Volteck Lait REF-903L 50W LED 투광등(모션 센서 포함) 사용 설명서

1. 서론

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Volteck Lait REF-903L 50W LED Floodlight with Motion Sensor. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. 안전 정보

경고: 감전 위험이 있습니다. 설치는 자격을 갖춘 전기 기술자가 수행해야 합니다.

• 설치나 정비를 하기 전에 회로 차단기에서 전원이 분리되었는지 확인하세요.
• 제품을 개조하지 마십시오. 개조는 보증을 무효화하고 안전상의 위험을 초래할 수 있습니다.
• This product is designed for outdoor use. Ensure all connections are waterproofed and sealed appropriately.
• LED 조명이 켜져 있을 때 직접 쳐다보지 마십시오. 눈 손상을 유발할 수 있습니다.
• 포장재료를 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 제품 오버view

The Volteck Lait REF-903L is a high-intensity 50W LED floodlight equipped with a motion sensor, designed for efficient and automatic illumination of wide areas. Its robust construction ensures durability in various weather conditions.

특징:

• Aluminum body and weather-resistant tempered glass screen.
• High-intensity LED for wide area illumination with low energy consumption.
• SMD type LEDs.
• Adjustable bracket for flexible positioning.
• Integrated motion sensor for automatic activation.

구성 요소:

The following image illustrates the main components of the Volteck Lait REF-903L floodlight:

일반 view of the product is shown below:

제품 시연:

Watch this video for a 360-degree view of the Volteck Lait REF-903L LED Floodlight with Motion Sensor:

4. 사양

The following table details the technical specifications of the Volteck Lait REF-903L LED Floodlight:

치수:

The physical dimensions of the floodlight are detailed in the image below:

침투 방지(IP) 등급:

The floodlight has an IP65 rating, indicating its resistance to dust and water. The breakdown of the IP rating is as follows:

5. 설정 및 설치

설치를 시작하기 전에 2절의 안전 정보를 읽고 이해했는지 확인하십시오.

5.1 Mounting the Floodlight:

1. Choose a suitable surface for mounting, such as a wall or eave, ensuring it can support the weight of the floodlight.
2. Use the adjustable bracket to mark the drilling points on the mounting surface.
3. Drill holes and insert appropriate wall anchors (not included, depending on surface type).
4. Secure the floodlight bracket to the surface using screws.
5. Adjust the angle of the floodlight to direct illumination as desired.

5.2 전기 배선:

IMPORTANT: Disconnect power at the main circuit breaker before wiring.

1. Identify the live, neutral, and ground wires from your electrical supply.
2. Connect the floodlight's wires to the corresponding electrical supply wires. Typically:
   • Brown/Black wire to Live (L)
   • 파란색 전선을 중성선(N)에 연결
   • Green/Yellow wire to Ground (GND)
3. Ensure all connections are secure and insulated with waterproof connectors suitable for outdoor use.
4. Restore power at the circuit breaker after completing all connections.

5.3 Adjusting the Motion Sensor:

The motion sensor typically has adjustable settings for sensitivity (detection range), time (how long the light stays on after motion is detected), and lux (ambient light level at which the sensor becomes active). Refer to the sensor unit for specific adjustment dials or buttons.

6. 사용 설명서

Once installed and powered, the Volteck Lait REF-903L floodlight operates automatically based on its motion sensor settings.

동작 감지 센서 작동:

• The motion sensor detects movement within its specified range and angle.
• When motion is detected and the ambient light level is below the set lux threshold, the floodlight will turn on.
• The light will remain on for the duration set by the 'TIME' adjustment dial.
• If motion is continuously detected, the light will remain on until motion ceases and the timer expires.

Observe the motion sensor in action:

7. 유지관리

Regular maintenance helps ensure the longevity and optimal performance of your floodlight.

• 청소: Periodically clean the glass screen and motion sensor lens with a soft, damp cloth to remove dirt, dust, or debris that may obstruct light output or sensor function. Do not use abrasive cleaners.
• 점검: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure all seals remain intact to maintain weather resistance.
• LED : The LEDs are designed for long life and are not user-replaceable. If the LEDs fail, the entire unit should be replaced.

8. 문제 해결

If you encounter issues with your Volteck Lait REF-903L floodlight, refer to the following common problems and solutions:

9. 보증 및 지원

보증 정보:

This Volteck Lait REF-903L LED Floodlight is covered by a 3-year warranty against manufacturing defects. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

고객 지원:

For technical assistance, warranty claims, or further inquiries, please contact Volteck customer support through their official website or the retailer where the product was purchased. Provide your product model number (REF-903L) and a detailed description of the issue.