1. 서론
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the RYOBI 10 inch Compound Miter Saw with LED, Model TS1346. Please read and understand all instructions before operating the saw to ensure personal safety and proper tool function. This heavy-duty miter saw is designed for precision cutting of wood materials, featuring a 14 Amp motor delivering up to 5,500 RPM and an LED Cutline Indicator for enhanced accuracy.
2. 일반 안전 정보
경고: 이 전동 공구와 함께 제공된 모든 안전 경고, 지침, 그림 및 사양을 읽으십시오. 아래에 나열된 모든 지침을 따르지 않으면 감전, 화재 및/또는 심각한 부상을 입을 수 있습니다.
- 마이터 톱을 작동할 때는 항상 보안경, 귀마개, 방진 마스크를 착용하십시오.
- 공작물이 단단히 고정되었는지 확인하십시오.amp어떠한 절단도 하기 전에 편집되었습니다.
- Keep hands and fingers away from the blade area. Never reach under the blade guard.
- Disconnect the power supply before changing blades, performing maintenance, or clearing jammed material.
- Maintain a clean and well-lit work area. Cluttered or dark areas invite accidents.
- 가연성 액체, 가스, 먼지 등 폭발 위험이 있는 환경에서는 전동 공구를 작동하지 마세요.
- 절단할 재료에 맞는 칼날을 사용하십시오.
- Never force the tool. Let the blade speed and sharpness do the work.
- 작동 전에 톱이 안정적이고 안전하게 고정되어 있는지 확인하십시오.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하십시오. 누락되거나 손상된 부품이 있는 경우 RYOBI 고객 서비스 센터로 문의하십시오.
- RYOBI 10 in. Compound Miter Saw with LED
- 24-tooth Carbide-Tipped Blade
- 블레이드 렌치
- 먼지 봉투
- 작업 Clamp
- 사용 설명서(본 문서)
4. 설정
4.1 포장 풀기 및 조립
Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Place the saw on a stable, level workbench or miter saw stand.
4.2 블레이드 설치
- 톱이 전원에서 분리되었는지 확인하세요.
- 스핀들 잠금 버튼을 눌러 칼날이 회전하는 것을 방지하세요.
- Using the provided blade wrench, loosen the arbor nut by turning it clockwise (it is reverse-threaded).
- Remove the outer blade washer and the old blade (if applicable).
- Place the new 24-tooth carbide-tipped blade onto the arbor, ensuring the teeth are pointing downwards towards the front of the saw.
- Reinstall the outer blade washer and arbor nut. Tighten the arbor nut firmly by turning it counter-clockwise while holding the spindle lock.
4.3 먼지 봉투 부착 장치
Attach the dust bag to the dust port located at the rear of the blade housing. This helps collect sawdust and maintain a cleaner work environment.
Figure 4.1: The Ryobi 10 inch Compound Miter Saw with LED, showing its overall design and key components.
5. 사용 설명서
5.1 전원 켜기 및 끄기
To turn the saw ON, press the trigger switch on the handle. To turn it OFF, release the trigger switch. The saw features a brake for quick blade stops.
5.2 Adjusting Miter Angle
To adjust the miter angle, depress the miter lock handle and rotate the turntable to the desired angle indicated on the miter scale. Release the handle to lock the angle. Common detents are provided for quick adjustments at standard angles (e.g., 0°, 15°, 22.5°, 31.6°, 45°).
5.3 Using the LED Cutline Indicator
The integrated LED projects a shadow line onto the workpiece, indicating the exact cutting path of the blade. Align your pencil mark with this shadow line for precise cuts. Ensure the LED is clean for optimal visibility.
5.4 절단하기
- 공작물을 펜스와 톱 테이블에 단단히 고정하십시오.
- Secure the workpiece with the work clamp 절단 중 움직임을 방지하기 위해.
- Lower the blade slowly into the workpiece, allowing the blade to reach full speed before engaging the material.
- Maintain a steady, controlled feed rate. Do not force the saw.
- Once the cut is complete, allow the blade to stop completely before raising the saw arm.
6. 유지관리
Regular maintenance ensures the longevity and safe operation of your miter saw. Always disconnect the saw from the power source before performing any maintenance.
6.1 청소
- After each use, clean the saw with a soft cloth to remove sawdust and debris.
- Use compressed air to clear dust from motor vents and moving parts.
- Periodically empty and clean the dust bag for efficient dust collection.
6.2 블레이드 관리
- Inspect the blade regularly for dullness, cracks, or missing teeth. Replace damaged blades immediately.
- Clean resin and pitch buildup from the blade using a blade cleaner.
6.3 윤활
The saw's internal components are factory-lubricated and generally do not require additional lubrication. Refer to the full operator's manual for specific lubrication points if necessary.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 톱이 시작되지 않음 | 전원 공급 없음; 스위치 오류; 회로 차단기 작동 | Check power cord and outlet; Contact service center; Reset circuit breaker |
| 칼날이 매끄럽게 절단되지 않음 | Dull or dirty blade; Incorrect blade for material; Improper feed rate | Replace or clean blade; Use appropriate blade; Adjust feed rate |
| 과도한 진동 | 느슨한 칼날; 손상된 칼날; 불안정한 장착 | Tighten arbor nut; Replace blade; Securely mount saw |
| LED cutline not visible | LED lens dirty; LED malfunction | Clean LED lens; Contact service center |
8. 사양
- 모델 번호:
- TS1346
- 상표:
- RYOBI
- 전원:
- 코드식 전기
- 권tage:
- 120 볼트
- 왓tage:
- 1680 와트
- 속도:
- 5500 RPM
- 블레이드 직경:
- 10 인치
- 이빨의 수:
- 24 (Carbide-Tipped)
- 특별 기능:
- Brake, Spindle Lock, LED Cutline Indicator
- Material (Handle):
- 플라스틱
- 안전 기준:
- UL safety standards
- 항목 치수(L x W x H):
- 10"L x 2"W x 10"H (Note: These dimensions typically refer to the blade, not the full saw. Refer to manufacturer's full specifications for tool dimensions.)
9. 보증 및 지원
The RYOBI 10 in. Compound Miter Saw with LED is backed by the RYOBI 3-Year Manufacturer's Warranty. For warranty claims, technical support, or to order replacement parts, please contact RYOBI customer service or visit their official web해당 사이트에서 구매하세요. 보증을 위해 구매 영수증을 구매 증빙 자료로 보관하십시오.
EU 예비 부품 공급 기간: 3년
더 자세한 도움을 받으시려면 RYOBI 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 고객 지원 센터에 문의하세요.