스타 마이크로닉스 39651110
스타 마이크로닉스 mC-Print3 열전사 POS 프린터 사용 설명서
모델: 39651110
1. 서론
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Star Micronics mC-Print3 3-inch Ethernet (LAN) / USB / Lightning Thermal POS Printer. Designed for efficiency and reliability, the mC-Print3 is a compact and fast thermal printer suitable for various point-of-sale environments.
The mC-Print3 features a printing speed of 250 mm/sec and incorporates Print-Flat Technology for consistent receipt quality. It offers extensive software compatibility across Windows, iOS, Android, web, and cloud platforms. Connectivity options include USB and Ethernet LAN, with advanced features like CloudPRNT and a peripheral hub. Its splash-proof enclosure ensures durability in demanding settings.
2. 안전 정보
Please read all safety instructions carefully before operating the printer. Failure to do so may result in injury or damage to the device.
- Ensure the printer is connected to a power source that matches the specified voltag요구사항
- Do not expose the printer to excessive moisture or extreme temperatures. The splash-proof design offers protection against splashes, but it is not fully waterproof.
- 과열을 방지하려면 환기구를 막지 마십시오.
- 프린터를 직접 분해하거나 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
- Use only recommended paper types and sizes to prevent paper jams and ensure optimal print quality.
- 종이 절단기 작동 중에는 손을 절단기에서 멀리하십시오.
3. 상자 안에 무엇이 들어있나요?
Upon unboxing your Star Micronics mC-Print3 printer, verify that all the following items are included:
- mC-Print3 Printer
- Test Paper Roll
- USB 케이블
- 전원 공급 장치
4. 설정
4.1. 물리적 설정
Before connecting the printer, ensure it is placed on a stable, flat surface.
4.2. 용지 넣기
The mC-Print3 features a convenient front-loading paper mechanism.
- 프린터의 앞면 덮개를 엽니다.
- Insert the thermal paper roll, ensuring the paper feeds from the bottom of the roll.
- Pull a small amount of paper past the cutter and close the cover firmly until it clicks.
4.3. 케이블 연결하기
The mC-Print3 offers multiple connectivity options. Connect the power supply and your chosen interface cable (USB or Ethernet LAN) to the rear of the printer. The printer also features a peripheral hub for connecting other POS devices.
4.4. 소프트웨어 및 드라이버 설치
The mC-Print3 supports a wide range of operating systems including Windows, iOS, Android, web, and cloud environments. Drivers and SDKs are available from the Star Micronics website to facilitate integration with your POS system.
For iOS devices, the unique SteadyLAN™ technology allows for internet connection to the tablet via the USB cable, eliminating the need for Wi-Fi or Bluetooth for network access.
Video 4.1: This video demonstrates the SteadyLAN technology, showing how an iPad can receive internet connectivity and power directly through the printer's USB connection, simplifying POS setup.
5. 사용 설명서
5.1. 기본 인쇄
Once connected and configured with your POS software, the printer will automatically receive print commands. The mC-Print3's fast printing speed of 250 mm/sec ensures quick transaction processing.
5.2. Peripheral Hub Functionality
The integrated peripheral hub allows you to connect various devices such as barcode scanners, customer displays, and RFID readers directly to the printer, streamlining your POS setup.
Video 5.1: This video highlights the mC-Print series' compact design and superior connectivity, including the peripheral hub that supports various POS devices like customer displays and barcode scanners.
6. 유지관리
6.1. 프린터 청소
정기적으로 청소하면 인쇄 품질을 유지하고 프린터의 수명을 연장하는 데 도움이 됩니다.
- 청소하기 전에 프린터 전원을 끄고 전원 케이블을 분리하십시오.
- 부드럽고 보풀이 없는 천을 사용하십시오. dampened with a mild, non-abrasive cleaner to wipe the exterior.
- For the thermal print head and platen roller, use an alcohol-based cleaning pen or a cotton swab lightly damp이소프로필 알코올로 마무리하십시오. 사용 전에 완전히 건조시키십시오.
6.2. 용지 롤 교체
Replace the paper roll as described in Section 4.2 when the paper low sensor is activated or print quality degrades.
7. 문제 해결
This section addresses common issues you might encounter with your mC-Print3 printer.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 프린터 전원이 켜지지 않습니다 | 전원 케이블이 분리되었습니다. 전원 공급 장치에 문제가 있습니다. | Check power connections; try a different outlet; replace power supply if necessary. |
| 출력 없음 | Paper jam; out of paper; incorrect driver/software settings; connectivity issue. | Clear paper jam and reload paper; install correct drivers; verify USB/Ethernet connection. |
| 인쇄 품질이 좋지 않음 | Dirty print head; incorrect paper type; worn-out print head. | Clean the print head; ensure correct thermal paper is used; contact support if print head is worn. |
| Paper getting stuck/hole in receipt | Paper not loaded correctly; internal mechanism issue. | Ensure paper is loaded straight and cover is closed properly. If issue persists, contact Star Micronics support. |
8. 사양
- 모델 이름: MC-Print3
- 제품 크기: 5.5 x 5.25 x 5 인치
- 품목 무게: 2.8 파운드
- 인쇄 기술: 열의
- 최대 인쇄 속도: 250 mm/sec (Monochrome)
- 연결 기술 : Wired Connectivity (USB, Ethernet LAN)
- 색상: 검은색
- 제조업체: Star Micronics America, Inc
- 특징: Ethernet, Peripheral Hub, CloudPRNT, SteadyLAN™
9. 보증 및 지원
The Star Micronics mC-Print3 printer typically comes with a manufacturer's limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Star Micronics web대지.
기술 지원, 드라이버 다운로드 및 기타 자료는 다음 웹사이트를 방문하십시오. Star Micronics Store on Amazon 또는 공식 지원 포털을 이용하세요.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.