity, suitable for various tile sizes including 36x36 inch tiles ripped in half, 6-inch sills, and 8x48 inch planks at a 30% offset. The integrated water tray system helps contain mess, making it suitable for indoor use. The saw and stand are designed for portability, weighing approximately 91 lbs.
안전 정보
화재, 감전, 부상의 위험을 줄이기 위해 항상 기본적인 안전 예방 조치를 준수하십시오. 작업 공간을 깨끗하고 밝게 유지하십시오. 가연성 액체, 가스 또는 먼지가 있는 폭발성 환경에서는 전동 공구를 작동하지 마십시오. 전동 공구를 작동하는 동안 어린이와 주변 사람이 접근하지 못하도록 하십시오.
전기 안전
- Ensure the power cord is compatible with the power source and is properly grounded.
- 파이프, 라디에이터, 레인지 및 냉장고와 같은 접지된 표면에 신체 접촉을 피하십시오.
- 전동 공구를 비나 습한 환경에 노출시키지 마십시오. 전동 공구에 물이 들어가면 감전 위험이 커집니다.
- 코드를 남용하지 마십시오. 코드를 사용하여 전동 공구를 운반, 당기거나 플러그를 뽑지 마십시오. 코드를 열, 오일, 날카로운 모서리 또는 움직이는 부품에서 멀리하십시오.
개인 안전
- 항상 눈 보호 장비(안전 안경이나 고글)와 청력 보호 장비를 착용하세요.
- Wear appropriate clothing. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
- 전동 공구를 작동할 때는 항상 주의를 기울이고, 작업 시 주의하고, 상식에 따라 행동하세요.
- 너무 뻗지 마세요. 항상 적절한 발판과 균형을 유지하세요.
Saw Specific Safety
- Always ensure the blade guard is in place and functioning correctly.
- Use only blades recommended for wet cutting of tile and masonry.
- Never attempt to cut material freehand. Always use the rip fence or miter guide.
- Ensure the water pump is submerged and functioning to provide adequate cooling and dust suppression during operation.
- Disconnect power before changing blades or performing any maintenance.
구성 요소
The DEWALT D36000S Wet Tile Saw includes the following components:
- D36000 Wet Tile Saw Unit
- D24001 Stand
- DW4764 Porcelain Tile Blade
- 수중 워터 펌프
- 물 팬
- Side Water Trays
- Rear Water Trays
- Cutting Cart Side Extension
- Angle/Rip Guide
- 블레이드 렌치
- 육각 렌치
설정
Proper setup is crucial for safe and accurate operation.
1. 스탠드 조립
Unfold the D24001 stand and ensure all locking mechanisms are securely engaged. Place the stand on a firm, level surface.
2. Mount the Saw to the Stand
Carefully lift the D36000 saw unit and align it with the mounting points on the stand. Secure the saw to the stand using the provided hardware. Ensure the saw is stable and does not wobble.
Figure 1: Fully assembled DEWALT D36000S Wet Tile Saw on its stand.
3. Install Water Trays and Pump
Attach the water pan, side water trays, and rear water trays to the saw unit. Ensure they are properly seated to prevent leaks. Place the submersible pump into the water pan and connect its hose to the saw's water delivery system.
그림 2: 상향식 view of the saw, illustrating the placement of the water trays for effective water management.
4. Install Blade
Ensure the saw is unplugged. Use the blade wrench to loosen the arbor nut. Install the DW4764 Porcelain Tile Blade, ensuring the rotation direction matches the arrow on the saw. Tighten the arbor nut securely.
5. Fill Water Reservoir
Fill the water pan with clean water until the submersible pump is fully submerged and the water level is adequate for operation. Regularly check and refill the water during use.
비디오 1: 오버view of the DEWALT D36000S Wet Tile Saw with Stand, demonstrating its features and setup.
작동 지침
Familiarize yourself with the saw's controls and cutting capabilities before beginning work.
1. Adjusting for Cuts
- 립컷: For straight cuts along the length of the tile, use the rip fence. The saw offers a 37-inch rip cut capacity, extendable to 41 inches with plunge cuts. The 18-inch cutting clearance to the left of the blade allows for ripping 36x36 inch tiles in half.
- Crosscuts: For cuts across the width of the tile, use the miter guide. The saw has an 8-1/2 inch crosscut capacity, ideal for 6-inch sills and 8x48 inch planks at a 30% offset.
- 마이터 컷: Adjust the miter guide for angled cuts. The saw supports various miter angles.
Figure 3: Detail of the miter adjustment lever, allowing for precise angle settings for various cuts.
2. Performing a Cut
- Place the tile firmly against the rip fence or miter guide on the cutting cart.
- Ensure the water pump is running and water is flowing to the blade.
- 톱을 켜세요. 절단을 시작하기 전에 톱날이 최대 속도에 도달하도록 하세요.
- Slowly and steadily push the cutting cart and tile through the blade. Do not force the cut.
- Maintain a firm grip on the tile throughout the cutting process.
- Once the cut is complete, turn off the saw and wait for the blade to stop before removing the tile.
Figure 4: The cutting cart lock mechanism, ensuring stability during precise cuts.
유지
Regular maintenance ensures the longevity and performance of your tile saw.
1. 청소
- After each use, disconnect the saw from power.
- Drain the water pan using the easy-to-remove plug.
- Rinse all water trays, the cutting cart, and the blade area to remove tile slurry and debris.
- Clean the submersible pump to prevent clogging.
- Wipe down all surfaces to prevent rust and buildup.
2. 블레이드 관리
- Inspect the blade for wear, damage, or dullness before each use.
- Replace worn or damaged blades promptly. Refer to the 'Install Blade' section for replacement instructions.
- 칼날이 손상되지 않도록 올바르게 보관하십시오.
3. 일반 검사
- 모든 패스너의 조임 상태를 주기적으로 점검하세요.
- 전원 코드에 손상된 흔적이 있는지 검사하십시오.
- Ensure the cutting cart slides smoothly. Lubricate if necessary with a suitable lubricant.
Figure 5: Integrated storage for accessories like wrenches and the miter guide, located beneath the saw for convenience.
문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 톱이 시작되지 않음 | 정전, 스위치 고장, 차단기 작동 | 전원 연결을 확인하고, 콘센트를 테스트하고, 차단기를 재설정하고, 스위치가 고장난 경우 서비스 센터에 문의하십시오. |
| Blade not cutting efficiently or chipping tiles | Dull or incorrect blade, insufficient water flow, feeding too fast | Replace blade, ensure pump is working and water is flowing, reduce feed rate. |
| Water not flowing to blade | Clogged pump, kinked hose, low water level | Clean pump, check hose for obstructions, refill water pan. |
| 부정확한 절단 | Loose fence/guide, worn blade, unstable setup | Tighten fence/guide, replace blade, ensure saw and stand are stable. |
명세서
Key technical specifications for the DEWALT D36000S Wet Tile Saw:
- 모델 번호: D36000S
- 전원: 코드식 전기
- 모터: 15 Amp, 1220 MWO
- 권tage: 120V
- 왓tage: 1800 와트
- 속도: 4200 RPM
- 블레이드 직경: 10 인치
- Rip Cut Capacity: 37 inches (41 inches with plunge)
- 횡단 절단 용량: 8-1/2 인치
- 정확성: 1/32 inch over 30 inches
- 품목 무게: 91 파운드
- 항목 치수(L x W x H): 36인치 길이 x 31인치 너비 x 28.75인치 높이
- 블레이드 소재: Stainless Steel (for included blade)
- 표면 추천: 도자기
- 특별 기능: Brake, Integrated storage, Water tray system
- 인증: UL
보증 및 지원
보증 정보, 서비스 또는 기술 지원에 대해서는 공식 DEWALT를 참조하십시오. web웹사이트를 방문하거나 디월트 고객 서비스 센터에 직접 문의하십시오. 보증 청구를 위해서는 구매 영수증을 증빙 자료로 보관하십시오.