소개
This manual provides detailed instructions for the safe and efficient use of your Brio Limited Edition Top Loading Countertop Water Cooler Dispenser, Model CLCTTL520. This appliance is designed to provide instant access to hot, cold, and room temperature water. Please read all instructions carefully before installation and operation to ensure proper function and safety.
이미지: 앞면 view of the Brio Limited Edition Top Loading Countertop Water Cooler Dispenser, showing the top-loading bottle, control panel, and dispensing area.
중요한 안전 정보
To reduce the risk of injury, electric shock, or property damage, always follow basic safety precautions when using electrical appliances. This includes, but is not limited to:
- 기기를 사용하기 전에 모든 지침을 읽으세요.
- 코드나 플러그가 손상된 경우 또는 기기가 오작동하거나 어떤 식으로든 손상된 경우에는 기기를 작동하지 마십시오.
- 기기가 올바르게 접지되었는지 확인하십시오.
- 코드, 플러그 또는 제품의 어떤 부분도 물이나 다른 액체에 담그지 마십시오.
- Supervise children when they are near the appliance. The hot water dispenser features a child safety lock.
- Use only bottled water suitable for water dispensers.
- 옥외에서는 사용하지 마십시오.
- 청소나 정비를 하기 전에는 항상 분배기의 플러그를 뽑아 두세요.
- Keep the back of the dispenser at least 4 inches (10 cm) from a wall to allow for proper ventilation.
설정
짐 풀기
Carefully remove the water cooler from its packaging. Inspect for any shipping damage. Retain packaging materials for future transport or service needs.
놓기
Place the dispenser on a flat, level, and sturdy surface capable of supporting its weight when a full water bottle is installed. Ensure it is in a cool, dry place, away from direct sunlight and heat sources. Allow adequate space around the unit for ventilation.
Image: Diagram showing the dimensions of the water cooler dispenser: Height 20.5 inches (52cm), Width 12 inches (30.5cm), Length 15.5 inches (39.4cm).
물병 설치
- Clean the exterior of the water bottle.
- 물병의 뚜껑을 제거하세요.
- Carefully lift the water bottle and place it onto the support collar on top of the dispenser. Ensure the bottle is seated firmly and water begins to flow into the dispenser's reservoirs.
Initial Flush and Power Connection
- Once the water bottle is installed, wait approximately 5 minutes for the reservoirs to fill.
- Place a cup under each dispensing spout (hot, cold, room temperature) and press the respective buttons until water flows continuously. This purges air from the system.
- 분배기를 접지된 전기 콘센트에 꽂으세요.
- Turn on the hot and cold water switches located on the back of the unit. Allow 15-30 minutes for the water to reach optimal temperatures.
비디오: 오버view of the Brio Top Loading Countertop Water Cooler Dispenser, demonstrating its features and ease of use. This video provides a visual guide to the product's design and functionality.
작업
물 분배
The dispenser offers three temperature options: hot, cold, and room temperature. Each has a dedicated push-button faucet.
- 차가운 물: Place a cup under the cold water spout and press the blue button.
- 실온의 물: Place a cup under the room temperature water spout and press the gray button.
- 뜨거운 물: This dispenser includes a child safety lock for hot water. To dispense hot water, simultaneously press the red child safety lock button and the red hot water button.
이미지: 위에서 아래로 view of the water cooler showing the three dispensing buttons for Hot, Room, and Cold water, illustrating the Tri-Temp Dispensing feature.
Water Bottle Replacement
When the water bottle is empty, carefully lift it off the dispenser. Replace with a new, full water bottle, ensuring it is seated correctly. The top-loading design allows for easy visual monitoring of water levels.
유지
물받이 청소
The removable drip tray should be emptied and cleaned regularly to prevent overflow and maintain hygiene. Simply slide the tray out, empty any collected water, wash with mild soap and water, rinse thoroughly, and reinsert.
일반 청소
디스펜서 외부를 부드러운 천으로 닦아주세요.amp cloth. Do not use abrasive cleaners or solvents. For internal cleaning, it is recommended to perform a full system flush every 3-6 months using a water cooler cleaning solution or a mixture of water and food-grade vinegar. Always unplug the unit and drain all water before internal cleaning.
스케일 제거
Over time, mineral deposits may accumulate in the hot water tank. To descale, unplug the unit and drain the hot water tank. Fill the hot tank with a descaling solution (e.g., citric acid solution or diluted vinegar) and let it sit for a few hours. Drain and rinse thoroughly before refilling with fresh water.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 물 분사 없음 | Empty water bottle; airlock in system. | Replace water bottle; press dispensing buttons until water flows. |
| 뜨거운 물/차가운 물이 나오지 않습니다 | Hot/cold switches off; unit not plugged in; insufficient time for heating/cooling. | Ensure switches on back are ON; check power connection; allow 15-30 minutes for temperature regulation. |
| 물이 새다 | Improperly seated water bottle; cracked water bottle; internal leak. | Re-seat bottle; check bottle for cracks; if internal leak, unplug and contact support. |
| 비정상적인 소음 | Normal operation (compressor/heating cycle); unit not level; loose components. | Ensure unit is on a level surface; check for loose parts. Some operational noise is normal. |
| Water has plastic taste | New unit; insufficient flushing. | Flush several gallons of water through all spouts. If taste persists, contact support. |
명세서
- 모델 번호: CLCTTL520
- 상표: 생기
- 색상: 검은색
- 재료: 스테인리스 스틸
- 제품 크기(깊이 x 너비 x 높이): 15인치 x 17.5인치 x 20.5인치
- 설치 유형: 카운터탑
- 접근 위치: 상단 로딩
- 온도 설정 : 3 (뜨거움, 차가움, 실온)
- 상한 온도 등급: 화씨 200도
- 전원: 코드식 전기
- 포함된 구성 요소: Top Loading Water Cooler Dispenser, Manual, Care Guide
- 인증: UL Listed, Energy Star Approved
Image: Visual representation of the Brio water cooler's features including Tri-temp push button faucet, Top Load design, Energy Star approval, UL Listing, and Conformance to NSF/ANSI 372 standards.
보증 및 지원
보증 정보
This Brio water cooler dispenser is covered by a Brio 1-year limited warranty. This warranty covers defects in materials and workmanship under normal use. Please refer to the included Care Guide for full warranty terms and conditions.
고객 지원
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Brio customer support. Contact information can typically be found on the manufacturer's web사이트 또는 포함된 문서에서 확인하세요.