소개
The Fms 2000mm Beaver V2 is a 6-channel remote control airplane designed for an immersive and enjoyable flight experience. This manual provides essential information for assembly, operation, and maintenance to ensure safe and optimal performance of your aircraft.
Image: The Fms 2000mm Beaver V2 RC Plane, an attractive red scheme aircraft with optional floats.
- Realistic Flight Experience: Features an eye-catching red color scheme, transparent windows, and a realistic cockpit design for an immersive flying experience.
- 뛰어난 성과: Offers excellent controllability and STOL (Short Takeoff and Landing) capabilities, suitable for both training and aerobatic maneuvers.
- 향상된 플레이 편의성: Equipped with realistic ailerons, flaps, hollow wing structure, landing lights, navigation lights, and strobe lights for lifelike night flights. Optional floats and a glider tow hook increase versatility.
- 완전히 새로워진 업그레이드: Newly designed wheels with ball bearings reduce rolling resistance and withstand tough landing conditions. Oversized tires ensure stable operation on various terrains.
- Convenient Transportation Design: Quick-release connector system for wings and fuselage simplifies storage and transportation.
설정 및 조립
Follow these steps to assemble your Fms 2000mm Beaver V2 RC Plane. This model is a Plug and Play (PNP) version, meaning it comes with the ESC, motor, and servos pre-installed. You will need to provide your own 6-channel receiver, Li-Po 22.2V 4000mAh battery, and a compatible charger.
- Purchase a 6-channel receiver, a Li-Po 22.2V 4000mAh battery, and a compatible charger.
- Connect the receiver to the plane's control surfaces.
- Install the battery in the oversized battery bay.
- Assemble the plane by screwing together the wings and fuselage.
- The plane is now ready to fly.
이미지: 상세 view of the wing and fuselage connectors, which eliminate the need for individual servo leads, and the robust metal landing gear designed for durability.
Image: Close-up of the pre-installed LED landing, navigation, and strobe lights, along with the realistic flaps for enhanced slow-speed performance.
작동 지침
The Fms 2000mm Beaver V2 is designed for ease of control and offers stable flight characteristics. Familiarize yourself with the controls before your first flight.
- 비행 전 점검: Ensure all control surfaces (ailerons, elevator, rudder) move freely and correctly in response to your transmitter inputs. Check battery charge and secure installation.
- 이륙하다: For ground takeoffs, ensure a flat surface. Apply throttle gradually and use rudder for directional control. For hand launches, hold the aircraft firmly, apply full throttle, and gently toss it forward into the wind.
- 비행 제어:
- 에일러론: Control roll (left/right banking).
- 엘리베이터: 기수(코)의 높이(위/아래)를 조절합니다.
- 키: Controls yaw (nose left/right) and steering on the ground.
- 조절판: 모터 속도와 고도를 제어합니다.
- 플랩 : Use flaps for slower flight speeds during takeoff and landing.
- 착륙: Approach into the wind. Reduce throttle gradually and use elevator to maintain a gentle descent. Apply a small amount of throttle (around 10%) to maintain propeller rotation and control, rather than cutting it completely, to avoid a sudden dive. Flare gently just above the ground to achieve a smooth touchdown.
Video: FMS 2000mm DH-2 Beaver V2 - Features and Flight. This video demonstrates the aircraft's flight characteristics and key features, including takeoff, maneuvers, and landing.
유지
Regular maintenance ensures the longevity and safe operation of your Fms 2000mm Beaver V2.
- 비행 후 점검: After each flight, inspect the aircraft for any damage, loose connections, or worn parts. Check the propeller for cracks or chips.
- 청소: Clean the aircraft body with a soft, dry cloth. Avoid using harsh chemicals that may damage the foam material.
- 배터리 관리 : Always store Li-Po batteries at a storage charge (around 3.8V per cell) when not in use for extended periods. Do not overcharge or over-discharge batteries.
- 조종면 점검: Periodically check the hinges and linkages of all control surfaces for wear or looseness. Ensure servos operate smoothly.
- 착륙 장치: Inspect the landing gear for any bends or damage, especially after rough landings. The newly designed wheels with ball bearings are built to withstand tough conditions, but regular checks are still recommended.
문제 해결
다음은 몇 가지 일반적인 문제와 이에 대한 잠재적 해결책입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 항공기가 조종 장치에 반응하지 않습니다. | Unbound receiver, low transmitter/receiver battery, incorrect wiring. | Ensure receiver is bound to transmitter. Check and charge all batteries. Verify all connections are secure. |
| 모터가 회전하지 않습니다. | Disconnected motor/ESC, low battery, ESC not armed. | Check motor and ESC connections. Ensure battery is charged. Follow ESC arming procedure (usually throttle to minimum, then advance). |
| Aircraft pulls to one side during takeoff. | Incorrect trim settings, bent landing gear, uneven thrust. | Adjust trim on transmitter. Inspect landing gear for damage. Check propeller balance. |
| 짧은 비행 시간. | 배터리가 완전히 충전되지 않았거나, 배터리가 오래되었거나 손상되었거나, 비행이 과격한 경우. | Ensure battery is fully charged. Replace old batteries. Practice smoother throttle management. |
명세서
Key technical specifications for the Fms 2000mm Beaver V2 RC Plane:
Image: Detailed specifications table for the Fms 2000mm Beaver V2.
- 브랜드 이름: 에프엠에스
- 모델 이름: Beaver V2
- 모델 번호: FMM090P1X
- 날개 길이: 2000mm(78인치)
- 전체 길이: 1304mm
- 비행 무게 : ~3800g
- 모터 크기 : 4285-550KV
- 키보드: 60A
- 서보 기구: 17g*6
- 라디오: 6 Channel (required, not included)
- CG (Center of Gravity): 70-75mm
- 소품 크기: 15*9, 2개의 블레이드
- 추천 배터리: 22.2V 4000MAH 25C (required, not included)
- Approx. Flying Duration: 8 분
- 경험 수준: 중급
- 조립 시간: 10 분
- 날개 하중: 71.1g/d㎡
- 날개 면적: 53.4dm²
- 재료 유형: 거품
- 포함된 구성 요소: Motor, Speed Controller, Servos
- 배터리가 필요한가요? 예(포함되지 않음)
- 조립이 필요합니까: 예
보증 및 지원
For any issues or support, please refer to the following information:
- 반품 정책: This product is eligible for a 30-day refund/replacement return policy.
- Damaged During Shipping: If your package was damaged during shipping, please contact customer support immediately. Have photos of the damaged product and box ready.
- Incorrect Product Received: If you received the wrong product, keep all packing material and original boxes. The incorrect item will need to be returned (FMS will cover return shipping costs), and the correct item will be shipped once the new, unused product is returned.
- 연락하다: 추가 지원이 필요하면 다음을 방문하세요. Fms Store on Amazon 또는 제품 포장에 제공된 연락처 정보를 참조하세요.