소개
This manual provides detailed instructions for the Transformers Studio Series 66 Leader Class Constructicon Overload action figure. This figure is inspired by the iconic movie scenes from Transformers: Revenge of the Fallen and is designed with specific details to reflect the Transformers movie universe. Constructicon Overload is an 8.5-inch collectible figure that converts between robot and articulated dump truck modes.
The figure is also a component of the larger Constructicon Devastator assembly. Please read all instructions carefully before handling the product.
안전 정보
경고: 질식 위험 – 작은 부품이 발생할 수 있습니다. 3세 미만 어린이는 사용하지 마십시오.
이 제품의 권장 연령은 8세 이상입니다.
상자 안에 무엇이 들어있나요?
패키지에는 다음 항목이 포함되어 있어야 합니다.
- 1x Constructicon Overload Action Figure
- 1x Detailed Accessory
- 1x Removable Backdrop (for display)
- 1x 지침서(이 문서)
설정 및 변환
The Constructicon Overload figure can convert between two primary modes: Robot Mode and Articulated Dump Truck Mode. The transformation process involves 34 steps. Refer to the visual guides and video below for assistance.
로봇 모드
In Robot Mode, Constructicon Overload stands at 8.5 inches tall. This mode features high articulation, allowing for various poses. The included accessory can be attached to the figure in this mode.
Articulated Dump Truck Mode
To convert the figure into its Articulated Dump Truck Mode, carefully follow the 34-step transformation sequence. Ensure all panels and joints are securely tabbed into place to form a cohesive vehicle. This mode is designed to resemble the character's appearance as a dump truck.
Transformation Video Guide
Official video demonstrating the transformation of the Transformers Studio Series Leader Overload figure between robot and vehicle modes.
For a visual walkthrough of the transformation, please refer to the embedded video. Pay close attention to the sequence and ensure all parts are aligned correctly to prevent damage.
작동 지침
인물의 자세 잡기
The Constructicon Overload figure features multiple points of articulation. Carefully manipulate the joints to achieve desired poses. Avoid excessive force, as this may damage the figure.
Combining with Devastator
Constructicon Overload is designed to combine with other Constructicon figures from the Studio Series to form the larger Constructicon Devastator. This figure typically forms the abdomen section of Devastator. Refer to the individual instruction manuals of the other Constructicon figures for their specific transformation and combination steps. Ensure all connection points are secure when combining figures.
The removable backdrop included with the figure can be used to display Constructicon Overload in the Pyramid Desert Battle scene, enhancing your display options.
유지
- 청소: 부드럽고 마른 천으로 피규어의 먼지를 부드럽게 닦아주세요. 강한 화학 물질이나 연마재는 페인트나 플라스틱을 손상시킬 수 있으므로 사용하지 마세요.
- 저장: 피규어의 변색이나 변형을 방지하기 위해 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
- 손질: Always handle the figure by its main body parts. Avoid pulling or twisting small, delicate components with excessive force.
문제 해결
- 변형의 어려움: If you encounter resistance during transformation, do not force the parts. Re-examine the instruction steps and the transformation video to ensure correct alignment. Sometimes, a specific panel needs to be moved or rotated before another can articulate.
- 느슨한 관절: Over time, some joints may become slightly loose. This is common with articulated figures. For minor looseness, a small amount of clear nail polish or a specialized joint tightener can be applied to the joint and allowed to dry, but proceed with caution.
- 탭이 표시되지 않는 부품: Ensure all tabs and slots are correctly aligned. Sometimes, a slight adjustment to an adjacent part is needed for a tab to fully engage.
명세서
- 제품 크기: 4.02 x 9.25 x 10.98 인치
- 품목 무게: 1.15파운드
- 모델 번호: E7217
- 제조업체 권장 연령: 8세 이상
- 출시일: 28년 2020월 XNUMX일
- 제조업체: 하스브로
보증 및 지원
For information regarding product warranty or technical support, please refer to the official Hasbro web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.
공식 트랜스포머 Web대지: Visit the Transformers Store