Absima Hurricane Brushed 1:18 4WD RC Truggy Instruction Manual

소개

Congratulations on your purchase of the Absima Hurricane Brushed 1:18 4WD RC Truggy. This ready-to-run (RTR) model is designed for both indoor and outdoor use, offering an exciting remote-controlled driving experience. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new RC Truggy. Please read it thoroughly before first use.

Image: The Absima Hurricane 1:18 4WD RC Truggy, showcasing its compact design and robust wheels.

안전 정보

• Always operate the RC Truggy in open areas, away from people, pets, and obstacles.
• 공공 도로, 수역 또는 유량이 많은 곳 근처에서 작동하지 마십시오.tage 라인.
• 손, 머리카락, 헐렁한 옷 등을 움직이는 부품에 가까이 두지 마십시오.
• 14세 미만 사용자의 경우 성인의 감독을 받는 것이 좋습니다.
• Ensure the battery is fully charged before use and disconnected after use.
• 배터리를 극단적인 온도나 직사광선에 노출시키지 마십시오.
• Use only the provided charger and battery.
• The Truggy features splash protection, but it is not fully waterproof. Avoid submerging it in water.

패키지 내용

The Absima Hurricane Brushed 1:18 4WD RC Truggy package includes the following items:

• Absima Hurricane 1:18 4WD RC Truggy (fully assembled)
• 2.4 GHz Anti-Interference Remote Control
• Li-ion 2S 7.4V 1200mAh Battery
• USB 충전기

설정

1. 배터리 충전

1. USB 충전기를 호환되는 USB 전원(예: 컴퓨터 USB 포트, USB 벽면 어댑터)에 연결하십시오.
2. Connect the Li-ion 2S 7.4V 1200mAh battery to the USB charger.
3. Allow the battery to charge fully. The charging indicator on the USB charger will typically change color or turn off when charging is complete. Refer to the charger's specific instructions for details.
4. 충전하는 동안 배터리를 방치하지 마십시오.

2. Installing the Truggy Battery

1. Locate the battery compartment on the Truggy.
2. 배터리함 덮개를 조심스럽게 엽니다.
3. Insert the fully charged Li-ion battery into the compartment, ensuring correct polarity.
4. Connect the battery connector to the Truggy's power connector.
5. 배터리 덮개를 단단히 닫으세요.

3. 리모컨 배터리 설치

1. 2.4GHz 리모컨 뒷면의 배터리함을 여세요.
2. 극성 표시에 따라 필요한 배터리(일반적으로 AA 배터리, 미포함)를 삽입하십시오.
3. 배터리 덮개를 닫습니다.

4. 초기 검사

Before first use, visually inspect the Truggy for any loose parts, damaged components, or obstructions in the wheels or drivetrain. Ensure all screws are tightened and the suspension moves freely.

운영

1. 켜기/끄기

1. Turn on the remote control first. The indicator light should illuminate.
2. Turn on the Truggy by pressing its power switch. The Truggy's indicator light should illuminate and then pair with the remote control.
3. To turn off, first turn off the Truggy, then the remote control.

2. 주행 제어

• 스티어링 휠 : Rotate the steering wheel on the remote control left or right to steer the Truggy.
• 스로틀 트리거: 방아쇠를 몸쪽으로 당기면 앞으로 가속하고, 방아쇠를 몸에서 멀리 밀면 브레이크 또는 후진이 됩니다.

3. 운전 요령

• Start with gentle throttle inputs to get a feel for the Truggy's speed and handling.
• Practice steering in open spaces before attempting more complex maneuvers.
• The 4WD system provides excellent traction on various terrains.
• The Truggy is equipped with splash protection, allowing operation on damp surfaces, but avoid deep puddles or submersion.
• If the Truggy loses range or control, immediately stop operation and check battery levels or interference.

유지

1. 청소

• After each use, especially in dirty or dusty conditions, clean the Truggy.
• 부드러운 브러시나 압축 공기를 사용하여 차체, 바퀴 및 서스펜션 부품에서 먼지와 이물질을 제거하십시오.
• 광고로 몸을 닦다amp 옷감. 강한 화학물질이나 용제를 사용하지 마십시오.

2. 배터리 관리

• Always disconnect the battery from the Truggy after use.
• 배터리는 직사광선과 열원을 피해 서늘하고 건조한 곳에 보관하십시오.
• For long-term storage, charge the Li-ion battery to approximately 50% capacity.
• Never overcharge or completely discharge the battery.

3. 보관

• Store the Truggy and remote control in a dry, cool environment.
• 장기간 보관할 경우 리모컨에서 배터리를 제거하세요.

4. 일반 검사

• Regularly check for loose screws, worn tires, or damaged suspension parts.
• 조향 장치가 원활하게 작동하는지 확인하십시오.

문제 해결

명세서

보증 및 지원

For warranty information and technical support, please refer to the official Absima website or contact your local dealer. Keep your purchase receipt as proof of purchase for any warranty claims.