소개
This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Star Micronics TSP143IIIU USB Thermal Receipt Printer. Designed for efficiency and ease of use, this printer offers high-speed thermal printing, a reliable auto-cutter, and versatile USB connectivity for various point-of-sale environments.
그림 1: 앞쪽 view of the Star Micronics TSP143IIIU USB Thermal Receipt Printer. This image displays the compact design and the paper output slot.
패키지 내용
Please verify that all items listed below are included in your printer package. If any items are missing or damaged, contact your vendor immediately.
- Star Micronics TSP143IIIU Thermal Receipt Printer with Auto-cutter
- 내부 전원 공급 장치
- 6피트 USB 케이블
- Power Switch Cover
- Easy Setup Guide (this manual serves as a comprehensive guide)
- Test Paper Roll
- 안전 지침
설정
1. 물리적 연결
- 전원 연결: Plug the power cord into the printer's power input and then into a standard electrical outlet.
- 용지 로드: Open the printer's top cover. Insert a thermal paper roll (80mm width) into the compartment, ensuring the paper feeds from the bottom and extends past the auto-cutter. Close the cover firmly.
- USB 연결: Connect one end of the provided USB cable to the USB port on the printer and the other end to an available USB port on your computer or POS system. The TSP143IIIU features a USB serial number function, allowing the PC to detect the printer on its Windows platform using any USB port.
그림 2: 뒤쪽 view of the printer, highlighting the USB and power connections. Ensure cables are securely connected.
2. Driver Installation (Plug and Print)
For most modern operating systems (e.g., Windows), the TSP143IIIU is designed for "Plug and Print" functionality. Once connected via USB, your system should automatically detect and install the necessary drivers. If automatic installation does not occur, please visit the Star Micronics official web최신 드라이버 다운로드 및 설치 지침을 제공하는 사이트입니다.
작동 지침
1. 기본 인쇄
- Ensure the printer is powered on and connected to your computer/POS system. The 힘 indicator light should be illuminated.
- From your application (e.g., POS software), initiate a print command.
- The printer will automatically feed and print the receipt, then use its integrated auto-cutter to cleanly separate the receipt.
2. Using PromoPRNT and futurePRNT Software
The TSP143IIIU supports advanced features through Star Micronics' software:
- PromoPRNT: This service allows for automatic printing of promotional content alongside standard receipts. Refer to the PromoPRNT documentation on the Star Micronics website for setup and configuration.
- futurePRNT Software: This software suite enables customization of receipts with graphics (logos, coupons) and word-triggered advertising. It also includes a "De-Curl" function to ensure flat receipts. Download and install futurePRNT from the official Star Micronics support page for full functionality.
유지
1. 프린터 청소
- 외부: 프린터 외부를 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 열전사 프린트 헤드: Regularly clean the thermal print head using a specialized thermal printer cleaning pen or isopropyl alcohol on a cotton swab. Ensure the printer is powered off and cooled down before cleaning. Gently wipe the print head surface.
- 종이 먼지: Periodically remove any paper dust or debris from the paper path and cutter area using a soft brush or compressed air.
2. 용지 롤 교체
When the paper roll is nearly empty, a red line will appear on the paper, indicating it's time for replacement. Follow the paper loading instructions in the "Setup" section to replace the roll.
문제 해결
Refer to the indicator lights on the front panel for quick diagnostics:
- POWER Light (Green): Indicates the printer is powered on. If off, check power connections.
- ERROR Light (Red): Indicates a printer error. Common errors include:
- 단색 빨간색: Paper out or cover open. Load paper or close cover.
- 빨간색으로 깜박임: Print head overheating or other internal error. Power cycle the printer. If the issue persists, contact support.
- 피드 버튼: Press to manually feed paper. If paper does not feed, check for jams or ensure a new roll is properly loaded.
일반적인 문제 및 해결책:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 프린터의 전원이 켜지지 않습니다. | 전원 코드가 분리되었습니다. 전원 콘센트가 고장났습니다. | 전원 코드 연결을 확인하고 다른 콘센트에 꽂아보세요. |
| 인쇄가 되지 않습니다. | Printer not connected to computer; drivers not installed; paper out; application error. | Verify USB connection; install drivers; load paper; restart application/computer. |
| 종이 걸림. | 용지 공급 불량; 용지 경로에 이물질이 있습니다. | Open cover, remove jammed paper carefully, reload paper correctly. |
| 인쇄 품질이 좋지 않습니다. | Dirty print head; low-quality thermal paper. | Clean print head; use recommended thermal paper. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 스타 마이크로닉스 |
| 모델 번호 | TSP143IIIU |
| 연결 기술 | USB |
| 인쇄 기술 | 열의 |
| 프린터 출력 | 단색화 |
| 최대 인쇄 속도 흑백 | 28 ppm (43 receipts per minute) |
| 해결 | 203 x 203dpi |
| 품목 무게 | 3.8 파운드 |
| 품목 치수(D x W x H) | 8.03인치 깊이 x 5.59인치 너비 x 5.2인치 높이 |
| 인쇄 매체 | 용지 (일반 감열지) |
| 최대 미디어 크기 | 80mm x 62mm |
| 내장 미디어 | Auto-cutter, Internal Power Supply |
| 특별 기능 | Decal Printing, Network Ready (via specific models/accessories), MFi USB Ports (for certain models, though this one is general USB) |
| 호환 장치 | PC |
보증 정보
This Star Micronics TSP143IIIU printer comes with a 90일 한정 보증. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to initiate a warranty claim, please refer to the documentation provided with your purchase or contact the vendor from whom you purchased the product.
지원하다
For further assistance, technical support, or to download the latest drivers and software, please visit the official Star Micronics website. You may also contact your product vendor for direct support related to your purchase.
- 온라인 리소스: 스타 마이크로닉스 지원 Web대지
- Contact Vendor: Refer to your purchase documentation for vendor contact information.