중요 안전 지침
Please read and understand all instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- 경고: To avoid electric shock, always unplug the lamp from the power outlet before cleaning or changing the bulb.
- Do not use with a damaged cord or plug. If the cord or plug is damaged, discontinue use immediately and contact customer service.
- l을 담그지 마십시오.amp in water or any other liquid. This product is not waterproof.
- 전구 와트를 확보하십시오tage does not exceed the maximum specified (60W). Using a higher wattage bulb can cause overheating and fire.
- This product is designed for indoor use only. Do not use outdoors or in wet locations.
- 가연성 물질에서 멀리 두세요.
패키지 내용
모든 구성 요소가 존재하고 손상되지 않았는지 확인하세요.
- Feit Electric Gray Industrial Style Table Cube Lamp 베이스 (1)
- 참고: 전구는 포함되어 있지 않으며 별도로 구매해야 합니다.
Image: The Feit Electric CUBE1 Industrial Style Table Lamp Base shown in its retail packaging. The packaging highlights "Vintage Industrial Style" and "e26 MEDIUM BASE", indicating the bulb type.
설정 및 설치
Follow these steps to set up your new lamp 베이스:
- L 포장 풀기amp 베이스: 조심스럽게 l을 제거amp base from its packaging and place it on a clean, stable surface.
- 전구 선택: Choose an E26 (medium) base bulb (not included) with a maximum wattage of 60W. For optimal performance and energy savings, an LED bulb is recommended.
- 전구를 설치하십시오: l을 확인하세요amp is unplugged. Gently screw the chosen bulb clockwise into the lamp socket until it is snug. Do not overtighten, as this can damage the socket or the bulb.
- L을 위치시키세요amp: l을 놓으세요amp base on a stable, flat, and dry surface indoors, away from direct sunlight or heat sources.
- 전원에 연결: l을 꽂으세요amp's power cord into a standard 120V AC electrical outlet. Ensure the plug is fully inserted.
Image: The Feit Electric CUBE1 lamp base with an Edison-style LED bulb already installed, demonstrating the appearance once assembled and ready for use.
작동 지침
The Feit Electric CUBE1 lamp base features a convenient in-line mechanical on/off switch for simple operation.
- 켜기: Locate the mechanical switch on the power cord. Press the switch to the "ON" position to illuminate the bulb.
- 끄기: Press the switch to the "OFF" position to turn off the bulb.
이미지: 클로즈업 view of the black in-line mechanical on/off switch located on the braided electrical cord of the lamp, used for controlling power.
유지
적절한 관리를 통해 제품의 수명을 연장할 수 있습니다.amp 베이스.
- 청소: 항상 플러그를 뽑으십시오.amp 청소하기 전에 전원 콘센트에서 플러그를 뽑으세요.amp base with a soft, dry, non-abrasive cloth. Do not use liquid cleaners, abrasive cleaners, or solvents, as these may damage the finish.
- 전구 교체: l을 확인하세요amp is unplugged and the bulb has cooled completely before attempting to replace it. Screw out the old bulb counter-clockwise and screw in a new E26 base bulb (max 60W) clockwise.
문제 해결
만약 사용 중에 문제가 발생하면amp다음 표를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Lamp 켜지지 않습니다. | 1. 엘amp 가 꽂혀 있지 않습니다. 2. 전구가 느슨해졌거나 끊어졌습니다. 3. Power outlet is not functioning. 4. In-line switch is in the "OFF" position. | 1. Ensure the power cord is securely plugged into a working electrical outlet. 2. Tighten the bulb or replace it with a new, working E26 bulb. 3. Test the outlet with another appliance or check your home's circuit breaker. 4. Press the in-line switch to the "ON" position. |
| Lamp 깜빡임. | 1. 전구가 느슨합니다. 2. Bulb is incompatible or faulty. 3. 불안정한 전원 공급. | 1. 플러그를 뽑으세요.amp 전구를 조이세요. 2. Try a different E26 bulb. 3. l을 연결amp 다른 콘센트로. |
명세서
Key technical details for the Feit Electric CUBE1 Lamp 베이스:
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 큐브 1 |
| 상표 | 피트 일렉트릭 |
| 제품 크기(D x W x H) | 5.42인치 x 6.98인치 x 4인치 |
| 기본 소재 | 콘크리트 |
| 전구 베이스 유형 | E26(중) |
| 최대 와트tage | 60 와트 |
| 스위치 유형 | In-line Mechanical On/Off |
| 전원 | 코드식 전기 |
| 사용환경 | 실내 전용 |
보증 및 지원
This Feit Electric product is backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Feit Electric web대지.
For technical assistance, troubleshooting not covered in this manual, or to inquire about warranty service, please contact Feit Electric Customer Service:
- 피트 일렉트릭 Web대지: www.feit.com
- 문의하기 페이지: www.feit.com/contact-us/
- Feit Electric Amazon Store: 매장 방문