Perel EDIN305N Digital Weekly Timer User Manual

소개

The Perel EDIN305N is a 230V 16A 3600W DIN-rail mount digital weekly timer designed for indoor use. This device allows for precise, programmable control of electrical circuits, enabling automatic switching ON and OFF of connected appliances or lighting systems over a weekly cycle. It features a clear digital display and multiple programming options to suit various scheduling needs.

안전 예방 조치

경고: Electrical installation should only be performed by a qualified electrician. Incorrect wiring can lead to electric shock, fire, or damage to the device and connected equipment. Always disconnect power at the main circuit breaker before installation or maintenance.

• Ensure the power supply matches the device's specifications (230V~50Hz).
• 최대 부하 용량인 16A/3600W를 초과하지 마십시오.
• This device is designed for indoor use only. Avoid exposure to moisture, dust, or extreme temperatures.
• 기기를 직접 열거나 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

제품 끝view

The Perel EDIN305N digital timer consists of a main body with a digital display, control buttons, and terminal blocks for electrical connections. A transparent cover protects the display and buttons.

그림 1: 앞쪽 view of the Perel EDIN305N Digital Weekly Timer. The image displays the LCD screen, control buttons (R, W+, H+, M+, C+, Clock, Manual, RES/RCL), and numbered terminal blocks (1, 2 at the top, 3, 4, 5 at the bottom).

제어 버튼:

• R: Reset button (recessed).
• W+: Weekday setting.
• H+: 시간 설정.
• 남+: Minute setting.
• C+: Clear program.
• 시계 아이콘: Used to set current time and day, and to exit programming mode.
• 수동: Manual override for ON/AUTO/OFF modes.
• RES/RCL: Reset/Recall program.

터미널 블록:

• 1, 2 : Power supply input (N, L).
• 3, 4, 5 : Output terminals for controlled circuit (Common, Normally Open, Normally Closed).

기술 사양

설치

1. 장착

The Perel EDIN305N is designed for DIN-rail mounting. Securely attach the timer to a standard 35mm DIN-rail within an electrical enclosure. Ensure sufficient space for wiring and ventilation.

2. 배선

중요한: Ensure power is disconnected at the main circuit breaker before proceeding with wiring. Follow local electrical codes and regulations.

그림 2: 옆 view of the Perel EDIN305N Digital Weekly Timer showing the electrical wiring diagram. It illustrates connections for Neutral (N), Live (L), and the output contacts (1, 2, 3, 4, 5) for controlling a load.

Refer to the wiring diagram (Figure 2) and the terminal block labels on the device:

• Connect the Neutral (N) wire of your 230V AC supply to terminal 1.
• Connect the Live (L) wire of your 230V AC supply to terminal 2.
• For the controlled circuit:
  • Terminal 3: Common contact for the relay output.
  • Terminal 4: Normally Open (NO) contact. The circuit connected here will be ON when the timer is active.
  • Terminal 5: Normally Closed (NC) contact. The circuit connected here will be OFF when the timer is active.
• Connect the load (e.g., light, appliance) between the Live (L) supply and either terminal 4 (for NO operation) or terminal 5 (for NC operation), with terminal 3 connected to the Live (L) supply. Alternatively, connect the load between terminal 4 or 5 and the Neutral (N) supply, with terminal 3 connected to the Live (L) supply. Consult a qualified electrician for specific load wiring configurations.

초기 설정 및 작동

1. Power On and Reset

After wiring and restoring power, the display will illuminate. If the display is blank or shows erratic characters, press the recessed R (Reset) button using a pointed non-metallic object (e.g., a pen tip). This will clear all settings and restore default values.

2. 현재 시간 및 요일 설정

1. 를 누르고 계세요 시계 아이콘 단추.
2. 를 잡고 있는 동안 시계 아이콘 버튼을 누르고 W+ to set the current day of the week (1=Monday, 7=Sunday).
3. 를 잡고 있는 동안 시계 아이콘 버튼을 누르고 H+ 현재 시간을 설정합니다(0-23).
4. 를 잡고 있는 동안 시계 아이콘 버튼을 누르고 M+ 현재 분(0-59)을 설정합니다.
5. 릴리스하다 시계 아이콘 버튼을 누르세요. 이제 시간과 날짜가 설정되었습니다.

3. 켜짐/꺼짐 주기 프로그래밍

이 타이머는 최대 7개의 켜짐/꺼짐 프로그램을 지원합니다. 각 프로그램은 켜짐 시간과 꺼짐 시간으로 구성됩니다.

1. 를 누르세요 시계 아이콘 button once to enter programming mode. The display will show "1 ON".
2. 누르다 W+ 이 프로그램에 참여할 날짜를 선택하세요. 하루만 선택하거나, 여러 날(예: 월요일~금요일)을 묶어서 선택하거나, 모든 날짜를 선택할 수 있습니다.
3. 누르다 H+ to set the ON hour for program 1.
4. 누르다 M+ to set the ON minute for program 1.
5. 를 누르세요 시계 아이콘 버튼을 다시 누르십시오. 디스플레이에 "1 OFF"가 표시됩니다.
6. Repeat steps 2-4 to set the OFF day(s), hour, and minute for program 1.
7. To set additional programs (2-7), press the 시계 아이콘 button to cycle through "2 ON", "2 OFF", etc., and repeat the setting process.
8. 원하는 프로그램을 모두 설정한 후, 수동 프로그래밍 모드를 종료하고 현재 시간 표시로 돌아가려면 이 버튼을 누르십시오.

4. 수동 조작

를 누르세요 수동 버튼을 반복해서 누르면 작동 모드가 순환됩니다.

• 에: 출력이 지속적으로 켜져 있어 모든 프로그램을 무시합니다.
• 자동 : The timer operates according to the programmed ON/OFF cycles.
• OFF : 출력은 모든 프로그램을 무시하고 지속적으로 꺼져 있습니다.

타이머가 설정되어 있는지 확인하세요 자동차 프로그램된 작동을 위해.

5. Clearing Programs

특정 프로그램을 완료하려면:

1. 버튼을 눌러 프로그래밍 모드로 진입하세요. 시계 아이콘 button until the desired program number (e.g., "3 ON") is displayed.
2. 를 누르세요 C+ button. This will clear both the ON and OFF times for that specific program.
3. Repeat for other programs as needed.
4. 누르다 수동 프로그래밍 모드를 종료합니다.

To clear all programs and reset the device, use the recessed R (Reset) button.

유지

• 부드럽고 마른 천으로 기기를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
• Ensure the transparent cover is closed to protect the display and buttons from dust and splashes.
• Regularly check electrical connections for tightness, especially in high-vibration environments.

문제 해결

처분

Do not dispose of this product with general household waste. This electronic device contains materials that can be recycled. Please dispose of it at a designated collection point for electrical and electronic equipment waste, in accordance with local regulations.

보증 및 지원

Perel products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your local Perel distributor or retailer. Please have your model number (EDIN305N) and purchase details ready when contacting support.