setty PowerBank 10000 mAh User Manual

소개

Thank you for choosing the setty PowerBank 10000 mAh. This portable power bank is designed to provide convenient and reliable charging for your mobile devices on the go. Its slim design makes it easy to carry, ensuring your devices stay powered throughout the day. Please read this manual carefully before using the product to ensure safe and optimal performance.

중요한 안전 정보

WARNING: To prevent fire, electric shock, or injury, always follow basic safety precautions when using this product.

• 모바일 기기를 극한의 온도(45°C 이상 또는 0°C 이하)에 노출시키지 마세요.
• Do not expose to direct sunlight, heat sources, or open flames.
• Do not disassemble, modify, or attempt to repair the device. This may result in fire, explosion, or other hazards.
• 보조 배터리를 떨어뜨리거나, 구멍을 내거나, 강한 충격을 가하지 마십시오.
• 물, 습기 및 부식성 물질로부터 멀리하십시오.
• Do not use if the power bank is swollen, leaking, or shows any signs of damage.
• 현지 규정에 따라 책임감 있게 제품을 폐기하십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

If the power bank exhibits unusual behavior, such as swelling, overheating, or emitting smoke, immediately discontinue use and contact customer support.

패키지 내용

• setty PowerBank 10000 mAh
• 마이크로 USB 충전 케이블
• 사용 설명서 (본 문서)

제품 끝view

그림 1: 전면 view of the setty PowerBank 10000 mAh, showing the setty logo, 10000mAh indicator, and LED battery indicators. Two USB-A output ports and one Micro-USB input port are visible on the top edge.

Figure 2: The setty PowerBank 10000 mAh displayed within its retail packaging, highlighting key features such as dual output, micro USB cable included, fast charging, over discharge protection, and overheating protection.

The setty PowerBank features a compact design with essential ports for charging and recharging. It includes LED indicators to show the remaining battery level.

설정: 초기 충전

Before first use, it is recommended to fully charge your setty PowerBank.

1. 동봉된 마이크로 USB 케이블의 작은 쪽 끝을 보조 배터리의 마이크로 USB 입력 포트에 연결하십시오.
2. Connect the standard USB end of the cable to a USB wall charger (not included) or a computer's USB port.
3. The LED indicators on the power bank will light up, indicating the charging progress. Each LED typically represents 25% of the battery capacity.
4. Once all LEDs are solid and no longer blinking, the power bank is fully charged. Disconnect the cable.

전원 공급 방식에 따라 완전 충전에는 몇 시간이 걸릴 수 있습니다.

보조 배터리 작동 방법

장치 충전하기

1. Connect your device's charging cable (e.g., USB-A to Lightning, USB-A to USB-C, or USB-A to Micro USB) to one of the USB-A output ports on the power bank.
2. 케이블의 다른 쪽 끝을 모바일 장치에 연결합니다.
3. The power bank should automatically begin charging your device. The LED indicators will show the remaining power level of the power bank.
4. When your device is fully charged, or when you wish to stop charging, disconnect the cable from both the power bank and your device.

The power bank features dual USB output ports, allowing you to charge two devices simultaneously.

배터리 수준 확인

To check the remaining battery level of the power bank, briefly press the power button (if present, otherwise it might be automatic). The LED indicators will illuminate to show the current charge:

• 1개의 LED: 0-25% 남음
• 2개의 LED: 25-50% 남음
• 3개의 LED: 50-75% 남음
• 4개의 LED: 75-100% 남음

유지

• 보조 배터리를 부드럽고 마른 천으로 닦으십시오. 독한 화학 약품이나 연마성 세척제를 사용하지 마십시오.
• 모바일 배터리는 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• 장기간 사용하지 않을 경우 배터리 수명 유지를 위해 최소 3개월에 한 번씩 보조 배터리를 충전하십시오.
• Avoid overcharging or completely discharging the power bank frequently, as this can reduce battery lifespan.

문제 해결

명세서

• 상표: 세티
• 모델: gsm043160
• 용량: 10000mAh
• 배터리 유형: 리튬이온
• 입력: 1x Micro-USB (Voltage: 5볼트)
• 산출: 2x USB-A (Dual Output 2 x 2.1 A)
• 색상: 검은색
• 특징: 슬림한 디자인

보증 및 지원

For warranty information and technical support, please refer to the warranty card included with your product or visit the official setty website. If you encounter any issues not covered in this manual, please contact setty customer service for assistance.

보증 청구를 위해 구매 증명서를 보관하십시오.