XVIM H.264 2MP Wireless Security Camera System User Manual

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your XVIM H.264 2MP Wireless Security Camera System. This system includes a 4-channel 1080p HD Network Video Recorder (NVR) with a pre-installed 1TB Hard Disk Drive (HDD) and four 1080p wireless cameras designed for both outdoor and indoor use. Please read this manual thoroughly before setting up and using your system to ensure proper functionality and safety.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요. 품목이 누락되었거나 손상된 경우 고객 지원팀에 문의하세요.

• 1 x H.264 Network DVR (NVR)
• 4 x 1080p Wireless Cameras
• 1TB 하드 디스크 드라이브 1개 (NVR에 사전 설치됨)
• NVR용 전원 공급 장치 1개
• 4 x Power Supplies for Cameras
• 1 x USB 마우스
• 8 x Screws for camera mounting

그림 1: 위에view of the system components included in the package, showing the NVR, four cameras, power adapters, USB mouse, and mounting screws.

설정

The XVIM wireless security system is designed for easy setup. The cameras and NVR are pre-paired at the factory, allowing for a plug-and-play experience.

1. NVR 연결

1. Connect the NVR to a power outlet using the provided power supply.
2. Connect the NVR to a monitor or TV using an HDMI or VGA cable (cables not included).
3. Connect the provided USB mouse to a USB port on the NVR.
4. 원격용 viewing and network features, connect the NVR to your router using an Ethernet cable (not included).

그림 2: 뒤쪽 view of the NVR showing ports for VGA, HDMI, Network (Ethernet), USB, and Power. A 1TB hard drive is also depicted.

2. Camera Power and Placement

1. Connect each wireless camera to a power outlet using its dedicated power supply.
2. Position the cameras in desired monitoring locations. Ensure they are within range of the NVR's wireless signal.
3. Mount cameras securely using the provided screws. The cameras are IP66 waterproof, suitable for outdoor installation.

그림 3: An XVIM wireless camera installed outdoors, demonstrating its waterproof design and adjustable screw for positioning. The image highlights its night vision capabilities.

그림 4: The complete XVIM security system, showing the NVR unit and four wireless cameras with their antennas, indicating wireless connectivity.

작동 지침

1. System Power On

Once the NVR and all cameras are connected to power, the system will automatically boot up. The cameras will connect wirelessly to the NVR. You should see live video feeds on the connected monitor.

2. 라이브 View녹음 및 녹음

The NVR provides a live view of all connected cameras. The 1TB HDD allows for continuous 24/7 recording. You can navigate the NVR interface using the USB mouse to view recordings, adjust settings, and manage storage.

3. Mobile Application Live View잉

에게 view your cameras remotely on Android or iOS devices:

1. Download the "XVR Pro" app from the App Store (iOS) or Google Play Store (Android), or scan the QR code provided in the NVR's on-screen menu.
2. Follow the in-app instructions to add your NVR system. Ensure your NVR is connected to the internet via an Ethernet cable.
3. 연결되면 다음을 수행할 수 있습니다. view 모바일 기기에서 실시간 영상 시청, 녹화 영상 재생, 설정 관리 등을 할 수 있습니다.

그림 5: A smartphone screen showing live video feeds from the security cameras, demonstrating remote viewing capability via the mobile application.

4. 동작 감지 및 알림

The system supports motion detection, which can trigger recording and send email alerts. You can configure these settings via the NVR interface:

• Access the NVR's menu using the USB mouse.
• Navigate to the motion detection settings.
• Define detection zones and adjust sensitivity levels for each camera to minimize false alarms.
• Configure email settings to receive alerts with video screenshots when motion is detected.

그림 6: An illustration of the system's alarm message feature, showing a notification on a mobile device and an email icon, indicating alerts for detected motion.

5. Night Vision and Wide View잉 각도

The cameras are equipped with 24 LEDs and an automatic IR-cut filter, providing clear night vision up to 100 feet. They also feature an 81-degree wide view더 넓은 영역을 커버하기 위해 각도를 조절합니다.

그림 7: A close-up of an XVIM camera highlighting its 81-degree wide viewing angle and capabilities for night vision and weatherproof operation.

유지

Regular maintenance helps ensure optimal performance and longevity of your security system.

• 카메라 청소: Periodically clean the camera lenses with a soft, dry cloth to remove dust, dirt, or water spots that may affect image clarity.
• 케이블 검사: Check all power and network cables for any signs of wear, damage, or loose connections.
• 펌웨어 업데이트: 제조사 확인해보세요 website for any available firmware updates for the NVR and cameras to ensure the system has the latest features and security patches.
• 하드디스크 관리: While the 1TB HDD provides ample storage, regularly review recordings and back up important footage as needed. The system typically overwrites the oldest footag디스크 용량이 가득 찼을 때.

문제 해결

This section addresses common issues you might encounter with your XVIM security system.

No Video Feed on Monitor

• Ensure the NVR is powered on and its power adapter is securely connected.
• Verify that the monitor is powered on and correctly connected to the NVR via HDMI or VGA.
• Check if the correct input source is selected on your monitor (e.g., HDMI1, VGA).

Cameras Not Connecting / No Image

• Confirm that each camera is powered on and its power adapter is securely connected.
• Ensure cameras are within the wireless range of the NVR. Obstacles like thick walls can reduce signal strength.
• If a camera loses connection, try power cycling both the camera and the NVR.
• Although pre-paired, if issues persist, refer to the NVR's on-screen menu for options to re-add or re-pair cameras.

원격 Viewing Not Working on Mobile App

• NVR이 이더넷 케이블을 통해 라우터에 연결되어 있고 인터넷에 접속할 수 있는지 확인하세요.
• Verify your mobile device has a stable internet connection (Wi-Fi or cellular data).
• Confirm that the NVR has been correctly added to the "XVR Pro" app. Double-check the device ID or QR code.
• Check firewall settings on your router; some ports may need to be opened for remote access. Consult your router's manual or ISP.

Motion Detection Alerts Not Received

• Ensure motion detection is enabled for the relevant cameras in the NVR settings.
• Verify that email settings are correctly configured in the NVR, including sender and recipient addresses, SMTP server, and port.
• 이메일의 스팸 또는 정크 폴더를 확인하세요.
• Adjust motion detection sensitivity and detection zones to ensure events are being triggered.

명세서

보증 및 지원

For warranty information, technical support, or further assistance, please refer to the official XVIM website or contact their customer service directly. Details for contacting support are typically found on the product packaging or the manufacturer's web대지.