Axis M7104 Video Encoder User Manual

1. 서론

The Axis M7104 Video Encoder is designed to integrate analog CCTV cameras into an IP-based video surveillance system. This device digitizes analog video signals, allowing them to be viewed, recorded, and managed over a network. It supports various video surveillance and security system applications, providing a bridge between traditional analog infrastructure and modern IP network capabilities.

그림 1: Axis M7104 Video Encoder. This image shows the front of the video encoder, highlighting its compact design and various input/output ports for connecting analog cameras and network cables.

2. 안전 정보

• 실내에서만 사용 가능: This device is designed for indoor use. Do not expose it to outdoor elements, moisture, or extreme temperatures.
• 전원 공급 장치: Use only the power adapter supplied with the device or a compatible power supply specified by Axis Communications.
• 통풍: 기기의 과열을 방지하기 위해 기기 주변에 적절한 환기가 이루어지도록 하십시오. 통풍구를 막지 마십시오.
• 설치: Mount the device securely on a stable surface or rack.
• 청소: Disconnect power before cleaning. Use a dry, soft cloth. Do not use liquid or aerosol cleaners.
• 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• Axis M7104 Video Encoder Unit
• 전원 어댑터
• 설치 가이드/설명서
• Mounting Bracket (if applicable)

4. 설정

4.1 물리적 연결

1. 아날로그 카메라 연결하기: Connect your analog CCTV cameras to the video input ports on the Axis M7104 using coaxial cables. The encoder typically features multiple BNC connectors for this purpose.
2. 네트워크에 연결: Connect an Ethernet cable (Cat 6 recommended) from the RJ45 network port on the encoder to your network switch or router. Ensure the network connection is active.
3. 전원 연결: Plug the power adapter into the encoder's power input and then into a suitable power outlet. The device will power on automatically.

4.2 초기 구성

After connecting the hardware, you will need to configure the encoder via its web 인터페이스:

• 장치 검색: Use the Axis IP Utility or Axis Device Manager software to discover the encoder on your network and obtain its IP address.
• 입장 Web 인터페이스: 열기 web browser and enter the encoder's IP address. You will be prompted to set a root password for the device.
• Configure Video Streams: 내에서 web interface, configure video settings for each connected camera, including resolution, frame rate (e.g., 30 Hz), compression, and streaming profiles.
• 네트워크 설정: Adjust network settings such as static IP address, DNS, and gateway if required by your network infrastructure.

5. Operating the Video Encoder

Once configured, the Axis M7104 Video Encoder operates by continuously digitizing and streaming video from connected analog cameras over the network. It is primarily used for video surveillance and security systems.

• 살다 View: Access live video streams from connected cameras through a compatible Video Management Software (VMS) or directly via the encoder's web 인터페이스.
• 녹음: Integrate the encoder with a Network Video Recorder (NVR) or VMS for continuous or event-triggered recording of video streams.
• 이벤트 관리: Configure event triggers (e.g., motion detection, external input) and corresponding actions (e.g., send notifications, start recording) through the encoder's web 인터페이스 또는 VMS.
• 원격 접속: Access video streams and manage the encoder remotely via a secure network connection, often facilitated by your VMS or network configuration.

6. 유지관리

• 청소: Periodically clean the exterior of the encoder with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.
• 펌웨어 업데이트: Axis Communications를 정기적으로 확인하세요. website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow the instructions provided by Axis for firmware update procedures.
• 환경 조건: Ensure the operating environment remains within the specified temperature and humidity ranges for indoor use to prevent damage and ensure longevity.

7. 문제 해결

일반적인 문제 및 해결책:

• 전원 없음:
  • Verify the power adapter is securely connected to both the encoder and a working power outlet.
  • 전원 콘센트가 작동하는지 확인하세요.
• 네트워크 연결 없음:
  • Ensure the Ethernet cable is properly connected to the RJ45 port on the encoder and the network switch/router.
  • Check the network status lights on the encoder and the switch.
  • Verify network settings (IP address, subnet mask, gateway) are correct.
  • Try restarting the encoder and the network switch.
• 비디오 신호 없음:
  • Confirm that analog cameras are properly connected to the coaxial video input ports.
  • Ensure cameras are powered on and functioning correctly.
  • Check video settings in the encoder's web interface for the specific channel.
• 접근할 수 없습니다 Web 인터페이스:
  • Verify the encoder's IP address is correct and reachable from your computer.
  • Ensure your computer is on the same network segment as the encoder.
  • 컴퓨터의 액세스를 차단할 수 있는 방화벽이나 바이러스 백신 소프트웨어를 일시적으로 비활성화하세요.
  • Try using the Axis IP Utility to rediscover the device.

8. 사양

9. 보증 및 지원

자세한 보증 정보, 기술 지원 및 추가 자료는 Axis Communications 공식 웹사이트를 방문하십시오. website. You can find product documentation, FAQs, and contact information for customer service.

공식적인 Web대지: www.axis.com

고객 지원팀에 문의하실 때는 제품 모델 번호(01679-001)와 일련 번호를 준비해 주시기 바랍니다.