1. 서론
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Hazet 9033M-9 Mini Polisher. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
2. 안전 지침
Always observe the following safety precautions when operating the Hazet 9033M-9 Mini Polisher:
- 적절한 개인 보호 장비(PPE)를 착용하세요 including eye protection, hearing protection, and gloves.
- Ensure a stable and clean work environment. 작업 공간을 밝고 방해가 되는 것이 없는 상태로 유지하세요.
- 공기 공급을 분리하십시오 before changing accessories, performing maintenance, or when the tool is not in use.
- 최대 작동 압력을 초과하지 마십시오. of 6.3 bar (90 psi).
- Inspect the tool and accessories for damage before each use. Do not use damaged equipment.
- Keep hands and loose clothing away 회전 부품에서.
- Use only genuine Hazet accessories or those approved for use with this tool.
- 도구를 수정하지 마십시오 어떤 식으로든.
- Store the tool in a dry, secure place 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 제품 오버view
The Hazet 9033M-9 is a compact and lightweight pneumatic mini polisher designed for precision work in hard-to-reach areas and for spot repair applications. It features a robust multi-bearing gearbox for extended service life and an innovative 5-blade concept for enhanced power.
그림 1: Hazet 9033M-9 Mini Polisher. This image displays the compact design of the polisher, highlighting its ergonomic handle and the attached 50mm sanding disc, ready for precision work.
주요 특징:
- Optimized for spot repair and hard-to-reach areas.
- Extremely lightweight and handy design.
- Heavy-duty multi-bearing gearbox for extended service life.
- Innovative 5-blade concept for increased power.
- Cold insulated handle for user comfort.
- Safety release lever.
4. 설정
- 공기 공급 연결:
- Ensure your air compressor is capable of providing the recommended working pressure of 6.3 bar (90 psi) and an air consumption of 84 l/min (1.4 l/sec).
- Connect a suitable air hose (recommended diameter: 10mm) to the air connection inlet (internal thread 12.91 mm / 1/4 inch) on the polisher.
- Attach the included coupling plug (Nominal Diameter 7.2) to your air hose.
- 모든 연결이 안전하고 누출이 없는지 확인하십시오.
- Sanding Disc Attachment:
- Ensure the air supply is disconnected before attaching any accessories.
- The polisher uses a 50 mm sanding disc with a 5/16 inch UNF thread.
- Carefully screw the sanding disc onto the polisher's spindle until it is hand-tight. Do not overtighten.
5. 사용 설명서
- 준비:
- Ensure the workpiece is clean and securely positioned.
- Select the appropriate polishing compound or abrasive for your application.
- Starting the Polisher:
- 공기 공급 장치를 연결하십시오.
- Hold the polisher firmly with both hands, if possible, or with a secure grip.
- Press the safety release lever and then gently depress the trigger to start the tool. The speed can be controlled by the amount of trigger depression.
- 연마 기술:
- Apply light, even pressure to the workpiece. Avoid excessive force, which can lead to uneven results or damage to the surface.
- Move the polisher in a consistent pattern (e.g., overlapping passes) to ensure uniform coverage.
- For spot repair, focus on the affected area, blending outwards as needed.
- The exhaust air is directed through the handle, away from the work surface.
- Stopping the Polisher:
- 방아쇠를 놓으세요.
- Disconnect the air supply when finished or when leaving the tool unattended.
6. 유지관리
Regular maintenance ensures the longevity and optimal performance of your Hazet 9033M-9 Mini Polisher.
- 일일:
- Apply a few drops of pneumatic tool oil into the air inlet before and after each use.
- Clean the exterior of the tool with a soft, dry cloth.
- Check the air hose and connections for wear or damage.
- 주간/월간 (사용량에 따라):
- Inspect the sanding disc attachment point for any signs of wear or damage.
- Ensure the safety release lever and trigger operate smoothly.
- 작동 중에 이상한 소음이나 진동이 있는지 확인하세요.
- 저장:
- Store the polisher in a clean, dry environment, away from direct sunlight and extreme temperatures.
- 보관하기 전에 공기 공급 장치를 분리하십시오.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 도구가 시작되지 않거나 실행 속도가 느립니다. | Low air pressure or insufficient air supply. Air line obstruction. 윤활 부족. | Check compressor pressure and air flow. 에어 호스에 꼬임이나 막힘이 있는지 점검하십시오. Apply pneumatic tool oil to the air inlet. |
| 과도한 진동. | Damaged or improperly attached sanding disc. 내부 마모. | Inspect and re-attach or replace the sanding disc. Contact Hazet service for inspection. |
| 연결 부위에서 공기가 새어 나옵니다. | 느슨한 연결. O-링이나 씰이 손상되었습니다. | 모든 공기 연결부를 단단히 조이십시오. 손상된 O링이나 씰을 교체하십시오. |
8. 사양
| 특징 | 값 |
|---|---|
| 상표 | Hazet |
| 모델 번호 | 9033월-9일 |
| 샌딩 디스크 직경 | 50mm (XNUMXmm) |
| Sanding Disc Thread | 5/16 inch UNF |
| RPM(분당 회전수) | 4500 |
| 작동 압력 | 6.3바(90psi) |
| 공기 소비량 | 84 l/min (1.4 l/sec) |
| 전력 와트 | 224 와트 |
| Vibration Acceleration | 1.90m/초² |
| Sound Power Level (Lp W) | 94.4dB(암페어) |
| Sound Pressure Level (Lp A) | 83.6dB(암페어) |
| 순중량 | 0.6kg |
| 길이 | 151mm (XNUMXmm) |
| Air Connection Inlet | Internal thread 12.91 mm (1/4 inch) |
| Hose Diameter (recommended) | 10mm (XNUMXmm) |
| 재료 | 금속 |
참고: 제품 개선을 위해 사양은 예고 없이 변경될 수 있습니다.
9. 보증 및 지원
Hazet products are manufactured to high-quality standards and are subject to strict quality controls. This product comes with a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official Hazet web대지.
For technical support, spare parts, or service inquiries, please contact your authorized Hazet dealer or the Hazet customer service department. Contact information can typically be found on the Hazet web사이트 또는 제품 포장.
Official Hazet Web대지: www.hazet.de