Weiser SmartCode 10 Traditional Z-Wave Electronic Lock (Model 9GED18000-028) User Manual

제품 끝view

The Weiser SmartCode 10 Traditional with Z-Wave Electronics is a robust electronic deadbolt designed for residential security. It integrates seamlessly with Z-Wave compatible home automation systems, offering enhanced control and convenience. This lock features a durable metal housing and the innovative SmartKey re-key technology.

주요 특징:

• Electronic keypad operation with backlit numbers for night visibility.
• Manual key override for traditional access.
• Z-Wave 500 technology for wireless communication with security and home automation systems.
• Compatible with Amazon Alexa via Samsung SmartThings and/or Wink.
• SmartKey re-key technology allows re-keying the lock in seconds.
• Customizable automatic door locking after 30 seconds for peace of mind.
• Supports up to 30 user access codes and 1 master code.
• ANSI/BHMA Grade 2 certified and UL certified with a 20-minute fire rating.
• Designed for easy installation on most standard residential doors with just a screwdriver.

Image: Weiser SmartCode 10 Traditional Z-Wave Electronic Lock, showcasing the exterior keypad and brass finish.

설정 및 설치

The Weiser SmartCode 10 lock is designed for straightforward installation, typically requiring only a screwdriver. Follow these general steps for a successful setup:

1. 문을 준비하세요

• Ensure your door is prepared for a standard deadbolt installation.
• Remove any existing deadbolt hardware.

2. 래치 설치

• Insert the latch into the edge of the door. Ensure the latch bolt is facing the correct direction (beveled edge towards the door frame).
• 제공된 나사를 사용하여 걸쇠를 고정하십시오.

3. 외부 어셈블리 설치

• Feed the cable and spindle through the hole in the door.
• Position the exterior keypad assembly flush against the door.

4. 내부 장착판을 설치합니다.

• 내부 장착판을 외부 조립체와 정렬하여 문에 부착합니다.
• Secure it with screws, ensuring the cable is routed correctly and not pinched.

5. Connect the Cable and Install Interior Assembly

• 외부 어셈블리의 케이블을 내부 어셈블리에 연결합니다.
• Attach the interior assembly to the mounting plate, ensuring the spindle engages with the turnpiece.
• Secure the interior assembly with screws.

6. 배터리 삽입

• The lock requires 4 AA batteries (purchased separately).
• Open the battery cover on the interior assembly and insert the batteries, observing polarity.
• 배터리 덮개를 닫습니다.

7. Program User Codes

• Refer to the detailed programming instructions included with your lock to set your master code and individual user access codes.

8. SmartKey Re-keying (Optional)

• If you wish to re-key your lock to an existing Weiser key, use the SmartKey re-key tool and follow the instructions provided. This process takes seconds and requires three easy steps.

Operating Your SmartCode 10 Lock

문 잠그기

• 외부에서: Press the "Lock" button on the keypad once. The deadbolt will extend automatically.
• 인테리어에서: Turn the interior turnpiece to the vertical (locked) position.
• 자동 잠금: The lock can be configured to automatically lock after 30 seconds of inactivity, providing added security.

문 잠금 해제

• 사용자 코드 사용: Enter your valid 4-8 digit user code on the keypad. The deadbolt will retract.
• 키 사용: 실제 열쇠를 열쇠 구멍에 넣고 돌려서 데드볼트를 잠금 해제합니다.
• Z-Wave 통합: If connected to a compatible Z-Wave system (e.g., Samsung SmartThings, Wink), you can lock/unlock the door remotely via your smartphone or smart home interface.

Z-Wave Connectivity

The SmartCode 10 lock features Z-Wave technology, allowing it to communicate wirelessly with your home automation system. This enables remote control, status monitoring, and integration with other smart devices. Consult your Z-Wave hub's instructions for pairing the lock with your system.

유지

배터리 교체

• The lock will provide a low battery warning (e.g., flashing light, audible beep).
• To replace batteries, remove the interior cover.
• Replace the 4 AA batteries with new alkaline batteries, ensuring correct polarity.
• Reattach the interior cover.

청소

• 부드러운 천으로 잠금장치 외부를 청소하세요.amp 천을 사용하십시오. 마감재나 키패드를 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마십시오.

문제 해결

• 잠금이 응답하지 않음: Check battery levels and replace if necessary. Ensure the interior assembly is properly seated.
• 잘못된 코드 입력: If the lock flashes red or beeps negatively after entering a code, re-enter the code carefully. Verify the code is active.
• Mechanism Lag: In rare instances, the locking mechanism may lag. Ensure the door is properly aligned and the strike plate is correctly installed. If issues persist, re-calibrate the lock or contact support.
• Z-Wave 연결 문제: Ensure your Z-Wave hub is powered on and within range. Re-attempt the pairing process if necessary.

명세서

보증 및 지원

보증 정보

The Weiser SmartCode 10 Traditional Z-Wave Electronic Lock comes with a 평생 기계 및 마감 보증, ensuring the durability and appearance of your lock. Additionally, it includes a One-Year Electronics Warranty covering any electronic components.

For specific warranty claims or details, please refer to the warranty documentation included with your product or visit the official Weiser web대지.

고객 지원

If you encounter any issues or have questions regarding your Weiser SmartCode 10 lock, please consult the comprehensive user guide provided in the product packaging. For further assistance, you may contact Weiser customer support through their official web현장 또는 지정된 지원 채널.