LD Systems ICOA 15 A BT
LD Systems ICOA 15 A BT 15인치 액티브 동축 PA 스피커(블루투스 기능 포함) 사용 설명서
Model: ICOA 15 A BT
1. 서론
This manual provides detailed instructions for the safe and effective use of your LD Systems ICOA 15 A BT 15 Inch Active Coaxial PA Speaker with Bluetooth. Please read this manual thoroughly before operating the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
2. 제품 오버view 및 주요 특징
The LD Systems ICOA 15 A BT is a versatile active coaxial PA loudspeaker designed for various applications, including full-range sound reinforcement, satellite use, and stage monitoring. It features a coaxial design with a rotating, BEM-optimized CD horn and integrated DynX DSP technology for optimal sound performance.
주요 특징:
- Versatile design for full-range, satellite, and monitor applications.
- High maximum SPL of 128 dB and 1200 W peak power.
- Coaxial design with a rotating, BEM-optimized CD horn for vertical and horizontal use.
- Horn-loaded woofer for enhanced bass reproduction.
- Integrated DynX DSP with 4 presets, 3-band EQ, and delay function for sound optimization.
- 무선 오디오 스트리밍을 위한 블루투스 연결 기능.
- Two line/mic input channels with individual gain control and mono mix output.
- Shock-resistant front grille and 55° tilt angle for floor monitor use.
- 36 mm dual tilt stand attachment for 0 or 5-degree tilt angles.
3. 설정 가이드
3.1 풀기 및 검사
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage during transit. If damage is found, contact your dealer immediately.
3.2 배치 옵션
The ICOA 15 A BT offers flexible placement:
- Vertical Pole Mounting: Use the 36 mm dual tilt stand attachment for optimal sound dispersion. Choose between 0 or 5-degree tilt.
- Horizontal Floor Monitor: The 55° tilt angle allows for effective use as a stag전자 모니터.
- Suspended Systems: Suitable for installation in suspended configurations.
Figure 1: LD Systems ICOA 15 A BT speaker in a vertical setup.
Figure 2: LD Systems ICOA 15 A BT speaker positioned as a floor monitor.
3.3 연결
Refer to the control panel diagram for input and output connections.
Figure 3: Rear control panel of the ICOA 15 A BT speaker.
- 전원 연결: Connect the supplied power cable to the IEC inlet on the rear panel and to a suitable AC power outlet.
- Input 1 & 2 (Line/Mic): Use XLR or 1/4" TRS cables to connect audio sources such as microphones, mixers, or instruments. Adjust individual gain controls as needed.
- AUX 입력 : Connect additional audio devices via the AUX input.
- SYSTEM OUT: Use this XLR output to link multiple speakers or send the mixed signal to another audio device.
4. 사용 설명서
4.1 전원 켜기/끄기
Ensure all connections are secure before powering on. Use the power switch located on the rear panel to turn the speaker on or off.
4.2 볼륨 조절
The main volume knob controls the overall output level. Individual gain controls are available for Input 1 and Input 2.
4.3 블루투스 페어링
- Activate Bluetooth on your playback device (smartphone, tablet, etc.).
- On the ICOA 15 A BT, navigate to the Bluetooth pairing menu using the main volume knob (push for menu).
- Select "Pair Device" or similar option. The speaker will become discoverable.
- Select "LD Systems ICOA 15 A BT" from your device's Bluetooth list.
- Once paired, audio from your device will stream wirelessly to the speaker.
4.4 DynX DSP Presets and EQ
The integrated DynX DSP offers 4 presets, a 3-band EQ, and a delay function to optimize sound for different environments and applications.
- 사전 설정 : Access and select from the available presets (e.g., Full-Range, Satellite, Monitor) via the menu.
- 3밴드 EQ: Adjust Bass, Mid, and Treble frequencies to fine-tune the sound.
- 지연 기능: Use the delay setting to synchronize sound in multi-speaker setups.
5. 유지관리
- 청소: 부드럽고 마른 천을 사용하여 스피커 외부를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
- 저장: 사용하지 않을 때는 스피커를 건조하고 먼지 없는 곳에 보관하십시오.
- 수송: Use appropriate covers or cases to protect the speaker during transport. The ergonomic aluminum handles facilitate carrying.
- 통풍: Ensure proper ventilation around the speaker to prevent overheating. Do not block ventilation openings.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 사운드 출력이 없습니다 | Power not connected; Volume too low; Input source not connected or faulty; Incorrect input selected. | Check power cable and switch; Increase main volume and input gain; Verify input cable connections; Select correct input source. |
| 왜곡된 소리 | 입력 신호가 너무 높음(클리핑); 스피커 과부하; EQ 설정이 잘못됨. | Reduce input gain from source or speaker; Lower main volume; Adjust EQ settings. |
| 블루투스가 페어링되지 않습니다 | 스피커가 페어링 모드가 아닙니다. 기기가 너무 멀리 떨어져 있습니다. 간섭이 발생합니다. 기기가 이미 다른 스피커와 페어링되어 있습니다. | Ensure speaker is in Bluetooth pairing mode; Move device closer; Reduce interference; Disconnect from other devices. |
| 스피커 전원이 켜지지 않음 | Power cable disconnected; Power outlet faulty; Internal fuse blown. | Check power cable connection; Test power outlet with another device; Contact qualified service personnel for fuse replacement. |
7. 기술 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | ICOA 15 A BT |
| 스피커 유형 | 동축 모니터 |
| 스피커 크기 | 15 인치 |
| 우퍼 직경 | 381 밀리미터 |
| 스피커 최대 출력 전력 | 1200와트(최대) |
| Upper Frequency Response | 20,000 Hz (Note: Features horn-loaded woofer for enhanced bass reproduction) |
| 연결 기술 | 블루투스, 동축 |
| 무선 통신 기술 | 블루투스 |
| 제어 방법 | Touch (via display/knob) |
| 전원 | 코드식 전기 |
| 제품 크기(D x W x H) | 16인치 깊이 x 16인치 너비 x 27인치 높이 |
| 품목 무게 | 62.5파운드 |
| 포함된 구성 요소 | 15" Powered Coaxial PA Loudspeaker with Bluetooth |
| 장착 유형 | Tabletop Mount, Pole Mount |
| 제조업체 | LD 시스템 |
| 첫 번째 이용 가능 날짜 | 5년 2019월 XNUMX일 |
Figure 4: Product dimensions of the ICOA 15 A BT speaker.
8. 보증 정보
이 제품에는 다음이 포함되어 있습니다. 한정 보증. For specific terms, conditions, and duration of the warranty, please refer to the warranty card included with your product or visit the official LD Systems web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
9. 지원 및 연락처
For technical support, service, or further inquiries regarding your LD Systems ICOA 15 A BT speaker, please visit the official LD Systems web사이트 또는 고객 서비스 부서에 문의하세요. 연락처 정보는 일반적으로 제조업체의 web사이트 또는 제품 포장.
LD Systems Official Web대지: www.ld-systems.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.