Mackie ProFX16v3 16-Channel Sound Reinforcement Mixer

1. 서론

Thank you for choosing the Mackie ProFX16v3 16-Channel Sound Reinforcement Mixer. This manual provides essential information for setting up, operating, and maintaining your mixer to ensure optimal performance and longevity. The ProFX16v3 is designed for live sound, home recording, and content creation, featuring high-quality Onyx preamps, a versatile GigFX effects engine, and a 24-bit/192 kHz 2x4 USB recording interface.

2. 중요 안전 지침

• 본 기기를 작동하기 전에 이 설명서를 꼼꼼히 읽어 주십시오.
• 이 지침을 향후 참고용으로 보관하세요.
• 제품과 본 설명서에 있는 모든 경고 사항을 주의 깊게 따르십시오.
• 모든 지시를 따르세요.
• 이 기기를 물 근처에서 사용하지 마십시오.
• 마른 천으로만 닦으십시오.
• 환기구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오.
• 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
• 극성 또는 접지형 플러그의 안전 목적을 저버리지 마십시오. 극성 플러그에는 두 개의 날이 있으며, 하나는 다른 하나보다 넓습니다. 접지형 플러그에는 두 개의 날과 세 번째 접지 갈래가 있습니다. 넓은 날 또는 세 번째 갈래는 안전을 위해 제공됩니다. 제공된 플러그가 콘센트에 맞지 않으면 전기 기술자에게 문의하여 오래된 콘센트를 교체하십시오.
• 전원 코드가 밟히거나 끼지 않도록 보호하세요. 특히 플러그, 편의용 콘센트 및 기기에서 나오는 부분은 보호하세요.
• 제조사가 지정한 부속품/액세서리만 사용하세요.
• 제조업체에서 지정하거나 장비와 함께 판매한 카트, 스탠드, 삼각대, 브래킷 또는 테이블과 함께만 사용하십시오. 카트를 사용하는 경우 카트/장비 조합을 이동할 때 넘어져 부상을 입지 않도록 주의하십시오.
• 번개 폭풍 시 또는 장기간 사용하지 않을 때는 기기의 플러그를 뽑아두세요.
• 모든 서비스는 자격을 갖춘 서비스 담당자에게 의뢰하십시오. 전원 코드나 플러그가 손상되었거나, 액체가 쏟아졌거나, 물체가 기기에 떨어졌거나, 기기가 비나 습기에 노출되었거나, 정상적으로 작동하지 않거나, 떨어졌을 때와 같이 기기가 어떤 식으로든 손상된 경우 서비스가 필요합니다.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• Mackie ProFX16v3 16-Channel Sound Reinforcement Mixer
• 전원 케이블
• Xpix 1/4 inch TRS Cables (15 feet) x 4
• Xpix Pro-Audio XLR Cables (10 feet) x 4
• Female XLR to Male 1/4 TS Mono Jack Unbalanced Microphone Cable
• Mono 1/4 inch Phone Male - 2 RCA Male Y Cable (3.3 feet)
• 2.0 A Male to B Male USB Cable
• Fibertique Microfiber Cleaning Cloth

Image: Fibertique Microfiber Cleaning Cloth, useful for maintaining the mixer's surface.

4. 제품 오버view

The Mackie ProFX16v3 is a robust 16-channel mixing console designed for professional audio applications. It integrates high-quality components and features to deliver excellent sound for live performances, studio recording, and content creation.

주요 특징:

• 오닉스 마이크 프리amps: Equipped with 11 Onyx microphone preamps, offering up to 60dB of gain and ultra-low noise performance for pristine audio capture.
• GigFX 효과 엔진: Features 24 built-in FX options, including reverbs, delays, and choruses, to enhance your sound.
• High-Resolution USB Interface: A 24-bit/192 kHz 2x4 USB recording interface allows for easy, low-latency monitoring and recording to a computer.
• Flexible Input Options:
• Channels 1-2: XLR/1/4-inch combo inputs for microphones or line-level sources.
• Channels 3-8: XLR or 1/4-inch inputs.
• Channels 9-10, 11-12, 13-14: Two 1/4-inch inputs each.
• Channels 15-16: 3.5mm stereo input, with a USB 3-4 switch to override the 3.5mm input for USB return from a computer.
• Comprehensive Channel Controls: Each channel (1-16) includes gain control, 3-band EQ, three AUX sends (for monitors), a dedicated FX send, pan, mute, and a level fader.
• 마스터 출력: XLR and 1/4-inch connectors for main outputs.
• 헤드폰 출력: Dedicated 1/4-inch TRS headphone output with independent level control.
• 소프트웨어 번들: Includes Pro Tools | First subscription, Mackie Musician Collection (23 powerful plugins), and Waveform OEM DAW with 16 contemporary FX plugins. Compatible with Mac & Windows.

Image: Front panel view of the Mackie ProFX16v3 mixer, showing all input channels, controls, and the GigFX section.

Image: Close-up of the Mackie ProFX16v3 mixer controls, highlighting the faders, knobs, and buttons for individual channels.

이미지: 각도 view Mackie ProFX16v3 믹서의 특징을 보여줍니다.asing its compact design and comprehensive control surface.

5. 설정 가이드

5.1 전원 연결

1. 믹서의 전원 스위치가 꺼짐(OFF) 위치에 있는지 확인하십시오.
2. Connect the provided power cable to the AC input on the rear panel of the mixer.
3. 전원 케이블의 다른 쪽 끝을 적절한 AC 전원 콘센트에 꽂으십시오.
4. Turn the power switch to the ON position to power on the mixer.

5.2 입력 연결

오디오 소스를 해당 입력 채널에 연결하세요.

• 마이크: Use XLR cables to connect microphones to the XLR inputs on channels 1-8. For condenser microphones, activate phantom power (+48V) using the dedicated switch.
• 라인 레벨 계측기/기기: Use 1/4-inch TRS or TS cables to connect instruments (keyboards, guitars with DI boxes) or other line-level devices to the 1/4-inch inputs on channels 1-14.
• 스테레오 장치: For stereo sources like media players, use the 3.5mm stereo input on channels 15-16.

5.3 출력 연결

믹서의 출력 단자를 연결하세요 amplification system or recording device:

• 주요 출력 : Connect the XLR or 1/4-inch main outputs to your main PA system or studio monitors.
• Monitor Outputs (AUX Sends): Use the AUX send outputs to connect to stage monitors or headphone amplifiers for performers.
• 헤드폰: Plug your headphones into the 1/4-inch TRS headphone jack.

5.4 USB 연결

To use the mixer as an audio interface for recording or playback with a computer:

1. Connect the USB-B port on the mixer's rear panel to a USB-A port on your computer using the provided USB cable.
2. Install the necessary drivers (if prompted by your operating system or software).
3. Select the Mackie ProFX16v3 as your audio input/output device in your computer's sound settings and DAW software.
4. For USB playback through channels 15-16, ensure the "USB 3-4" switch on channel 15/16 is engaged.

Image: Rear panel of the Mackie ProFX16v3 mixer, showing power input, USB port, and main XLR/1/4-inch outputs.

6. 사용 설명서

6.1 Basic Signal Flow

Audio signal typically flows from the input (microphone/instrument) through the channel strip (gain, EQ, sends), then to the main mix, and finally out through the main outputs.

6.2 이득 Stag잉

1. Set all channel faders and the main mix fader to their lowest positions.
2. For each input channel, speak or play into the microphone/instrument at its loudest expected level.
3. 천천히 증가 얻다 knob for that channel until the "OL" (Overload) indicator briefly flashes, then back it off slightly. This sets the optimal input level for the Onyx preamp.
4. Gradually raise the channel fader to the desired level.
5. Finally, raise the main mix fader to achieve the overall output volume.

6.3 Using the 3-Band EQ

Each channel features a 3-band equalizer (High, Mid, Low) to shape the tone of your audio. Adjust these knobs to cut or boost specific frequency ranges. A flat setting (knob at 12 o'clock) applies no equalization.

6.4 AUX Sends (Monitors)

The three AUX send knobs on each channel control the amount of that channel's signal sent to the corresponding AUX output. These are typically used for creating separate monitor mixes for performers.

6.5 FX Send and GigFX Engine

1. 전용을 사용하세요 FX 센드 knob on each channel to send a portion of that channel's signal to the GigFX effects engine.
2. Select one of the 24 available effects using the FX 사전 설정 손잡이.
3. 조정하다 FX 레벨 control in the master section to blend the effect into the main mix.

6.6 Pan and Mute

• 그만큼 팬 knob positions the channel's signal in the stereo field (left to right).
• 그만큼 무음 button silences the channel's output to the main mix and AUX sends.

6.7 USB 녹음 및 재생

Once connected to a computer via USB and drivers are installed, you can record the main mix (or specific channels, depending on your DAW setup) and play back audio from your computer through the mixer. Use the USB 3-4 switch on channels 15-16 to route computer audio to those channels for mixing.

7. 유지관리

• 청소: Regularly wipe the mixer's surface with a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp 천을 사용한 후 마른 천으로 닦아낼 수 있습니다. 연마성 세척제나 용제는 사용하지 마세요.
• 통풍: 과열을 방지하려면 환기구가 막히지 않았는지 확인하세요.
• 저장: When not in use, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures. If transporting, use a protective case.
• 케이블 관리 : Keep cables organized and avoid sharp bends or kinks to prevent damage.

8. 문제 해결

9. 사양

10. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the official Mackie website or contact your local Mackie distributor. Keep your proof of purchase for warranty claims.

온라인 리소스: mackie.com/support