1. 서론
The Huawei 5G CPE Pro H112-372 is a high-performance wireless gateway designed to provide ultra-fast internet connectivity by converting 5G/4G mobile network signals into Wi-Fi and wired Ethernet connections. This device supports both 5G and 4G networks, offering speeds up to 2.33Gbps for downloads. It is equipped with dual-band Wi-Fi (2.4G/5G) and multiple Gigabit Ethernet ports, making it suitable for home and small office environments requiring robust and reliable internet access.
2. 안전 정보
- Do not expose the device to extreme temperatures, direct sunlight, or dusty environments.
- Keep the device away from water, fire, and flammable materials.
- 기기와 함께 제공된 원래 전원 어댑터만 사용하세요.
- 기기를 분해하거나 개조하지 마십시오. 보증이 무효화됩니다.
- 과열을 방지하려면 장치 주변을 적절하게 환기시키십시오.
- 강한 전자기장 근처에 장치를 두지 마십시오.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x Huawei 5G CPE Pro (H112-372)
- 1 x LAN 케이블
- 빠른 시작 가이드 1권 (영문)
- 1 x Switching Power Adaptor (12V/2A)
4. 제품 오버view
그림 4.1: 전면 view of the Huawei 5G CPE Pro H112-372, showing the HUAWEI logo, 5G and 4G indicator lights, Wi-Fi indicator, and the H button.
그림 4.2: 측면 view of the Huawei 5G CPE Pro H112-372, highlighting its sleek, white design.
그림 4.3: 상단 view of the Huawei 5G CPE Pro H112-372, featuring an embossed '5G' logo.
4.1. LED 표시기
- 5G 표시기: 5G 네트워크 상태를 나타냅니다.
- 4G 표시기: 4G 네트워크 상태를 나타냅니다.
- Wi-Fi 표시기: Shows Wi-Fi status.
4.2. 포트 및 버튼
- 전원 포트: 전원 어댑터에 연결합니다.
- LAN/WAN Port (Gigabit): Connects to a computer or other network devices, or to an external modem/router for WAN connectivity.
- LAN Port (Gigabit): Connects to a computer or other network devices.
- SIM Card Slot (Nano-SIM): Insert your Nano-SIM card here.
- External LTE Antenna Ports (TS-9): Two ports for optional external LTE antennas to improve signal reception.
- H 버튼: Used for WPS connection or to pair with other Huawei HiLink devices.
- 재설정 버튼: Located in a small pinhole. Press and hold for 3 seconds to restore factory settings.
5. 설정
5.1. SIM 카드 삽입
- 장치의 전원이 꺼져 있는지 확인하세요.
- 장치에서 SIM 카드 슬롯을 찾습니다.
- Insert a Nano-SIM card into the slot with the gold contacts facing down and the notched corner aligned correctly. Push until it clicks into place.
- To remove the SIM card, gently push it in again until it springs out.
5.2. 전원 연결하기
Connect the provided power adapter to the power port on the device and then plug the adapter into a power outlet. The device will automatically power on.
5.3. 초기 구성
You can configure the device using either the Web UI or the HUAWEI SmartHome App.
사용하여 Web 사용자 인터페이스:
- Connect your computer to the CPE Pro via Wi-Fi or an Ethernet cable. The default Wi-Fi name (SSID) and password are on the label at the bottom of the device.
- 열기 web 브라우저를 열고 기본 IP 주소를 입력하세요(일반적으로 192.168.8.1) 주소 표시줄에
- Follow the on-screen instructions of the setup wizard to configure your internet connection and Wi-Fi settings.
Using the HUAWEI SmartHome App:
- Download the HUAWEI SmartHome App from your device's app store (iOS or Android).
- Connect your smartphone to the CPE Pro's Wi-Fi network.
- Open the app and follow the instructions to add and configure your device.
6. 장치 작동
6.1. Wi-Fi에 연결하기
To connect your devices (smartphones, laptops, tablets) to the CPE Pro's Wi-Fi network:
- 기기에서 사용 가능한 Wi-Fi 네트워크를 검색하세요.
- Select the Wi-Fi network name (SSID) displayed on the CPE Pro's label.
- Enter the Wi-Fi password (Key) found on the same label.
The CPE Pro supports dual-band Wi-Fi (2.4GHz and 5GHz) concurrently, allowing for flexible connections and optimized performance for various devices.
6.2. 이더넷 케이블을 이용한 연결
For wired connections, use an Ethernet cable to connect your computer or other network devices to one of the Gigabit LAN ports on the CPE Pro.
6.3. 고급 기능
- VPN 클라이언트: The device supports PPTP and L2TP VPN client modes, allowing you to establish secure connections to VPN servers.
- VPN 패스스루: Enables VPN traffic to pass through the router.
- 외부 안테나 지원: Utilize the two TS-9 ports for external LTE antennas to enhance signal strength in areas with weak cellular coverage.
7. 유지관리
7.1. 펌웨어 업데이트
정기적으로 펌웨어 업데이트를 확인하고 설치하세요. Web UI or HUAWEI SmartHome App to ensure optimal performance, security, and access to new features.
7.2. 공장 설정 복원
If you encounter persistent issues or wish to reset all settings, you can restore the device to its factory defaults:
- With the device powered on, use a pin or straightened paperclip to press and hold the Reset button (located in a small pinhole) for approximately 3 seconds.
- Release the button when the indicators flash. The device will restart with factory default settings.
7.3. 장치 청소
부드럽고 마른 천을 사용하여 기기 외부를 닦으세요. 액체 세척제나 에어로졸은 사용하지 마세요.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 인터넷에 연결되지 않았습니다. | SIM card not inserted correctly, no network signal, incorrect APN settings, or service provider issue. | Ensure SIM card is properly inserted. Check network signal strength via indicators. Verify APN settings in Web UI. Contact your service provider. |
| Slow Wi-Fi speed. | Interference, too many connected devices, device too far from router, or outdated firmware. | Move closer to the router. Reduce number of connected devices. Try changing Wi-Fi channel in Web UI. Update firmware. |
| 접근할 수 없습니다 Web UI. | 잘못된 IP 주소, 네트워크 연결 문제 또는 브라우저 캐시 문제일 수 있습니다. | 올바른 IP 주소를 사용하고 있는지 확인하십시오.192.168.8.1). Clear browser cache. Try a different browser or device. |
| 장치가 과열되었습니다. | Poor ventilation or prolonged heavy use. | Ensure adequate airflow around the device. Do not cover ventilation holes. Place in a cool, well-ventilated area. |
9. 사양
| 특징 | 설명 |
|---|---|
| 모델 | H112-372 |
| 치수(길이 x 너비 x 높이) | 4.21 x 3.9 x 8.46 인치 |
| 무게 | 3.56파운드 |
| 5G 작동 주파수 | TDD: n41(2500)/n77(3300~3800)/n78(3500)/n79(4800~4900) |
| 4G LTE FDD Operating Frequency | B1, B3, B5, B7, B8, B20, B28, B32 |
| 4G LTE TDD Operating Frequency | B34, B38, B39, B40, B41, B42, B43 |
| Max. Download Speed (5G) | 최대 2.33Gbps |
| Max. Upload Speed (5G) | 최대 650Mbps |
| 와이파이 표준 | 802.11a/b/g/n/ac |
| Wi-Fi 주파수 대역 | 2.4G/5G Dual Band Concurrently |
| 최대 Wi-Fi 사용자 수 | 최대 64개 |
| 이더넷 포트 | 1 x Gigabit LAN/WAN, 1 x Gigabit LAN (RJ45) |
| SIM 카드 슬롯 | 1 x 나노-SIM |
| 외부 안테나 포트 | TS-9 2개 |
| VPN 지원 | VPN Client (PPTP, L2TP), VPN Pass-through |
| 관리 | Web UI, HUAWEI SmartHome APP (iOS or Android) |
10. 보증 및 지원
This Huawei product is covered by a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty period and coverage details. For technical support, troubleshooting assistance, or service requests, please visit the official Huawei support web해당 웹사이트를 방문하거나 고객 서비스 핫라인으로 문의하십시오. 보증 청구를 위해 구매 영수증을 구매 증빙 자료로 보관하십시오.
메모: The Huawei 5G CPE Pro H112-372 does NOT support most of USA 5G/4G SIM cards. It primarily supports 4G SIM cards globally, with 5G band support for regions including Europe, Middle East, China, Africa, Australia, Austria, Brazil, Hong Kong, Japan, Maldives, New Zealand, Philippines, Russia, South Korea, Thailand, and Singapore (as of June 2020). Please verify compatibility with your local network provider before use.