BONTEC Universal TV Stand ST13 Instruction Manual

1. 제품 오버view

The BONTEC Universal TV Stand ST13 is designed to provide a stable and adjustable mounting solution for a wide range of televisions. This stand is compatible with most LCD, LED, OLED, QLED, and Plasma TVs ranging from 26 to 65 inches.

주요 특징은 다음과 같습니다.

• 호환성: Supports VESA patterns from 75x75mm up to 600x400mm.
• 높이 조정: Offers multiple levels of height adjustment for optimal view주고받음.
• 안정: Constructed from high-quality cold-rolled steel with an 8mm tempered safety glass base, supporting up to 45 kg.
• 케이블 관리 : Integrated system to keep cables organized and out of sight.
• 쉬운 조립: Designed for straightforward installation without the need for wall drilling.

Image 1.1: The BONTEC Universal TV Stand ST13 with a television mounted, showcasin세련된 디자인과 기능성을 갖추고 있습니다.

2. 부품 목록

조립하기 전에 아래 나열된 모든 부품이 있는지, 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 손상된 경우 고객 지원 센터로 문의하십시오.

이미지 2.1: 폭발된 view showing all components, including TV mounting screws (M4, M6, M8 in various lengths), spacers, square washers, and assembly hardware (wire clips, buckles, rubber feet, Allen key, metal pad, plastic socket).

포함된 하드웨어:

• 중앙 기둥
• 강화 유리 베이스
• TV 마운팅 플레이트
• TV Mounting Arms (2x)
• 다양한 TV 나사(M4, M6, M8)
• Spacers (D8*5mm, D8*10mm)
• Washers (M4/M6/M8 Square)
• Assembly Screws (M6*10mm, M5*30mm, M6*30mm)
• M6.5 Washer, Metal Pad, Plastic Socket
• Wire Clips, Buckle, Rubber Feet, Allen Key

3. 조립 설명서

Follow these steps carefully to assemble your BONTEC Universal TV Stand. It is recommended to have a second person assist with mounting the TV.

Image 3.1: Visual guide for the assembly process, detailing each step from base assembly to cable management.

1. 1단계: 받침대 조립 Attach the mounting plate, steel pillar, and tempered glass base using the provided fixings. Ensure all screws are tightened securely.
2. Step 2: Position the Stand. Place the assembled stand on a flat, stable surface such as a desk or TV cabinet.
3. Step 3: Attach TV Rails. Mount the support rails to the back of your television using a screwdriver and the appropriate VESA screws and spacers from the hardware kit. Ensure the rails are securely fastened and level.
4. Step 4: Hang the TV. Carefully lift your television and hook the mounted rails onto the central mounting plate of the stand. Secure the TV to the stand using the safety screws or clips provided.
5. Step 5: Manage Cables. Route your TV cables through the integrated cable management system in the central column to keep them tidy and out of sight.

4. 사용 설명서

4.1 높이 조정

The BONTEC TV Stand offers flexible height adjustment to achieve your preferred view잉 수준.

• The main mounting plate can be adjusted to 6 different height levels, with each adjustment providing a 50mm change.
• Additionally, the TV mounting arms can be set at 2 different height levels, offering a 60mm adjustment for fine-tuning.

Image 4.1: Illustration of the 6 height settings for the mounting plate and 2 height settings for the TV hooks, totaling 8 possible height configurations.

4.2 케이블 관리

Utilize the integrated cable management system to maintain a clean and organized appearance for your entertainment setup.

• Route all TV and device cables through the central column using the provided wire clips and buckles.
• This helps to conceal unsightly wires, preventing clutter and potential tripping hazards.

Image 4.2: Detail of the cable management clips on the central column, designed to keep wires tidy.

5. 유지관리

To ensure the longevity and optimal performance of your BONTEC Universal TV Stand, follow these maintenance guidelines:

• 청소: Wipe the stand with a soft, dry cloth. For stubborn marks on the glass base, use a mild glass cleaner. Avoid abrasive cleaners or solvents that could damage the finish.
• 점검: 모든 나사와 연결부가 단단히 조여져 있는지 주기적으로 점검하십시오. 연결부가 헐거워지면 안정성이 저하될 수 있습니다.
• 중량 제한: 최대 적재 용량은 45kg(99lbs)을 초과하지 마십시오.
• 놓기: Ensure the stand is always placed on a level and stable surface to prevent tipping.

6. 문제 해결

TV 스탠드 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

• 문제: The TV appears unstable or wobbly.
  해결책: Ensure all assembly screws are fully tightened. Verify that the stand is placed on a flat, level surface. Check that the TV mounting arms are securely hooked onto the plate and the safety screws are engaged.
• 문제: TV mounting screws do not fit.
  해결책: The stand includes a variety of screws (M4, M6, M8) and spacers. Refer to your TV's manual for the correct VESA screw size. Try different screw lengths with appropriate spacers to ensure a snug fit without overtightening.
• 문제: 케이블 관리가 어렵다.
  해결책: Ensure you are using the provided wire clips and routing cables through the designated channels in the central column. If you have many cables, consider using additional cable ties for better organization.
• 문제: TV is not at the desired height.
  해결책: Adjust the height of the mounting plate and/or the TV mounting arms as described in Section 4.1. Ensure the TV is removed before making height adjustments to the plate.

If the problem persists, please contact BONTEC customer support for further assistance.

7. 사양

Image 7.1: Detailed dimensions and VESA pattern compatibility for the BONTEC TV Stand ST13.

8. 보증 및 지원

Specific warranty information for the BONTEC Universal TV Stand ST13 is not provided in this manual. For details regarding warranty coverage, spare parts availability, or technical support, please contact BONTEC customer service directly through their official web제품을 구매한 사이트 또는 소매업체.

보증 청구를 위해 구매 증빙서류를 보관하세요.