소개
Thank you for choosing the MOUNTUP MU0008 Tilting TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure a secure and optimal viewing experience. If you have any questions or require assistance, please contact our customer support.
안전 정보
경고: Failure to read and follow these instructions may result in personal injury, property damage, or voiding your warranty. This product is designed for installation by qualified personnel only. If you do not understand these instructions or have doubts about the safety of the installation, please consult a qualified installer.
- Do not install this product on drywall alone. It must be mounted to wood studs, solid concrete, or brick walls.
- 설치 표면이 마운트와 텔레비전의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- 최대 중량 용량은 132파운드(60kg)를 초과하지 마십시오.
- Use only the hardware provided or specified by MOUNTUP.
- Always check for electrical wires, water pipes, and gas lines in the wall before drilling.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
- 거치대가 안전하게 고정되어 있는지, 모든 고정 장치가 단단히 조여져 있는지 주기적으로 확인하십시오.
제품 끝view
The MOUNTUP MU0008 is a tilting TV wall mount designed for flat screen and curved TVs ranging from 37 to 82 inches. It offers a low-profile design, sitting just 1.5 inches from the wall, while providing a 0° to -10° downward tilt for glare reduction and optimal view각도를 나타냅니다.
주요 특징
- 보편적 인 호환성 : Supports most 37-82 inch flat or curved TVs up to 132 lbs (60 kg).
- VESA 규정 준수: Fits VESA mounting patterns from 100x100mm to 600x400mm.
- 공간 절약형 디자인: Mounts TV just 1.5 inches from the wall for a sleek appearance.
- 조정 가능한 기울기: Allows downward tilt of 0° to -10° to reduce glare and improve view주고받음.
- 견고한 구조: Made from solid steel for strong and stable support.
- 간편한 설치: Features a two-piece frame assembly and a locking system for quick setup.
- Wide Stud Spacing: Designed for wood studs up to 24 inches apart.
명세서
| 모델 번호 | 무크 녹스 |
| 화면 크기 호환성 | 37~82인치 |
| 중량 용량 | 132파운드(60kg) |
| VESA 호환성 | 100x100mm, 200x200mm, 200x300mm, 300x200mm, 300x300mm, 400x300mm, 400x200mm, 400x400mm, 600x400mm |
| 장착 유형 | 벽걸이형 |
| 이동 유형 | Tilt (0° to -10° downward) |
| 찬성file 벽에서 | 1.5인치 |
| 재료 | 금속 |
| 색상 | 검은색 |
| 벽 유형 호환성 | Wood studs (up to 24"), Solid concrete, Brick (anchors required for concrete/brick). Not for drywall alone. |
패키지 내용
Please verify that all components are present and undamaged before installation. If any parts are missing or damaged, please contact MOUNTUP customer service.
- 벽판 조립체
- TV 브래킷 (2개)
- Hardware Kit (various screws, spacers, washers, concrete anchors)
- 사용 설명서
Note: M8x45mm TV screws are not included in the standard package but can be provided upon request if needed for your TV model.
설치 지침
Follow these steps carefully for a safe and secure installation.
설치 전 확인 사항
- TV의 VESA 패턴을 확인하세요: Ensure your TV's VESA pattern (mounting holes on the back) falls within 100x100mm to 600x400mm.
- TV 무게를 확인하세요: Confirm your TV weighs no more than 132 lbs (60 kg).
- 벽 유형 식별: Determine if your wall is wood stud, solid concrete, or brick. This mount is not for drywall alone.
단계별 설치
1. TV 브래킷을 TV에 부착하세요
Carefully place your TV face down on a soft, clean surface. Attach the two vertical TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened. The hooks on the brackets should face upwards.
Image: TV with vertical mounting brackets attached.
2. Assemble and Position Wall Plate
The wall plate comes in two pieces for easier handling and wider stud compatibility. Assemble the two pieces using the provided screws. Determine the desired height and horizontal position for your TV. Use a stud finder to locate wood studs if applicable. Mark the drilling locations on the wall.
Image: Two-piece frame assembly for the wall plate.
Image: Wall plate dimensions and stud compatibility for easy TV centering.
3. 벽면 플레이트를 벽에 부착합니다.
Drill pilot holes at the marked locations. For wood stud installation, use the lag bolts directly. For concrete or brick walls, insert the concrete anchors into the pilot holes before securing the lag bolts. Ensure the wall plate is level before tightening all bolts securely.
Video: Official MOUNTUP MU0008 TV Wall Mount Installation Video. This video demonstrates the step-by-step process of attaching the wall plate to the wall, including considerations for different wall types.
Image: Compatible wall types for installation, highlighting the need for anchors in brick and concrete.
4. 벽걸이판에 TV를 걸어주세요
With assistance, carefully lift the TV and hook the TV brackets onto the top edge of the wall plate. Gently lower the TV until the brackets are fully seated on the wall plate. Ensure the TV is centered and stable.
Image: Easy installation process, showing the TV being mounted onto the wall plate.
5. TV를 벽면 고정판에 고정하세요.
Locate the safety locking pull straps at the bottom of the TV brackets. Pull these straps downwards to engage the locking mechanism, securing the TV to the wall plate. This prevents accidental dislodgement.
Image: Handy locking system for easy and secure attachment.
Image: Anti-drop edges design to prevent the TV from sliding off.
작업
기울기 각도 조정
The MOUNTUP MU0008 allows for a downward tilt adjustment of 0° to -10°. To adjust the tilt, loosen the tilt adjustment knobs located on the side of the TV brackets. Tilt the TV to your desired angle, then tighten the knobs to secure the position. This feature helps reduce glare from windows or lights.
Image: Anti-glare design with 0° to -10° tilt capability.
Image: Demonstrating how tilting the TV reduces glare.
