Edifier T5 파워드 서브우퍼 사용 설명서

제품 끝view

The Edifier T5 Powered Subwoofer is designed to enhance your audio experience by delivering powerful and accurate bass. Featuring an 8-inch driver and a low-pass filter, it integrates seamlessly with your existing speaker system to reproduce low-frequency sounds that your main speakers might miss.

이미지: 앞면 view of the Edifier T5 Powered Subwoofer, showcasing its 8-inch driver and robust enclosure.

주요 특징:

• 8-inch Speaker Driver: Delivers powerful sound with highly accurate bass for an improved listening experience.
• 저역 통과 필터(LPF): Ensures the subwoofer only plays frequencies too low for your main speakers, with a frequency response down to 38Hz.
• Thick MDF Wooden Enclosure: Constructed from high-quality, dense fiberboard to reduce acoustic resonance and improve audio quality.
• 자동 대기 모드: An energy-saving feature that puts the subwoofer into standby mode when not in use.
• 강력한 빌드 품질: Designed for durability and superior performance, ensuring long-lasting reliability.

설치 가이드

1. 포장 풀기 및 내용물

Carefully remove the subwoofer from its packaging. Ensure all components are present:

• Edifier T5 Subwoofer Unit
• 전원 케이블
• 3.5mm - RCA 오디오 케이블
• RCA-RCA 오디오 케이블
• 사용 설명서 (본 문서)

Image: Illustration of the Edifier T5 subwoofer and its accompanying cables, including the power cable, 3.5mm to RCA, and RCA to RCA audio cable.

2. 배치

Optimal placement of the subwoofer can significantly impact sound quality. Consider the following:

• Place the subwoofer on a stable, flat surface, preferably on the floor.
• Experiment with different locations in your room. Corners often provide the most bass reinforcement, but can sometimes lead to boomy sound. Placing it near your main speakers can improve sound integration.
• Ensure there is adequate space around the subwoofer, especially for the side-firing port, if applicable, to allow for proper air movement.

Image: Diagram illustrating the physical dimensions of the Edifier T5 subwoofer, showing its width, depth, and height.

이미지: 자세한 view of the bass reflex port located on the side of the Edifier T5 subwoofer.

3. 연결

The Edifier T5 offers flexible connection options. Choose the method that best suits your audio setup:

• Method 1 (Direct to Speakers with RCA Output): If your main speakers have an RCA output (e.g., "SUB OUT" or "LINE OUT"), connect the subwoofer directly to them using an RCA to RCA audio cable.
• Method 2 (Pass-Through Connection): If your source device (e.g., TV, gaming console, PC) has RCA outputs, you can connect it to the subwoofer's "Signal In" ports, and then connect the subwoofer's "Signal Out" ports to your main speakers. This allows the subwoofer to process the low frequencies before sending the full range signal to your speakers.

Image: Visual guide demonstrating two common ways to connect the Edifier T5 subwoofer to an audio system, including direct and pass-through configurations.

After connecting the audio cables, plug the power cable into the subwoofer and then into a wall outlet.

작동 지침

제어 및 조정

The Edifier T5 features controls on its rear panel for fine-tuning its performance:

• 볼륨 다이얼: Adjusts the overall output level of the subwoofer. Start with a low setting and gradually increase to blend with your main speakers.
• LPF (Low Pass Filter) Dial: Controls the crossover frequency, determining the maximum frequency the subwoofer will reproduce. Adjust this to match the low-frequency capabilities of your main speakers. A common starting point is around 80-100Hz.
• 위상 스위치(0°/180°): Adjusts the phase of the subwoofer's output relative to your main speakers. Experiment with both settings to find the one that provides the most impactful and coherent bass. This often depends on the subwoofer's placement relative to the listening position and main speakers.
• 전원 스위치: 서브우퍼를 켜거나 끕니다.

이미지: 상세 view of the rear control panel of the Edifier T5 subwoofer, highlighting the volume, low-pass filter, and phase adjustment dials, along with the input/output connections.

Automatic Standby Feature

The T5 subwoofer is equipped with an automatic standby feature to conserve power. If no audio signal is detected for a period, the subwoofer will enter a low-power standby mode. It will automatically wake up when an audio signal is detected again. This feature helps reduce electricity consumption when the subwoofer is not actively in use.

유지

To ensure the longevity and optimal performance of your Edifier T5 subwoofer, follow these maintenance guidelines:

• 청소: Use a soft, dry cloth to wipe down the exterior of the subwoofer. Avoid using abrasive cleaners, waxes, or solvents.
• 통풍: Ensure the subwoofer has adequate ventilation. Do not block the side-firing port or place the unit in an enclosed space without proper airflow.
• 환경: 서브우퍼를 직사광선, 열원, 과도한 습기, 먼지로부터 멀리 두십시오.
• 힘: Disconnect the power cable from the wall outlet if the subwoofer will not be used for an extended period.

문제 해결

If you encounter issues with your Edifier T5 subwoofer, refer to the following common problems and solutions:

명세서

Note: Product appearance may vary slightly between manufacturing batches. Some units may feature a silver faceplate with a black wooden enclosure, while others may have a black faceplate with a black wooden enclosure. Both versions offer identical performance.

Image: Depiction of the two possible aesthetic variations of the Edifier T5 subwoofer, highlighting that either design may be received.

보증 및 지원

보증 정보

The Edifier T5 Powered Subwoofer comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.

고객 지원

기술 지원, 본 설명서에 나와 있지 않은 문제 해결 또는 보증 관련 문의는 Edifier 고객 지원팀에 문의하십시오. 연락처 정보는 Edifier 공식 웹사이트에서 확인할 수 있습니다. web해당 사이트를 통해서나 제품을 구매한 소매업체를 통해서도 구매가 가능합니다.

Visit the official Edifier store for more information and product registration: 에디파이어 공식 스토어