Prolink PRO901ES 1000VA/900W Online UPS Instruction Manual

1. 서론

The Prolink PRO901ES is a 1000VA/900W Pure Sine Wave Online Uninterruptible Power Supply (UPS) designed to provide reliable power backup and protection for critical electronic equipment. This UPS features true double-conversion technology, ensuring a consistent and clean power supply. It is suitable for various applications including data centers, medical equipment, office workstations, ATMs, and kiosk machines.

Figure 1: Prolink PRO901ES 1000VA/900W Online UPS, Tower Type.

2. 제품 오버view

2.1 주요 특징

• True Double-Conversion Online Technology: 입력 전압 변동에 관계없이 일관되고 고품질의 교류 전원을 제공합니다.
• 순수 사인파 출력: Ensures compatibility with sensitive electronic equipment.
• 높은 입력 역률 보정: 효율성을 향상시키고 전체적인 전력 손실을 줄입니다.
• Programmable Power Management Outlets: Allows for flexible control over connected devices.
• 비상 전원 차단(EPO) 기능: Provides an immediate shutdown mechanism for safety.
• 고급 권tage 규정(AVR): 출력 볼륨을 조절합니다tage within 1% tolerance, protecting devices from voltage spikes or sags.
• 모니터링 기능: Status can be monitored via the LCD display or PC programs.

2.2 후면 패널 설명

The rear panel of the PRO901ES UPS features essential connection ports for power input, output, and communication.

Figure 2: Rear Panel Layout of PRO901ES.

1. AC 입력: 무정전 전원 공급 장치를 주 전원 공급 장치에 연결합니다.
2. 입력 회로 차단기: 입력단에 과전류 보호 기능을 제공합니다.
3. USB 통신 포트: 모니터링 및 관리를 위해 컴퓨터에 연결하는 데 사용합니다.
4. RS-232 통신 포트: Another port for computer communication.
5. 지능형 슬롯: For optional network management cards (e.g., SNMP).
6. 외부 배터리 연결: (Only available for 'L' models) For connecting external battery packs to extend runtime.
7. 출력 리셉터클: Three universal sockets for connecting protected devices.

Figure 3: Typical applications for the Prolink PRO901ES UPS.

3. 설정 지침

Follow these steps for initial setup of your Prolink PRO901ES UPS:

1. 짐 풀기: Carefully remove the UPS from its packaging and inspect for any damage. Retain packaging for future transport.
2. 놓기: Place the UPS in a clean, dry, and well-ventilated area, away from direct sunlight or heat sources. Ensure adequate clearance for airflow.
3. 초기 충전: Before connecting any devices, plug the UPS into a standard AC power outlet using the provided power cord. Allow the unit to charge for at least 8 hours to ensure optimal battery performance.
4. 연결 장치: Once the UPS is fully charged, connect your critical electronic devices (e.g., computers, monitors, network equipment) to the output receptacles on the rear panel. Do not overload the UPS beyond its rated capacity (900W).
5. Communication Setup (Optional): For advanced monitoring and management, connect the UPS to a computer using a USB or RS-232 cable. Install the necessary software (if provided) to enable communication features.
6. 전원 켜기: Press the power button on the front panel to turn on the UPS. The LCD display will illuminate, indicating the operational status.

4. 사용 설명서

4.1 전원 켜기/끄기

• 전원을 켜려면: UPS 전원이 켜질 때까지 전면 패널의 전원 버튼을 길게 누르십시오.
• 전원을 끄려면: Press and hold the power button until the UPS powers off. Ensure all connected devices are safely shut down before powering off the UPS.

4.2 LCD 디스플레이 이해

The front panel LCD provides real-time information about the UPS status, including input/output voltage, battery level, load percentage, and various operational modes.

Figure 4: Monitoring status from the LCD display.

4.3 비상 전원 끄기(EPO)

The EPO function allows for an immediate and complete shutdown of the UPS and all connected equipment in an emergency. Refer to the detailed wiring diagram in the full user manual for proper EPO connection.

Figure 5: Zero transfer time ensures continuous operation during power events.

Figure 6: The UPS provides clean power output, mitigating various power issues.

Figure 7: High-Precision AVR regulates output voltage within 1% tolerance.

5. 유지관리

• 배터리 관리 : The UPS uses Lead Acid batteries. To prolong battery life, avoid frequent deep discharges and operate the UPS within recommended temperature ranges. Periodically perform a battery self-test if available through the monitoring software.
• 청소: Keep the UPS clean and free from dust. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners. Ensure ventilation openings are not blocked.
• 저장: If storing the UPS for an extended period, ensure it is fully charged and then recharge it every 3 months to prevent battery degradation.

6. 문제 해결

This section addresses common issues you might encounter with your UPS. For more complex problems, contact customer support.

• UPS가 켜지지 않음: Check if the AC input cable is securely connected and if the input circuit breaker has tripped. Ensure the battery is sufficiently charged.
• 짧은 배터리 사용 시간: This may indicate aging batteries or an overloaded UPS. Reduce the connected load or consider battery replacement if the unit is old.
• 큰 팬 소음: Some users have reported noticeable fan noise. While often normal for cooling, ensure the ventilation is not obstructed. If the noise is excessive or unusual, contact support.
• 연결된 기기에 전원이 공급되지 않습니다: Verify that the UPS is on and not in a fault state. Check the output receptacles and ensure devices are properly plugged in.

7. 사양

8. 보증 및 지원

The Prolink PRO901ES UPS comes with a 2년 국내 보증. For technical assistance or warranty claims, please refer to the contact information below.

Figure 8: Prolink Official Store information.

기술 지원:

• 이메일: support@prolink2u.com
• 전화: (65) 6357 0666