Feit Electric 4ft T8 LED 범용 플러그 앤 플레이 튜브 조명 사용 설명서

1. 서론

Thank you for choosing Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED bulbs. Please read these instructions thoroughly before installation and retain them for future reference.

2. 안전 정보

• 설치, 제거 또는 점검 전에 항상 회로 차단기에서 전원을 차단하십시오.
• Do not use with dimmers unless explicitly stated on the product or packaging. These bulbs are non-dimmable.
• Ensure the fixture is compatible with Type A (Plug & Play) LED tubes. Refer to the compatible ballast list.
• Do not bend the tube during installation.
• This product is designed for indoor use and suitable for damp 위치.
• 전구를 분해하거나 개조하지 마십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 패키지 내용

각 패키지에는 다음이 포함됩니다.

• 4 x Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights

Image: Four Feit Electric 4ft T8 LED Universal Plug & Play Tube Lights, shown in a pack.

Image: Packaging for the Feit Electric 4ft LED Universal Linear Lamp, indicating "Plug & Play (Type A)" and T8/T12 replacement.

4. 제품 특징

• Plug & Play (Type A): Direct installation into existing fluorescent fixtures without rewiring or ballast removal.
• 에너지 절약: Uses 14 watts, replacing 32/40 watt fluorescent bulbs, producing 1700 lumens.
• 밝은 색상: 3000K Warm White for a soft, crisp light.
• 긴 수명: Rated for up to 50,000 hours, reducing replacement frequency.
• 즉시 켜짐: Provides full brightness immediately with no flickering or strobing.
• Shatterproof Coating: 내구성이 향상되었습니다.
• 인증: UL Listed, DLC Certified, RoHS compliant, 100% mercury-free.

Image: Graphic detailing key product specifications: 14 Watts (equivalent to 40 Watts), 1700 Lumens, G13 Bi-Pin Base, and Plug & Play (Type A) functionality.

Image: Graphic illustrating the product dimensions: 48 inches in length and 1.1 inches in width, highlighting its shatterproof coating.

5. 설정 및 설치

1. 전원 끄기 : 설치를 시작하기 전에 회로 차단기에서 조명 기구로 공급되는 전원이 완전히 차단되었는지 확인하십시오.
2. 오래된 형광등 제거: Carefully remove the existing fluorescent tubes from the fixture.
3. Check Ballast Compatibility: Verify that your existing ballast is compatible with Type A LED tubes. Refer to the "Compatible Ballasts" section or the product packaging for a list of compatible ballasts.
4. LED 튜브 설치: Insert the two pins of the Feit Electric LED tube into the lampholders on one end of the fixture. Gently push the tube into place and twist it until it locks securely into the lampholders on both ends. Ensure the tube is firmly seated.
5. 복원력 : Once the LED tube is securely installed, restore power at the circuit breaker.
6. 시험: 조명 스위치를 켜서 제대로 작동하는지 확인하세요.

Image: Diagram illustrating the "Direct Replacement (Type A)" installation method, showing the LED tube connecting to an existing ballast without rewiring.

Image: A detailed list of various compatible ballasts required for the proper function of the Feit Electric LED tubes.

6. 사용 설명서

After successful installation, simply use your existing light switch to turn the Feit Electric LED tube lights on and off. These bulbs provide instant full brightness without any warm-up time or flickering.

Image: An installed Feit Electric LED tube light illuminating a garage, demonstrating instant full brightness without flickering or strobing.

Image: A Feit Electric 3000K Warm White LED tube light installed and emitting a warm, soft light.

7. 유지관리

Feit Electric LED tube lights are designed for long-term, maintenance-free operation. They have an average life of 50,000 hours. No special cleaning or bulb replacement procedures are typically required during their lifespan. To clean the exterior of the bulb, ensure power is off and wipe with a soft, dry cloth.

8. 문제 해결

표시등이 켜지지 않음:

• 전원 스위치가 "ON" 위치에 있는지 확인하세요.
• Check that the circuit breaker is not tripped.
• Verify the LED tube is correctly seated in the lamp홀더.
• Confirm your existing ballast is compatible with Type A LED tubes. Incompatible ballasts may prevent the bulb from lighting or cause flickering.
• If replacing multiple bulbs, test each new bulb individually to identify any faulty units.

빛이 깜박입니다:

• Ensure the LED tube is fully and correctly inserted into the fixture.
• Verify ballast compatibility. An incompatible or failing ballast can cause flickering.

9. 사양

10. 보증 및 지원

This Feit Electric bulb comes with a 5년 보증. For warranty claims or technical support, please contact Feit Electric customer service. Refer to the official Feit Electric web최신 연락처 정보는 사이트에서 확인하세요.

제품에 대한 자세한 정보는 다음 웹사이트를 방문하세요. Feit Electric Storefront.