Bearware B081HCF7WR

Bearware Digital Thermostat Plug (Model B081HCF7WR) Instruction Manual

1. 서론

1.1개 제품 이상view

The Bearware Digital Thermostat Plug is designed for temperature-controlled switching of heating and cooling appliances. It allows you to set a desired room temperature, and the device will automatically turn connected appliances on or off to maintain that temperature. This programmable thermostat is suitable for use with various electric heaters, air conditioners, and other temperature-sensitive devices.

1.2 주요 특징

  • 온도 조절: Regulates temperature between 1°C and 45°C with an accuracy of ±0.5°C.
  • 대형 LCD 디스플레이: Features a clear 5 cm LCD for easy reading of time, temperature, and mode settings.
  • 프로그래밍 가능: Offers flexible programming options for daily schedules and temperature settings.
  • Anti-frost Function: Automatically activates heating if the room temperature drops below 2°C to prevent freezing.
  • 듀얼 모드: Supports both heating and cooling modes.
  • 간편한 조작: Simple button interface for setting time, temperature, and programs.

1.3 패키지 내용

  • Bearware Digital Thermostat Plug
  • 사용 설명서

2. 안전 지침

Please read these safety instructions carefully before using the device. Failure to follow these instructions may result in electric shock, fire, or injury.

  • 이 장치는 실내에서만 사용하세요.
  • Do not expose the device to moisture, direct sunlight, or extreme temperatures.
  • 기기가 접지된 콘센트에 제대로 꽂혀 있는지 확인하십시오.
  • 콘센트에 과부하가 걸리지 않도록 하십시오.
  • 기기를 직접 분해하거나 수리하려고 하지 마십시오. 서비스를 받으려면 자격을 갖춘 기술자에게 문의하십시오.
  • 어린이의 손이 닿지 않는 곳에 보관하세요.
  • 청소하기 전에 전원 콘센트에서 장치의 플러그를 뽑으십시오.

3. 제품 구성품

Familiarize yourself with the components of your Bearware Digital Thermostat Plug:

앞쪽 view of the Bearware Digital Thermostat Plug, showing the display and control buttons.

그림 1: 앞쪽 view of the Bearware Digital Thermostat Plug, showing the display and control buttons. The display shows current time, day, room temperature, and set temperature. Buttons include Power, Set, OK, Up, and Down.

  • LCD 디스플레이: Shows current time, day, room temperature, set temperature, and operating mode icons.
  • 전원 버튼(⏻): 장치를 켜거나 끕니다.
  • 설정 버튼: Enters programming mode and confirms selections.
  • 확인 버튼: Confirms settings during programming.
  • 위쪽 화살표 버튼(▲): 값을 늘리거나 메뉴를 탐색합니다.
  • 아래쪽 화살표 버튼(▼): 값을 감소시키거나 메뉴를 탐색합니다.
  • 통합 소켓: For connecting your heating or cooling appliance.

4. 설정 및 초기 구성

4.1 초기 전원 켜기

  1. Plug the Bearware Digital Thermostat Plug into a standard wall outlet.
  2. The display will light up, and the device will be in standby mode or show default settings.

4.2 시간 및 요일 설정

To ensure accurate scheduling, set the current time and day:

Quick start guide diagram for the Bearware Digital Thermostat Plug, illustrating time setting, mode selection, and timer programming.

그림 2: Quick start guide diagram showing steps for time setting, heating/cooling mode selection, manual temperature setting, and timer programming.

  1. 를 누르고 계세요 세트 button for approximately 3 seconds until the clock symbol on the display starts blinking.
  2. 사용하세요 위쪽 화살표(▲) or 아래쪽 화살표(▼) 분을 조정하려면 버튼을 누르세요. OK 확인합니다.
  3. The hour display will start blinking. Use the 위쪽 화살표(▲) or 아래쪽 화살표(▼) buttons to adjust the hours. Press OK 확인합니다.
  4. The day of the week will start blinking. Use the 위쪽 화살표(▲) or 아래쪽 화살표(▼) buttons to select the current day. Press OK 확인합니다.
  5. The device will automatically exit the time setting menu after a few seconds, or you can briefly press the 힘 (⏻) 종료하려면 버튼을 클릭하세요.

5. 작동 모드

5.1 Heating and Cooling Mode Selection

The thermostat can operate in either heating or cooling mode. By default, the device is set to heating mode.

  1. 를 누르고 계세요 위쪽 화살표(▲) button for approximately 3 seconds to enter the basic settings menu.
  2. 사용하세요 위쪽 화살표(▲) or 아래쪽 화살표(▼) buttons to toggle between the heating mode (indicated by a 열 icon, typically a flame) and cooling mode (indicated by a 시원한 icon, typically a snowflake).
  3. After 5 seconds of inactivity, the setting will be saved, and the device will return to the main display.
  4. In 난방 모드, the connected appliance will turn on if the room temperature is below the set target temperature.
  5. In 냉각 모드, the connected appliance will turn on if the room temperature is above the set target temperature.

5.2 수동 온도 조절

To set a specific target temperature manually:

  1. 짧게 누르세요 세트 button until the manual mode icon (a hand with an index finger) appears on the display.
  2. 사용하세요 위쪽 화살표(▲) or 아래쪽 화살표(▼) 원하는 목표 온도를 조절하는 버튼입니다.
  3. The connected heating or cooling appliance will switch on or off according to the selected mode and the newly set temperature.
  4. To exit manual mode, briefly press the 세트 버튼을 다시 누르세요.

5.3 Programmable Timer Mode (ON/OFF Times)

You can program specific ON and OFF times for your connected appliance:

  1. 를 누르고 계세요 세트 button for approximately 3 seconds to enter the time setting menu.
  2. 를 누르세요 세트 button once briefly to activate the ON time setting. The 'ON' symbol will blink.
  3. 사용하세요 위쪽 화살표(▲) or 아래쪽 화살표(▼) buttons to set the desired ON hour, then press OK.
  4. 사용하세요 위쪽 화살표(▲) or 아래쪽 화살표(▼) buttons to set the desired ON minute, then press OK.
  5. 를 누르세요 세트 button twice briefly to activate the OFF time setting. The 'OFF' symbol will blink.
  6. 사용하세요 위쪽 화살표(▲) or 아래쪽 화살표(▼) buttons to set the desired OFF hour, then press OK.
  7. 사용하세요 위쪽 화살표(▲) or 아래쪽 화살표(▼) buttons to set the desired OFF minute, then press OK.
  8. The device will automatically save the settings and exit the menu after a few seconds.

5.4 Anti-frost Function

The thermostat includes an anti-frost function to protect your space from freezing temperatures. If the room temperature drops below 2°C, the device will automatically activate the connected heating appliance to raise the temperature above the freezing point, preventing damage from cold.

6. 유지관리

6.1 청소

  1. 청소하기 전에는 항상 기기의 플러그를 전원 콘센트에서 뽑아두세요.
  2. Wipe the exterior of the thermostat with a soft, dry cloth.
  3. 연마성 세척제, 용제 또는 독한 화학 물질은 표면을 손상시킬 수 있으므로 사용하지 마십시오.
  4. 기기에 액체가 들어가지 않도록 하십시오.

6.2 보관

If storing the device for an extended period, unplug it and store it in a cool, dry place away from direct sunlight and extreme temperatures.

7. 문제 해결

If you encounter issues with your Bearware Digital Thermostat Plug, refer to the following common problems and solutions:

  • 디스플레이 없음:
    • Ensure the thermostat is securely plugged into a working power outlet.
    • Check if the power outlet itself is functional by plugging in another device.
  • 잘못된 온도 측정:
    • Ensure the thermostat is not placed near heat sources (e.g., direct sunlight, appliances) or cold drafts, which can affect its sensor.
    • Allow some time for the sensor to stabilize after initial plug-in or relocation.
  • Appliance Not Switching On/Off:
    • Verify that the thermostat is in the correct operating mode (heating or cooling) for your appliance.
    • Check that the set target temperature is appropriate for the desired action (e.g., for heating, set temperature higher than room temperature).
    • Ensure the connected appliance is switched on and functioning correctly.
    • Review your programmed ON/OFF times if using timer mode.
  • 버튼이 응답하지 않음:
    • Try unplugging the device from the wall outlet for a few seconds and then plugging it back in to reset it.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.

8. 기술 사양

Dimensional drawing of the Bearware Digital Thermostat Plug, illustrating its length, width, and depth.

그림 3: Dimensions of the Bearware Digital Thermostat Plug, showing measurements in millimeters.

  • 모델 번호: B081HCF7WR
  • 전원 공급 장치: 200-240 V ~ AC / 50 Hz
  • 최대 부하: 16아
  • 조절 가능한 온도 범위: 1°C - 45°C
  • 온도 조종 정확도: ±1°C (as per specifications, A+ content states ±0.5°C)
  • 온도 센서: 엔티씨씨
  • Self-Consumption Power: 1.3와트
  • 입력: 1x Type E plug
  • 산출: 1x Type F female socket
  • 플러그 유형: EU (Euro)
  • 표시하다: 5 cm (2 inch) LCD
  • 치수(길이 x 너비 x 높이): 약 14×3×8 cm
  • 무게: 약 246g
  • 색상: 하얀색

9. 보증 및 지원

보증 정보 또는 기술 지원이 필요하시면 제품 포장을 참조하시거나 제조사에 직접 문의하십시오. 구매 영수증은 구매 증빙 자료로 보관해 주십시오.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.