트랜스포머 제너레이션즈 워 포 사이버트론: 어스라이즈 디럭스 WFC-E19 퀸테슨 알리콘 액션 피규어 조립 설명서

1. 서론

This manual provides detailed instructions for the assembly, operation, and care of your Transformers Generations War for Cybertron: Earthrise Deluxe WFC-E19 Quintesson Allicon Action Figure. Please read these instructions carefully before use.

2. 안전 정보

경고: 질식 위험 - 작은 부품이 포함되어 있습니다. 3세 미만 어린이는 이용할 수 없습니다. 놀이 중에는 어른의 감독이 필요합니다.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1x Quintesson Allicon Action Figure
• 1x Spear Accessory
• 1x Red Decoder
• 1x 사용 설명서 (본 문서)

Image: The Transformers Earthrise Quintesson Allicon figure displayed in its retail packaging, showing the robot mode and included spear accessory.

4. 작동 지침: 변환

The Quintesson Allicon figure can transform between its robot mode and beast mode in 14 steps. Follow the steps below for a smooth transformation.

4.1. Robot Mode to Beast Mode

1. Remove the spear accessory from the figure's hand.
2. Fold the robot's feet upwards to form the beast mode's rear legs.
3. 로봇의 허리를 180도 회전시키세요.
4. Collapse the robot's chest and head into the body, revealing the beast mode head.
5. Extend the beast mode's jaw and position it.
6. Adjust the robot's arms to form the beast mode's front legs, ensuring the claws are positioned forward.
7. Extend the tail section from the back of the figure.
8. Secure all panels and tabs to lock the figure in beast mode.
9. The spear accessory can be stored or held by the beast mode.

Image: The Quintesson Allicon figure in its robot mode, standing upright and holding its spear accessory.

Image: The Quintesson Allicon figure transformed into its beast mode, resembling an alligator-like creature, holding the spear.

4.2. Beast Mode to Robot Mode

Reverse the steps above to transform the Allicon from beast mode back to robot mode.

4.3. Map and Decoder

Each package includes a piece of the Transformers Universe map and a red decoder. Use the red decoder to reveal hidden paths and details on the map. Collect other Earthrise figures to complete the full map.

Image: A hand holding the included red decoder over a section of the Transformers Universe map, illustrating how to reveal hidden details.

5. 유지관리

To ensure the longevity of your action figure:

• Keep the figure clean by wiping it with a dry, soft cloth. Avoid harsh chemicals or abrasive materials.
• 변색이나 재질 손상을 방지하기 위해 피규어를 직사광선과 극한 온도 변화를 피해 보관하십시오.
• Handle joints and moving parts gently during transformation to prevent breakage.

6. 문제 해결

몸매에 문제가 생기면 다음 사항을 고려하세요.

• 관절이 뻣뻣함: If joints are stiff, gently work them back and forth. Avoid excessive force. Applying a very small amount of silicone shock oil (not petroleum-based lubricants) to the joint pin can help, but use with extreme caution and sparingly.
• 부품이 정렬되지 않음: Ensure all previous transformation steps are completed correctly. Check for any tabs or pegs that need to be fully inserted into their corresponding slots. Refer to the transformation video for visual guidance.
• Detached Tail Piece: The tail piece is attached via a peg. If it detaches, carefully re-insert the peg into its slot. When rotating the tail, apply pressure at the peg base, not above the metal pin, to prevent damage.
• 누락된 액세서리: Verify package contents upon opening. If an accessory is missing, contact customer support.

7. 사양

8. 보증 및 지원

For information regarding product warranty or to contact customer support, please visit the official Hasbro web제품을 구매한 사이트 또는 판매점에 문의하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.

Official Transformers Store: 아마존의 트랜스포머 스토어