JLab Play Gaming Wireless Earbuds Instruction Manual

소개

The JLab Play Gaming Wireless Earbuds are designed for an immersive gaming experience across mobile and console platforms. Featuring Bluetooth 5 with 60ms super-low latency, a built-in microphone with quick mute, and an included AUX console cord, these earbuds offer versatile connectivity and clear audio for both solo play and team communication.

무엇이 포함됩니까?

• JLab Play Gaming Wireless Earbuds
• 여행 가방
• AUX 콘솔 코드(3.5mm)
• 마이크로 USB 충전 케이블
• 최적의 착용감을 위한 다양한 크기의 실리콘 이어팁

Image: JLab Play Gaming Wireless Earbuds, Micro USB charging cable, 3.5mm AUX console cord, travel bag, and various ear tip sizes.

설치 가이드

1. 초기 충전

Before first use, fully charge your JLab Play Gaming Wireless Earbuds. Connect the provided Micro USB charging cable to the charging port on the earbuds and to a USB power source. The indicator light will show charging status.

Rapid Charge Feature: 10 minutes of charging provides over 1 hour of playtime.

2. Bluetooth Pairing (Mobile Devices)

1. 이어폰의 전원이 꺼져 있는지 확인하세요.
2. Press and hold the power button on the earbuds for approximately 10 seconds until the indicator light flashes red and blue. This indicates pairing mode.
3. On your mobile device (iOS or Android), navigate to the Bluetooth settings.
4. Select "JLab Play Earbuds" from the list of available devices.
5. Once connected, the indicator light on the earbuds will turn solid blue.

3. Console Connection (Wired)

For console gaming (Xbox, PlayStation, Nintendo Switch), use the included 3.5mm AUX console cord.

1. Locate the 3.5mm audio jack on your gaming console controller or device.
2. Plug one end of the AUX console cord into the earbuds' 3.5mm port.
3. Plug the other end of the AUX console cord into your console controller or device.
4. Ensure the microphone mute switch on the AUX cord is in the 'on' position if you intend to use voice chat.

Image: JLab Play Gaming Wireless Earbuds shown with the AUX console cord, illustrating wired connection capability.

작동 지침

1. 컨트롤

The earbuds feature an in-line remote with buttons for various functions:

• 전원 켜기/끄기: 메인 버튼을 길게 누르세요.
• 재생/일시 중지: 메인 버튼을 한 번 누르세요.
• 전화 받기/종료: Single press the main button during an incoming call.
• 수신 전화 거부: 메인 버튼을 2초간 누르세요.
• 볼륨 업: '+' 버튼을 한 번 누르세요.
• 볼륨 작게 : '-' 버튼을 한 번 누르세요.
• 앞으로 추적: '+' 버튼을 2초간 길게 누르세요.
• 뒤로 추적 : '-' 버튼을 2초간 누르세요.
• Switch Gaming/Music EQ: Press and hold both '+' and '-' buttons for 2 seconds to cycle between Gaming and Music sound modes.

2. 마이크 사용

The earbuds include a built-in microphone for voice communication. When using the AUX console cord, a dedicated mute switch is available on the cord for quick control.

• 마이크 켜짐: Ensure the switch on the AUX console cord is in the 'on' position.
• Microphone Off (Mute): Slide the switch on the AUX console cord to the 'off' position.

Image: A user engaged in mobile gaming while wearing the JLab Play Gaming Wireless Earbuds, highlighting their use for portable entertainment.

유지

1. 청소

• 실리콘 이어팁은 부드러운 천으로 정기적으로 닦아주세요.amp 옷감.
• Gently wipe the earbuds and cables with a dry, soft cloth to remove dust and debris.
• 청소 시 독한 화학물질이나 연마재를 사용하지 마십시오.

2. 보관

• When not in use, store the earbuds in the provided travel bag to protect them from damage.
• The magnetic earbuds can be clicked together to prevent tangling when worn around the neck or stored.
• 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.

Image: The JLab Play Gaming Wireless Earbuds with their magnetic earpieces connected, demonstrating a convenient storage method.

문제 해결

1. Earbuds Not Pairing via Bluetooth

• 이어버드가 완전히 충전되었는지 확인하세요.
• Confirm the earbuds are in pairing mode (flashing red and blue light).
• 기기의 Bluetooth를 껐다가 켜세요.
• Forget/delete "JLab Play Earbuds" from your device's Bluetooth list and attempt to re-pair.
• 이어버드를 기기에 더 가까이 대세요.

2. 소리가 나지 않거나 소리가 작음

• 이어버드와 연결된 기기의 볼륨 레벨을 모두 확인하세요.
• Ensure the earbuds are properly connected (Bluetooth or AUX).
• If using AUX, ensure the cable is fully inserted into both the earbuds and the device.
• Try switching between Gaming and Music EQ modes.

3. 마이크가 작동하지 않음

• If using the AUX console cord, verify the microphone mute switch is in the 'on' position.
• Ensure your device's microphone settings are configured to use the JLab Play Earbuds.
• 다른 애플리케이션이나 장치로 마이크를 테스트해 보세요.

명세서

보증 정보

The JLab Play Gaming Wireless Earbuds come with a JLab 2년 보증. For detailed terms and conditions, please refer to the official JLab web사이트를 방문하거나 고객 지원팀에 문의하세요.

고객 지원

For further assistance, troubleshooting, or warranty claims, please visit the official JLab support page:

JLab 지원 방문

또한 해당 페이지에서 유용한 자료와 FAQ를 찾아보실 수 있습니다. web대지.